Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Curling reed!  (Read 3274 times)

0 Members and 1 Guest are viewing this topic.

NeilA

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 247
  • Nuage C#D, Yvus Pyrenees DG, Hohner Preciosa EbBb,
    • youtube channel
Curling reed!
« on: September 10, 2010, 05:58:35 PM »

I recently bought a Liliput which is in very good condition. There were however some reeds rattling about inside the box and on opening it up, seven reeds had come loose and one of them had developed a curl. I say curl because it is a very even bend and doesn't look like it has been forced. Is this possible and can reeds distort like this or has Mr Geller been near it?
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Curling reed!
« Reply #1 on: September 10, 2010, 06:30:02 PM »

Ouch!  :(
Reeds don't do this of their own accord. My guess is that whatever trauma caused the reed plates to become loose also contributed to this sorry state. It's likely that something became wedged under the reed tongue somehow. A combination of several loose reeds and the inside of the bellows, possibly? Working the bellows when there are loose reed plates around and something getting caught seems a plausible theory to me...

With care, it ought to be possible to return it to somewhere near its original state. Just go carefully, easing it back into the slot a bit at a time. You need to avoid any sudden kinks.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

NeilA

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 247
  • Nuage C#D, Yvus Pyrenees DG, Hohner Preciosa EbBb,
    • youtube channel
Re: Curling reed!
« Reply #2 on: September 10, 2010, 08:00:44 PM »

Unfortunately it is sprung in that position and I think I would need to bend it in an equal and opposite direction to get it back to the level. I think I'll leave it to an expert to see what they can do with it or if a replacement reed would be required.
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Curling reed!
« Reply #3 on: September 10, 2010, 08:51:01 PM »

There's a large crowbar in the corner of my workshop, which I use for just such a task.  ;)
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Mike Averill

  • suffering from MAD
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 325
Re: Curling reed!
« Reply #4 on: September 10, 2010, 09:42:16 PM »

Most likely it developed tuning problems and its owner decided to disable it rather than have a wonky note.
Logged
Hohner - 1 row 4 stop C and G, pokerwork DG, DoubleRay DC#, Corso CC#, Corona III ADG, CLUB X CF, Elysium II CF
Saltarelle 1 row 4 stop D, Castagnari Giordy DG, Sander DG
Sonola CC#, Walters DC#

NeilA

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 247
  • Nuage C#D, Yvus Pyrenees DG, Hohner Preciosa EbBb,
    • youtube channel
Re: Curling reed!
« Reply #5 on: September 10, 2010, 09:45:37 PM »

Most likely it developed tuning problems and its owner decided to disable it rather than have a wonky note.

Sounds a bit like breaking your fingers to stop you playing bum notes  ;D
Logged

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Curling reed!
« Reply #6 on: September 10, 2010, 10:24:56 PM »

Neil,

As one nervously awaiting arrival of a Liliput from Austria you have my sympathy :( Theo had mentioned this was a not infrequent problem due to their compactness minimising the amount of wax holding them in....

Below a before and after of one of the several banana'd reeds in an ancient Hohner which I had been posting progress on under a separate thread. While these are bronze rather than steel reeds the same principles may help and if all else fails Theo or Rees will no doubt be able to either fit a new reed or reedblock (particularly if it had been deliberately bent to avoid foul noises from it)

I used some PTFE strip as I didnt want to damage the bronze but wood or even a metal softer than steel would probably work but NO sharp edges.

As the bend is not right angled there is a chance that by having an 'anvil' a wider or do I mean longer bit in the slot than the little white pip you can see in the attached pic. which is clamped in a vice (i took off the leather valve underneath) then stroke or wipe the reed down with some firm strokes, difficult to write how but if you have ever curled a strip of paper or card with a rule(r) its the same sort of action. by positioning the angle of anvil reed and wiper you should be able to make a continuous curve rather than a series of small bends which brings the reed straight.

Of course the chances are high that this exercise will terminate in an aggravating 'ping' followed by some serious melodeoneese - but if you do flatten it OK think of the experience you have gained for next time as I presume Preciosa's are weak in this area too ;)

Richard - now considering if unbroken fingers are the root cause of his musical malady
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Curling reed!
« Reply #7 on: September 10, 2010, 10:26:54 PM »

OOps sent the wrong after pic

Richard
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

NeilA

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 247
  • Nuage C#D, Yvus Pyrenees DG, Hohner Preciosa EbBb,
    • youtube channel
Re: Curling reed!
« Reply #8 on: September 10, 2010, 10:56:06 PM »

Thanks for that Richard. I might give it a try and see if I can flatten it.

Logged

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Curling reed!
« Reply #9 on: September 10, 2010, 11:07:49 PM »

Thanks for that Richard. I might give it a try and see if I can flatten it.



Nothing to loose and possibly a new skill to aquire Neil - Theo recommends practice tuning on old accordion reeds, if you had one or two handy you could bend and then flatten to get the feel of it.

Hope it works out - will be reporting on the arrival of mine if the bellows are full of reedplates jangling around, or in deed if there are any reeds and not just an empty case  ;)

Keep us posted on any other probs. to look out for as you get yours fettled

Richard
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Curling reed!
« Reply #10 on: September 11, 2010, 07:53:22 AM »

I believe I'm right. That's actually the bimetal strip in the melodeon's internal thermostat. Wow, the previous owner must  been playing some pretty hot stuff to to that to it!  ;)

Exactly the same happened to my Lad's snowman in last winter's freeze (see 'thread drift')

But I digress



Logged
  _       _    _      _ 

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Curling reed!
« Reply #11 on: September 11, 2010, 03:45:25 PM »

I believe I'm right. That's actually the bimetal strip in the melodeon's internal thermostat. Wow, the previous owner must  been playing some pretty hot stuff to to that to it!  ;)


 ;D ;D

If only you could link them to the stops to keep opening voices as the temperature increases :P

Do you think the Wesson range of boxes are fitted with a daimetallic strip instead Chris ?

Richard
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal