Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Files  (Read 11997 times)

0 Members and 1 Guest are viewing this topic.

Geoffleft

  • Member
  • *
  • Offline Offline
  • Posts: 35
Files
« on: April 29, 2008, 02:07:52 PM »

Some questions to all those brave souls who extend their passions to the insides of the 'Box'.

Who has tried tuning with these new little diamond files that are quite cheap these days? I couldn't resist the temptation when I saw a set of four for Au$8 the other day. This is the price of a four inch flat file of asian manufacture of the kind I find useful for tuning/sharpening reeds.

I'm a bit concerned that the way you would use them wouldn't be the same as the way a steel file is used, and so different techniques may have to be developed. I have been using little diamond points in the dremel for bits of tuning too, I fully realize that this is a loaded topic, but it is my most efficient way of staying in tune.

For flattening reeds Frank Romano (FRM Enterprises) in Montreal sold me some burins (Kind of gouging tools) which with a bit of practice are pretty efficient, and leave the long marks on the reeds we are used to seeing and wondering about.

Any comments freinds?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Files
« Reply #1 on: April 29, 2008, 02:32:01 PM »

I think reeds are too valuable to choose a tuning tool only on the grounds of cost.

For files I've not found better than Swiss files made by Grobert/Vallorbe.  They do a nice triangular file designed for sharpening saws. You can find them at Axminster tools.  And they aren't even expensive.

I have some cheap diamond files, but I don't use them on reeds, mainly because they are too coarse.  Axminster also sell various diamond tools designed for sharpening blades.  The have a nice fine texture, but they tend to be too wide to get good access to the smaller reeds.

Have you tried making your own 'sandpaper files'?  Very simple to make with abrasive paper glued onto a stick.  Very gentle, and with a fine grit you get a smooth finish.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

BruceHenderson

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 262
Re: Files
« Reply #2 on: April 29, 2008, 02:43:23 PM »

(snip) Any comments freinds?

    None other than I admire your spirit of adventure.  In my mature years, I'm beginning to eschew adding other things to the list of things that I dabble at but never had the time to learn to do well so successfully taking such a job on is truly admirable.   How do you measure the pitch of reeds to ascertain how they need to be sharpened or flattened?
Logged
I love one-rows!  Four reeds kick butt!!!!

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Files
« Reply #3 on: April 29, 2008, 08:56:08 PM »

How do you measure the pitch of reeds to ascertain how they need to be sharpened or flattened?
I have a Peterson Strobo-Flip tuner. With this you can work out how many cents (cent=1/100 of a semitone) each note is out by and the rotation of the strobe display indicates if the note is sharp or flat. Offset the note reference value until the strobe rotation stops and read off how many cents +/- the note is.

I've just started looking into reed tuning and I'm about to have my first go at tuning a full instrument in the next few weeks. I might start a thread on the inevitable ups and downs to give you all a laugh.  ::)
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Geoffleft

  • Member
  • *
  • Offline Offline
  • Posts: 35
Re: Files
« Reply #4 on: April 30, 2008, 02:28:46 AM »

Theo. Thanks for the idea of a sandpaper file, it sounds good, with nice fine grit you could do really fine work. Yes I agree, good reeds aren't something you stuff around with! I did my learning on old hohner boxes mostly.

A spirit of adventure??! How many of us learn to swim by being pushed into the water? Quite a few I think.
If you ever have to find a reed rivet, it is a lot easier to turn one up using the head of a two inch nail in the collet chuck of your dremel! Neccesity has always been the mother of invention hasn't it? Just make sure you use your Vernier Calipers.

I would dearly love a Peterson strobe tuner, but how one can afford such things is a perpetual wonder to me. Where to put it is another thing to consider if you aren't lucky enough to have lots of space.

I have always used a Boss TU 100 tuner. I don't think theyr'e available any more, but I might be wrong. It has an easy to read needle gauge, and would obviously be totally inferior,as regards accuracy, but the big advantage to me is that it's mine! It isn't very big,and comes with me when I go to festivals. With it and a bit of help from my ear, I keep pretty happy.

Logged

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Files
« Reply #5 on: April 30, 2008, 12:00:55 PM »

Many people sure can "learn to swim" when pushed in the water, however it's a lot easier when someone can teach you the basics beforehand ;)

For the tuning, these hi-tech devices are surely very useful, but I can imagine how the tuning was done 50+ years ago when those electronic marvels weren't around and the craftspeople used their ears and simple reference tools (tuning forks?) to achieve the beautiful sound we still enjoy today on old recordings! 
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Robin Harrison

  • Good talker
  • **
  • Offline Offline
  • Posts: 94
Re: Files
« Reply #6 on: April 30, 2008, 05:52:33 PM »

I've used these to tune concertinas with great success.......two grades available.
 Lee Valley Tools is a Canadian Company .
      Robin
http://www.leevalley.com/wood/page.aspx?c=1&p=20187&cat=1,42500,42523
Logged

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Files
« Reply #7 on: April 30, 2008, 05:55:46 PM »

I would dearly love a Peterson strobe tuner, but how one can afford such things is a perpetual wonder to me. Where to put it is another thing to consider if you aren't lucky enough to have lots of space.

Obviously you didn't follow the link and take a look. This is a small unit not one of the huge bench mounted jobbies and is a fraction of the price. At around £160 they're not exactly cheap but they do cost less than having one melodeon tuned.  ;)
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

BruceHenderson

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 262
Re: Files
« Reply #8 on: April 30, 2008, 06:51:54 PM »

   A spirit of adventure??! How many of us learn to swim by being pushed into the water? Quite a few I think. 

__.  Yes, I'm an admirer of that sort of thing.  I had a neighbor who decided that if his children needed brain surgery he'd go on the internet and get a recommendation for the right chisel, saw, hammer, etc.  He just jumped right in.  It's kind of like tuning reeds, he'd probably "get the hang of it" after he'd ruined a few.  ;D
Logged
I love one-rows!  Four reeds kick butt!!!!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Files
« Reply #9 on: April 30, 2008, 07:17:56 PM »

Obviously you didn't follow the link and take a look. This is a small unit not one of the huge bench mounted jobbies and is a fraction of the price. At around £160 they're not exactly cheap but they do cost less than having one melodeon tuned.  ;)

Hmm, clearly I'm charging far too  little!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Geoffleft

  • Member
  • *
  • Offline Offline
  • Posts: 35
Re: Files
« Reply #10 on: May 01, 2008, 05:38:27 AM »

Yes I admit I didn't follow the link, Tallship. The Peterson Strobo-flip looks wonderful. And at that price it's a wonder good Accordion Techs aren't extinct.

Money and me have always had a troublesome relationship though, and this is why I started stuffing around with my own accordions. I couldn't afford, quite literally to get my Box tuned by a guy down the road who I discovered was grinding the reed plates of my Boxes as well as the reeds!! I had a feeling this wasn't correct, but I still had to pay for his work.

Time was also an issue, with a playing diary that didn't permit any downtime on my main instrument, this had the effect of ensuring that mistakes were not at the time an option, and so, I didn't make mistakes.

I have been lucky to sit next to a respected tuner, and watch the process that a Master used in tuning by ear, with a few reference tones. I consider that to have been a great honour, and one thing that guy showed me was that reed work was not a black, superstitious art that none but the divinely gifted were granted access to. If you respect the other musicians you play with, assuming you are lucky enough to play with others, never abuse the privilage by playing an out of tune instrument.

But then, I was just wondering about files.......
Logged

C age ing

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 434
  • New fangled melodeon?
Re: Files
« Reply #11 on: May 01, 2008, 07:37:13 AM »

Guys and Gals,
Stay with your boxes and let others tune them. As you know, woodwinds and brass instruments are unable to be produced in tune with themselves, let alone others. They have to be lipped in and playing with a tuner attached is a very sobering experience and hard work. So stay with your melodeons and get them tuned yearly, not every bloody moment you are playing them. ;D
Old Bill.
Logged
My Erika is as old as me. Luckily, it is not as decrepit.

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Files
« Reply #12 on: May 01, 2008, 09:28:50 AM »

But then, I was just wondering about files.......

Sorry about the tread drift, I was just trying to answer a question.

Theo: The box I was thinking of is a three voice and the estimate I got for tuning, re-valving and waxing the reeds back in was 'around £200'. In fairness this might have included a key change from C/C# to C#/D but I've deleted the email and can't check on that.

I don't think technological advances will ever threaten the skilled tuning technician's livelihood, a few people like me might have a dabble on a cheap old box out of interest without any intention of tuning for anyone else or indeed tuning their own best instrument. The old Hohner I have is just about scrap so I can't ruin anything precious or expensive to replace.

Back on topic, I have a set of diamond files but I'm not inclined to use them on reeds as a novice tuner. I liberated a couple of stirring sticks from a coffee shop that are around a quarter of an inch wide, glued them together and stuck very fine wet and dry paper on one side and a slightly coarser grade on the other. It may take me a long time to tune my first reed but I'll find out how much metal comes off to change the pitch by a couple of cents, lots of practice like this will lead to sufficient experience to judge when to use something more aggressive and for how long when making major adjustments like a key change.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Files
« Reply #13 on: May 01, 2008, 11:27:02 AM »

Theo: The box I was thinking of is a three voice and the estimate I got for tuning, re-valving and waxing the reeds back in was 'around £200'. In fairness this might have included a key change from C/C# to C#/D but I've deleted the email and can't check on that.

That's more like it.  I would describe that job as a reed overhaul, a much bigger task than just tuning.

Back on topic, I have a set of diamond files but I'm not inclined to use them on reeds as a novice tuner. I liberated a couple of stirring sticks from a coffee shop that are around a quarter of an inch wide, glued them together and stuck very fine wet and dry paper on one side and a slightly coarser grade on the other. It may take me a long time to tune my first reed but I'll find out how much metal comes off to change the pitch by a couple of cents, lots of practice like this will lead to sufficient experience to judge when to use something more aggressive and for how long when making major adjustments like a key change.

To my mind the big advantage of the abrasive paper tool over a file is that it is much more gentle and predictable.  It is possible for a file (even a good one)  to catch the edge of a reed and remove too much metal, or even bend a very fine reed,  that sort of mishap is almost impossible with a sanding stick. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Geoffleft

  • Member
  • *
  • Offline Offline
  • Posts: 35
Re: Files
« Reply #14 on: May 01, 2008, 01:15:12 PM »

Just thought I'd check.

 No. That favorite file of mine isn't even of asian manufacture at all. It's from a place called Portugal. Now that is a long way away, further even than Switzerland. Good file. Four inch flat. Probably a second cut by the looks of things. Not a Fine, and definitely not a Bastard. I hope you get my drift. It has lasted well too, although I've taken some care to keep it away from the other hard tools. Not Swiss though. Nor German. Nor Australian either, we used to make good files.

Guys, just be really carefull to use the right glue on your sandpaper sticks. The wrong glue could really set you off on the wrong tack. Heh. No, be sensible, don't go using something stupid like Milners. Maybe it'd be worth trying Hyde glue. It has a wonderous reputation.

Logged

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Files
« Reply #15 on: May 01, 2008, 10:36:12 PM »

one thing that guy showed me was that reed work was not a black, superstitious art that none but the divinely gifted were granted access to.

Too simplistic. A good artisan can make a very acceptable workmanlike job to a high degree of skill, consistently well executed and to a highly acceptable standard. I will guarantee that others will come along and lift the game way beyond that to an almost godlike status; they do this with an uncanny understanding of the task at hand, appreciated by many but truly defined by none. If you could explain and define genius then that knowledge would be available to all; all that is who were able to understand.

For that reason there will always be the mediocre, the good and the exceptional and long may it be so; otherwise the pretentious like me will have nothing to aim for and scientists will rule the world.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Waltham

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 198
Re: Files
« Reply #16 on: May 01, 2008, 11:47:03 PM »

I've used these to tune concertinas with great success.......two grades available.
 Lee Valley Tools is a Canadian Company .
      Robin
http://www.leevalley.com/wood/page.aspx?c=1&p=20187&cat=1,42500,42523

Ah, Stick Sanders, I remember him well.  They scoffed when he joined Fairport, y'know.

I've not used it but Dirk's Accordion Tuner program and a microphone is even cheaper than Peter's Son-Strober, and it monitors three reeds at once and keeps track of how your wetness varies with pitch. 

I've thought about tuning my own reeds in the past but never got round to it.  Perhaps being told by people who've never met me that I shouldn't is the impetus I'll need to get started...
Logged

Geoffleft

  • Member
  • *
  • Offline Offline
  • Posts: 35
Re: Files
« Reply #17 on: May 02, 2008, 06:50:58 AM »

Yes, the guy I sat and watched is revered in God like ways in his own community. He would be considered by all but the most brutish as high Folk Royalty. I do accept what you say 'Tallship', and generally I agree.
Definitely there exists a Divine spark, that glows in diverse ways in all of us. We of sensitivity can perceive and celebrate those who are blessed in specific areas, in this case accordion tuning. Some obviously can not.

I don't know what calibre of person, or musician you are. You may be a highly sensitive individual who is well qualified to be a judge of all things pertaining to every aspect of the Button Accordion. You may be a masterful player, a national treasure of long standing and priceless cultural value. Or you may not be.

And so might I be or not be.

However. I do like my accordions to feel just so. And if they don't feel right, and I can't make them speak what I want to say in my music, well then I feel, as the reason these instruments exist at all is so that I can play on them, that I should be able to correct them so that they do perform as I need them to....

And out come my trusty Portugese 4" second cut flat file, my dremel and little diamond point, my flattening burins, a half razor blade very well used and thin, a scalpel, a small screwdriver, masking tape, the old Boss TU100 chromatic tuner, tuning chart and pen. And I sit at my little kitchen table until Sparrows, Blackbirds and Thrushes, Indian Miners, Starlings,Silver Eyes, Wattle birds and Helmeted Honeyeaters start up their racket. And when I'm happy, I go to bed.

One of the nice things about a Forum such as this is that It's great to discover others from diverse places with whom you can share........ um, is'nt it.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Files
« Reply #18 on: May 02, 2008, 08:54:16 AM »

However. I do like my accordions to feel just so. And if they don't feel right, and I can't make them speak what I want to say in my music, well then I feel, as the reason these instruments exist at all is so that I can play on them, that I should be able to correct them so that they do perform as I need them to....

Which is exactly how I got into this type of work, which has now become a full time occupation.  I've enjoyed the challenge of acquiring skills where no textbook, apprenticeship or any other formal training is available.  I've been assisted by many generous people who shared what they knew.  It has also been a satisfying process to search for and find suppliers of some obscure materials and parts, and I have an excuse to visit Italy from time to time which is always a pleasure.  And I'm still learning...

Quote
One of the nice things about a Forum such as this is that It's great to discover others from diverse places with whom you can share........ um, is'nt it.

Indeed it is, and in that spirit could I ask anyone who reads this make sure your profile includes your location, even if its just the name of your country.  pushpullefty I guess from your bigpond email that you are in Australia
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Geoffleft

  • Member
  • *
  • Offline Offline
  • Posts: 35
Re: Files
« Reply #19 on: May 02, 2008, 01:04:10 PM »

Yes Theo. I'm from Melbourne, Australia. A big Urban mess of a place.

And Theo. It is nice to communicate with a  kindred spirit such as yourself..

My road has maybe been a little different than yours, as at every turn I have met with negitivity and challenges. In Australia we have a culture of cutting down the 'tall poppies'. This is especially apparent in 'Folk' circles. Still the process of learning about the accordion is a bit like a Bower bird building its fantastic nest out of all those especially selected bits of junk, all in blue. We get our information where we can and however it comes. As long as we eventually do get it.

And when I met the 'Box' for the first time, I had a feeling that this was my road. You get that feeling with people too don't you.

Thanks for a great forum.
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal