Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3   Go Down

Author Topic: hohner pokework d/g chinese construction  (Read 15226 times)

0 Members and 1 Guest are viewing this topic.

cool breeze

  • Member
  • *
  • Offline Offline
  • Posts: 5
hohner pokework d/g chinese construction
« on: September 08, 2010, 01:17:30 PM »

I have heard to avoid chinese constructed hohner pokerworks.  How do you know what you are buying?  Are new ones that you buy at either a reputable online shop or a high street all made in China and only the older second hand ones constructed in Germany? Nowadays, you can buy excellent branded guitars that are now made in Korea etc but they are great. Any advice please (:)
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: hohner pokework d/g chinese construction
« Reply #1 on: September 08, 2010, 01:24:52 PM »

Any new Hohner pokerwork or Erica will have been made in China. You can recognise the Chinese pokerworks because of the garish brightness of the gold design,  German built ones were much less bright, even when new.  Early example of Chinese Hohners were reported to have a high rate of spring breakage,  but springs can break on German ones too.  I don't think there is anything wrong with them, apart from the shortcomings that also affect the German ones, of "approximate" tuning, and treble buttons able to disappear down the holes in the fingerboard, and noisy pallets.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: hohner pokework d/g chinese construction
« Reply #2 on: September 08, 2010, 01:28:44 PM »

Well... I would give preference to a German built Hohner, but the Chinese ones are not as bad as it sounds - mostly.  The Quality Control is a bit patchy, but the products not all bad and can be fettled into a good box.  As far as I know, yes all current Pokerworks are Chinese built.  A German one will have Made in Germany on the back of the keyboard.

Rob
Logged

Andrew Wigglesworth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1101
  • 07
    • My website
Re: hohner pokework d/g chinese construction
« Reply #3 on: September 08, 2010, 05:54:22 PM »

I temporarily kidnapped several of the new Chinese Pokerworks when they started to appear and found that they were, well, Hohner Pokerworks. They felt and sounded as they ever had.

The Chinese are pretty good at making stuff ye know  ;)

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: hohner pokework d/g chinese construction
« Reply #4 on: September 08, 2010, 06:31:04 PM »

The trick with cheap Chinese things (whether it's melodeons, microphones or anything else they make) where quality control is a bit variable, is to try out several and pick a good one.

Rumour has it that the more recent Chinese boxes are better made then the earlier ones.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: hohner pokework d/g chinese construction
« Reply #5 on: September 08, 2010, 09:26:44 PM »

The trick with cheap Chinese things (whether it's melodeons, microphones or anything else they make) where quality control is a bit variable, is to try out several and pick a good one.

Rumour has it that the more recent Chinese boxes are better made then the earlier ones.


The same was ever true with Hohners -- when Smiffs used to own team boxes (we got through one a year) I always went down to CSH (when Gordon Potts ran the Folk Shop) and tried out several and picked the best one -- and there were always noticeable differences.

Ian
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: hohner pokework d/g chinese construction
« Reply #6 on: March 12, 2012, 03:50:57 PM »

I have had two chinese pokerworks through my workshop recently and thought I would share my thoughts for what they are worth:

  • The build quality is not as good as the German ones, eg the reeds blocks are not held laterally by the two locating blocks as well as in German ones, odd mixture of slotted and crosshead screws
  • The reeds are not as good the German ones, appear to be made of thinner stock and the reeds plates look cheap and cheerful
  • The pallet facings is very much better, so no Hohner Clack
  • The bellows tape is extremely poor quality paper tape
  • The saving grace on the bellows tape is the glue is even worse quality so getting the tape off is easy
  • The treble action is odd, the buttons seem to be at a strange angle to the face of the keyboard when they pressed down. ie on a German box when the button is flush with the keyboard the face of the button is flat to the keyboard whereas on the chinese the buttons are still at an angle

Mind you both have sounded perfectly good after some TLC

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: hohner pokework d/g chinese construction
« Reply #7 on: March 12, 2012, 06:03:53 PM »

I think the big advantage of the Pokerwork and pre-Pokerwork design is how easy it is to fix and repair, and the fact that we can still find new parts.
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: hohner pokework d/g chinese construction
« Reply #8 on: March 12, 2012, 06:58:19 PM »

Nowadays, you can buy excellent branded guitars that are now made in Korea etc but they are great. Any advice please (:)

I have no idea whether the same thing applies to melodeons, but Chinese-built and Korean-built guitars are worlds apart. I have several Korean-made guitars (from the Samick factory) which are very nearly as good as the US originals they are based on; some time ago I bought a Chinese-built equivalent and I couldn't get rid of it fast enough.  I also have an Indonesian-built Telecaster that is not at all bad........

I've never tried a Chinese melodeon, and on the basis of my experience with guitars probably wouldn't be persuaded.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

AirTime

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 979
Re: hohner pokework d/g chinese construction
« Reply #9 on: March 13, 2012, 05:16:55 PM »

I find it hard to believe that there is anything inherent to Chinese manufacturing that would result in an inferior instrument. The key is the experience of the workers & the quality control exercised by the company that commissions & sells the finished product. We've all seen how Japanese manufacturing improved over the decades, followed by the same thing with Korean. I imagine Chinese manufacturing will follow the same pattern.

I have a Chinese-made mandolin that is very high quality - I don't see why a Chinese factory couldn't make a high-quality accordion. I think the responsibility really lies with Hohner to control the production standards.
Logged
1920's BbEb Hohner; 1920's  AD Koch; 1910 (?) One-row Hohner in D,  1910's GCB Maga Ercole; ; AD 1950's Pistelli, CF Sandpiper, CF Preciosa, BbEb Preciosa.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: hohner pokework d/g chinese construction
« Reply #10 on: March 13, 2012, 05:22:29 PM »

I find it hard to believe that there is anything inherent to Chinese manufacturing that would result in an inferior instrument. The key is the experience of the workers & the quality control exercised by the company that commissions & sells the finished product. We've all seen how Japanese manufacturing improved over the decades, followed by the same thing with Korean. I imagine Chinese manufacturing will follow the same pattern.

I have a Chinese-made mandolin that is very high quality - I don't see why a Chinese factory couldn't make a high-quality accordion. I think the responsibility really lies with Hohner to control the production standards.

I fully agree with the drift of your post. The problem with the Chineses pokerworks, in my opinion, is not that they are made in China and are therefore inferior but that the quality of the reeds has been reduced. This happened when the manufacture moved but is not necessarily the result of the move much more likely to have been a management cost cutting advance  ;D

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: hohner pokework d/g chinese construction
« Reply #11 on: March 13, 2012, 06:54:32 PM »

I have a Chinese-made mandolin that is very high quality - I don't see why a Chinese factory couldn't make a high-quality accordion. I think the responsibility really lies with Hohner to control the production standards.

I have a Chinese mandolin too - an F-model. It's rubbish.  I also have a Korean A-model - a very nice instrument. Recently I played a friend's Chinese A-model; it was rubbish as well.  Neither the Korean nor the Chinese jobs are on anything like the same planet as a UK hand-made model belonging to another friend. I'm very much afraid the story with boxes will be similar.......
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

AirTime

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 979
Re: hohner pokework d/g chinese construction
« Reply #12 on: March 14, 2012, 02:38:11 AM »

Quote
I have a Chinese mandolin too - an F-model. It's rubbish.  I also have a Korean A-model - a very nice instrument. Recently I played a friend's Chinese A-model; it was rubbish as well.  Neither the Korean nor the Chinese jobs are on anything like the same planet as a UK hand-made model belonging to another friend. I'm very much afraid the story with boxes will be similar.......

Well, interestingly enough, my Chinese mandolin is branded by a small US seller with a very good reputation, who used to have his instruments manufactured in Korea. He recently switched to China. My "high-end" Chinese F-model mando is very nicely made, sounds good & plays very well. I would say it's equivalent to an American-made mandolin costing at least twice as much.  I think it's now widely accepted that Chinese mandolins offer excellent quality for the money. High-end Chinese mandolins are decent instruments by any standards, although they may be inferior to the best quality, much more expensive, hand-made mandolins.

The difference with accordions is that there don't appear to be any "high-end" Chinese boxes - nothing that is trying to compete with Castagnaris or other smaller volume makers. I guess the closest thing would be the Hohner Morgane line (if they are actually made in China?), or the Sandpiper.
Logged
1920's BbEb Hohner; 1920's  AD Koch; 1910 (?) One-row Hohner in D,  1910's GCB Maga Ercole; ; AD 1950's Pistelli, CF Sandpiper, CF Preciosa, BbEb Preciosa.

Gandy

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 407
Re: hohner pokework d/g chinese construction
« Reply #13 on: March 14, 2012, 01:27:20 PM »

I find it hard to believe that there is anything inherent to Chinese manufacturing that would result in an inferior instrument.
But if the move to China was to reduce cost, then it may signal other cost-cutting changes which as you imply could perfectly well have been made which keeping production in Germany.
Logged
Tony S

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: hohner pokework d/g chinese construction
« Reply #14 on: March 14, 2012, 01:41:49 PM »

While agreeing with the general opinion that Hohner quality is not quite as good since production moved to China, there is one significant improvement: bellows frames.  Later German bellows frames are moulded from a black plastic which is not sufficiently rigid, and is prone to pin holes breaking out.    Since the move to China they have reverted to good solid wooden bellows frames.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: hohner pokework d/g chinese construction
« Reply #15 on: March 14, 2012, 01:48:08 PM »

I find it hard to believe that there is anything inherent to Chinese manufacturing that would result in an inferior instrument.
Remember, back in the 1960's, things "Made in Japan" would be considered junk...
During the last decade I have seen the quality of other musical instruments made in China evolve from poor to good to very good. Jupiter wind instruments is one example.
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Andrew Wigglesworth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1101
  • 07
    • My website
Re: hohner pokework d/g chinese construction
« Reply #16 on: March 14, 2012, 03:08:40 PM »

I find it hard to believe that there is anything inherent to Chinese manufacturing that would result in an inferior instrument.
Remember, back in the 1960's, things "Made in Japan" would be considered junk...
During the last decade I have seen the quality of other musical instruments made in China evolve from poor to good to very good. Jupiter wind instruments is one example.


They're establishing themselves in the market and building instruments to a cost.

Basically as you say.

Who right now would pay $costalotti  prices for a Chinese instrument? Not many, they'd buy the $costalotti and bask in it's reputation and caché, so the Chinese take up the part of the market that they can (which was once filled by German manufacturers).

Mike Averill

  • suffering from MAD
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 325
Re: hohner pokework d/g chinese construction
« Reply #17 on: March 14, 2012, 07:21:37 PM »

I think a lot of people judge their new Chinese Hohner against old, well fettled, German Hohners. The qualilty of the latter comes from the years of reworking,fine tuning, and natural selection ( the crap boxes get stripped for spares rather than sold on secondhand) rather than better original manufacture.

Over the years I've had a new German and a new Chinese Hohner. Both were equally badly tuned when new. Very little difference otherwise.
Logged
Hohner - 1 row 4 stop C and G, pokerwork DG, DoubleRay DC#, Corso CC#, Corona III ADG, CLUB X CF, Elysium II CF
Saltarelle 1 row 4 stop D, Castagnari Giordy DG, Sander DG
Sonola CC#, Walters DC#

Andrew Wigglesworth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1101
  • 07
    • My website
Re: hohner pokework d/g chinese construction
« Reply #18 on: March 14, 2012, 07:48:47 PM »

I think a lot of people judge their new Chinese Hohner against old, well fettled, German Hohners. The qualilty of the latter comes from the years of reworking,fine tuning, and natural selection ( the crap boxes get stripped for spares rather than sold on secondhand) rather than better original manufacture.

Over the years I've had a new German and a new Chinese Hohner. Both were equally badly tuned when new. Very little difference otherwise.

A very good point.

AirTime

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 979
Re: hohner pokework d/g chinese construction
« Reply #19 on: March 15, 2012, 03:58:03 PM »

Quote
They're establishing themselves in the market and building instruments to a cost.

Basically as you say.

Who right now would pay $costalotti  prices for a Chinese instrument? Not many, they'd buy the $costalotti and bask in it's reputation and caché, so the Chinese take up the part of the market that they can (which was once filled by German manufacturers).

You're exactly right. I think it would be interesting to know if there is a significant domestic market for accordions in China. I would bet that the cheap Chinese boxes that find their way to Europe & NA sell for a lot less in China.

I think a more pertinent criticism would be of Hohner & why they have not fixed the obvious short-comings of the Pokerworks/Erica line over the years - shortcomings which have continued irrespective of where the boxes were manufactured. I think that all that would be required is for an independent importer to travel to China & spec a higher quality box with better components - presumably this is what what was done with the Sandpiper. It also seems to be what was done with the Hohner Morgane line - although it seems unclear exactly where they are made.
Logged
1920's BbEb Hohner; 1920's  AD Koch; 1910 (?) One-row Hohner in D,  1910's GCB Maga Ercole; ; AD 1950's Pistelli, CF Sandpiper, CF Preciosa, BbEb Preciosa.
Pages: [1] 2 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal