Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner Echo Reeds  (Read 3171 times)

0 Members and 1 Guest are viewing this topic.

nomad

  • Good talker
  • **
  • Offline Offline
  • Posts: 70
Hohner Echo Reeds
« on: September 18, 2010, 10:22:27 PM »

Hi

I am in the process of bringing an old Echo out of early retirement. I am ok with the external things and sorting out the button travel, but haven't a clue about reeds.

Can you tell by looking at them if they are ok? I have put on a couple of pictures but not sure if they are clear enough.
I have reed about rust on reeds, in general they appear to be mostly rust free, the odd reed looks as though there is a speckle or two on them, but doesn't look a lot.

All notes play on both side and from what i can make out are in tune. The problem is I am getting a lot of rasping on some, more noticeably on the base notes.

Will welcome any advise.

Thanks
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner Echo Reeds
« Reply #1 on: September 18, 2010, 10:56:30 PM »

A few small rust spots are not important.

The rasping sound on the low notes is caused by the valves.  The valves on the larger reeds from this era of Hohner usually consist of a layer of soft synthetic material covered with one or more layers of smooth plastic film.  Thesift material us meant to have similar properties to leather,  but over time  it becomes stiff and hard and makes the noise you describe. The solution is to take all the noisy reeds off the reedblocks,  replace their valves and re-wax the reedplates back onto the reedblocks.  The tuning should be checked too because changing valves can alter the pitch of a reed.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

nomad

  • Good talker
  • **
  • Offline Offline
  • Posts: 70
Re: Hohner Echo Reeds
« Reply #2 on: September 18, 2010, 11:21:20 PM »

hi

Your description of the valves is spot on that what i have. (know i know what a valve is) would i be right in saying it is called a valve because it closes against the metal part ( is this the reed) and stops the air then the reed moves to make the sound.

Think i will need to buy a book, do you know any good ones that would show me what to do. Any idea what a ball part figure per reed would be, to remove, re valve, refit then tune, would be.
Logged

Gandy

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 407
Re: Hohner Echo Reeds
« Reply #3 on: September 20, 2010, 08:10:00 AM »

Hi,

My Echo had a couple of weak notes when I first got it, one reed didn't play at all.   That was fixed by giving it a good clean to get the dust out of the innards.   I used a "Giottos Rocket" dust blower, as used for cleaning cameras ...

http://www.giottos.com/Rocket-air.htm

It was surprising how much dust came out, and the instrument seemed to play easier after the clean as well as getting the weak notes back again.

Logged
Tony S

HallelujahAl

  • Guest
Re: Hohner Echo Reeds
« Reply #4 on: September 20, 2010, 08:56:39 AM »

Quote
I used a "Giottos Rocket" dust blower, as used for cleaning cameras ...

http://www.giottos.com/Rocket-air.htm
hmm...bit hight tech for me - I just purse me lips & blow as required  :-*
Logged

Gandy

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 407
Re: Hohner Echo Reeds
« Reply #5 on: September 20, 2010, 09:08:54 AM »

hmm...bit hight tech for me - I just purse me lips & blow as required  :-*
You must have lovely dry breath, I'm always afraid I'll dribble!   Seriously that puffer is good at getting right into corners.  Also I had it anyway.   
Logged
Tony S

HallelujahAl

  • Guest
Re: Hohner Echo Reeds
« Reply #6 on: September 20, 2010, 09:20:44 AM »

Yep I can see what you're saying and in fact I can think immediately of a number of uses for such a blower. I have one that came with my old four track tape recorder - still haven't worked out why??? Am currently restoring a Victorian Anglo Concertina that has more than a century of dust inside it - blowing is not such a good idea though as I'd get a face full of all sorts. Would love a little vacuum cleaner adapter that, perhaps with a flexible hose, would allow me to sweep around the insides of these old instruments.
Logged

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: Hohner Echo Reeds
« Reply #7 on: September 20, 2010, 10:35:40 AM »

i sometimes use  the 'suck' end of an air bed electic pump  ( cab be got for around £5 from camping shops in either 12 or 240v form). it is easy to attach a flexible hose to the stub on the pump & I have a hole in the side of the hose near the end  which can be covered or uncovered by thumb to reduce or increase amount of suck.

george
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

nomad

  • Good talker
  • **
  • Offline Offline
  • Posts: 70
Re: Hohner Echo Reeds
« Reply #8 on: September 20, 2010, 01:13:24 PM »

hi

I carefully gave it a clean out, although it wasn't really dirty or dusty inside, which I thought it would be given its age. There is a No.24 then another couple of numbers stamped on the reed blocks, does that mean it was the 24th one made? Cant find any other markings.
I repadded the finger board so that your fingers don't disappear down the holes, and this has actually helped to reduce the mechanism noise. Gave the whole thing a good clean and it now looks great. Just the inside stuff to attend to once i gather up some money.
Logged

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Hohner Echo Reeds
« Reply #9 on: September 20, 2010, 07:21:31 PM »

Would love a little vacuum cleaner adapter that, perhaps with a flexible hose, would allow me to sweep around the insides of these old instruments.

Al, one you probably didn't encounter during your vocational training....

And contrary to popular belief, on the seventh day the Lord (who was first amongst tinkerers at low cost and not the sort to sit upon his throne for a whole day playing his melodeon and resting) saith "let there be duct tape so that mine servants may join in an airtight manna, the rinsed out tubes from Biros and other small bore piping such as may be found in depleted aerosols of all domestic types into the dirty great holes at the end of vacuum cleaner hoses"

On the eighth day the Lord saith, "if only I had realised the cooling effect on the motor would be greatly impaired I would only have run it in short bursts to avoid cooking the motor" and there was weeping, wailing, gnashing of teeth and the invoice from the menders was exceeding great for this was customer abuse and not supportable under warranty.

Yea verily bretheren the lesson of this is that while omnipotence is fine it is no substitute for hindsight, the only precise science.

Richard (with due apologies to those of delicate sensibilities)
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

HallelujahAl

  • Guest
Re: Hohner Echo Reeds
« Reply #10 on: September 20, 2010, 07:51:43 PM »

Quote
Al, one you probably didn't encounter during your vocational training....
You know - I can't quite figure out how it was that the powers that be missed that one!
LOL  ;D
Logged

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Hohner Echo Reeds
« Reply #11 on: September 20, 2010, 07:55:35 PM »

Quote
Al, one you probably didn't encounter during your vocational training....
You know - I can't quite figure out how it was that the powers that be missed that one!
LOL  ;D

There's quite a lot that is only known to the wielders of the great oily rag Al, you don't build that lot in six days and keep it running without a few chaps in blue with spanners, oil can and a big hammer or two, besides, who do think does the stoking in the establishment down below  >:E

Richard, well practiced with the coal shovel for when the time comes........
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

nomad

  • Good talker
  • **
  • Offline Offline
  • Posts: 70
Re: Hohner Echo Reeds
« Reply #12 on: September 29, 2010, 12:31:20 PM »

Hi

I have been playing about with the box for a couple of weeks now and I don't think the notes are rasping as much as they were and a couple have stoped.  Is this because it is getting used more often that the valves are starten to loosen up and stop vibrating as much. Or is it than i am just becoming accustomed to how the box sounds?
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal