Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Re-waxing  (Read 4607 times)

0 Members and 1 Guest are viewing this topic.

Ollie

  • Grumpy Young Git
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1900
    • Ollie King
Re-waxing
« on: September 08, 2010, 02:56:20 PM »

I was playing my Erika the other day, when I noticed that my Bb push bass was grumbling a bit, so I opened it up to see what the problem was. The wax is think, cracked and dried, and this particular reed plate is very wobbly; looks like it's only held in by the two pins. In need of a re-wax methinks. Is this something I can attempt at home? If not, what would the approximate cost be?
Logged
Hohner Erika 12 bass D/G : Hohner Erika Bb/Eb : Hohner 1 row 4 stop D : Hohner Erica 9 bass D/G :

http://www.olliekingmusic.com/

Free-Reed Specialist, Hobgoblin Leeds

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Re-waxing
« Reply #1 on: September 08, 2010, 03:00:26 PM »

I was playing my Erika the other day, when I noticed that my Bb push bass was grumbling a bit, so I opened it up to see what the problem was. The wax is think, cracked and dried, and this particular reed plate is very wobbly; looks like it's only held in by the two pins. In need of a re-wax methinks. Is this something I can attempt at home? If not, what would the approximate cost be?

Don't let Theo see this - but a quick "temporary" fix I have used with success is to heat a pen knife blade or similar over a flame and run it round the wax to melt it , when it hardens the reed will be better fixed.

Ollie

  • Grumpy Young Git
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1900
    • Ollie King
Re: Re-waxing
« Reply #2 on: September 08, 2010, 03:12:37 PM »

I was playing my Erika the other day, when I noticed that my Bb push bass was grumbling a bit, so I opened it up to see what the problem was. The wax is think, cracked and dried, and this particular reed plate is very wobbly; looks like it's only held in by the two pins. In need of a re-wax methinks. Is this something I can attempt at home? If not, what would the approximate cost be?

Don't let Theo see this - but a quick "temporary" fix I have used with success is to heat a pen knife blade or similar over a flame and run it round the wax to melt it , when it hardens the reed will be better fixed.

I'm not sure there's enough wax there to be able to do that!
Logged
Hohner Erika 12 bass D/G : Hohner Erika Bb/Eb : Hohner 1 row 4 stop D : Hohner Erica 9 bass D/G :

http://www.olliekingmusic.com/

Free-Reed Specialist, Hobgoblin Leeds

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Re-waxing
« Reply #3 on: September 08, 2010, 04:12:36 PM »

I'm pretty sure Theo would tell you to scrape off all the old wax as it will never hold properly again.  There are several methods preferred by different repairers - a pouring spoon, hot iron and wax stick or a pot of molten wax and paintbrush.  Charlie Marshall has a video of the last method, although it has been suggested that an improvement would be to use a kind of bain-marie rather than heating the wax directly over a flame.  he also sells wax in various forms either direct or via ebay.

Rob.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Re-waxing
« Reply #4 on: September 08, 2010, 04:19:05 PM »

I avert my eyes! :'(
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Ollie

  • Grumpy Young Git
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1900
    • Ollie King
Re: Re-waxing
« Reply #5 on: October 25, 2010, 08:14:41 PM »

Beginning to wish I hadn't put this off. The reedplate has now fallen out. Any temporary solutions to keep it in place and playable, or will I have to wait until I can get someone to re-wax it?
Logged
Hohner Erika 12 bass D/G : Hohner Erika Bb/Eb : Hohner 1 row 4 stop D : Hohner Erica 9 bass D/G :

http://www.olliekingmusic.com/

Free-Reed Specialist, Hobgoblin Leeds

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Re-waxing
« Reply #6 on: October 25, 2010, 08:23:24 PM »

Candle wax will do for a temporary repair.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Re-waxing
« Reply #7 on: October 26, 2010, 12:03:47 AM »

Beginning to wish I hadn't put this off. The reedplate has now fallen out. Any temporary solutions to keep it in place and playable, or will I have to wait until I can get someone to re-wax it?

If you're desperate I'm putting an order in with Charlie Marshall within the next few days, but I'd prefer to try rewaxing my junk box first :P One of my club's reedplates has fallen out, I tried sticking it in with masking tape (taking care not to touch the reed) but it didn't work. At all. It's grounded until I rewax it.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Re-waxing
« Reply #8 on: October 26, 2010, 12:55:21 PM »

I'm planning on removing and refitting some reeds shortly. Is there a way of telling when the wax has reached the end of its useful life and needs to be replaced?

I was planning on using a craft knife to cut the wax round the reed frame to remove it, and an old electric soldering iron to re-flow it.

Malcolm
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Re-waxing
« Reply #9 on: October 26, 2010, 01:31:29 PM »

I'm planning on removing and refitting some reeds shortly. Is there a way of telling when the wax has reached the end of its useful life and needs to be replaced?

I was planning on using a craft knife to cut the wax round the reed frame to remove it, and an old electric soldering iron to re-flow it.

Malcolm

From what I've heard then you shouldn't reuse old wax like that. As for telling, I have no idea except for seeing whether it has cracked.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Re-waxing
« Reply #10 on: October 26, 2010, 02:01:09 PM »

Its best to use fresh wax,  even not very old wax seems not to flow properly when re-melted.  You can buy it from Charlie Marshall.
I would not use a craft knife.   You really want something with a blunt blade that can scrape away the wax without cutting into the wood. I use an old kitchen knife which the tip broke of and I have it ground square at the end
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Re-waxing
« Reply #11 on: October 26, 2010, 02:28:55 PM »

Its best to use fresh wax,  even not very old wax seems not to flow properly when re-melted.  You can buy it from Charlie Marshall.
I would not use a craft knife.   You really want something with a blunt blade that can scrape away the wax without cutting into the wood. I use an old kitchen knife which the tip broke of and I have it ground square at the end

Or alternatively my weapon of choice for removing old wax a 6" metal ruler

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Re-waxing
« Reply #12 on: October 26, 2010, 02:54:29 PM »

Don't use the soldering iron at full temperature, it will burn the wax.
You can buy a purpose built temperature controller or an ordinary household dimmer switch will work just as well.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Re-waxing
« Reply #13 on: October 26, 2010, 04:01:20 PM »

Thanks for the hints.

I'm on a steep learning curve, but I reckon I can make or modify to generate the required tools. Just thrown out some dimmers, and a lump of beeswax (of indeterminate age) - and given away a pot for melting wax...

Malcolm
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Re-waxing
« Reply #14 on: October 26, 2010, 05:44:19 PM »

For remelting wax, I use an iron made for those lacquer burn in sticks.  It doesn't get as hot as a soldering iron and is thin enough to fit between the reeds. 

For waxing I use an medicine dropper, preferable the one with the curved tip.  How ever you do it be careful about dropping wax on the reeds and valves. Wax seems to love to try to do that.  Also can flow over the edge of the reed plate if you get to anxious flowing it.

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Re-waxing
« Reply #15 on: October 26, 2010, 08:14:32 PM »

For remelting wax, I use an iron made for those lacquer burn in sticks.  It doesn't get as hot as a soldering iron and is thin enough to fit between the reeds. 


Ooh, where do I find one of those?
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Re-waxing
« Reply #16 on: October 26, 2010, 08:21:14 PM »

This is the one I have. http://www.rockler.com/product.cfm?page=17639&filter=lacquer%20burn%20in

The blade is great, and even bendable for getting between reeds, and the temp is about right.  The blade is also removable.  I made a wire tip that I can put on to get the lower section of the reeds on the stand up blocks.

Ebor_fiddler

  • Chris
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2340
  • Hohner 1040 C One-Row, Sandpiper D/G, Liliput C/F
    • Ebor Morris
Re: Re-waxing
« Reply #17 on: October 26, 2010, 11:22:20 PM »

As a Yorkshireman, the first thing I checked was the price. An amateur "repairer" like myself could never justify buying one, but I do like Rees' recommendation of a dimmer switch in the circuit with a soldering iron. When I did my Hohner, I had to use a modeller's soldering iron at full blast applied (VERY) judiciously - not an easy task.  :(
Logged
I'm a Yorkie!
My other melodeon's a fiddle, but one of my Hohners has six strings! I also play a very red Hawkins Bazaar in C and a generic Klingenthaler spoon bass in F.!! My other pets (played) are gobirons - Hohner Marine Band in C, Hohner Tremolo in D and a Chinese Thingy Tremolo in G.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal