Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Any of you engineering types...  (Read 4153 times)

0 Members and 1 Guest are viewing this topic.

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Any of you engineering types...
« on: October 05, 2010, 11:27:53 PM »

Ok, not strictly melodeons but is there anyone here who'd be able to copy a double truss rod for a guitar or at least know someone who'd be able to?. A very silly man who will remain nameless but whose first name is Jon and surname is Loomes asked me to make him a 720mm scale 8 string guitar for which I need a slightly longer truss rod than is usually available, one avenue of enquiry came to nothing after a while waiting for an answer so the rest of the guitar is being held up waiting for a suitable truss rod.

I'd imagine it would be fairly simple for someone with the knowledge and equipment, just two small brass blocks threaded to accept two threaded rods, one above the other, with an adjustment nut brazed, (I think), on. An example rod to work from can be provided and some small pieces of paper with the Queen's face on them will be delivered on completion.
Logged

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Any of you engineering types...
« Reply #1 on: October 05, 2010, 11:36:34 PM »

go to   frets.com

look around there  for truss rod  types and construction

720  MM         wel now,  that's manly....  if not un man ageable
Logged

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Any of you engineering types...
« Reply #2 on: October 05, 2010, 11:44:57 PM »

I'm very familiar with that site, probably wouldn't have got where I am today without it to be honest.

I don't really have the knowledge or experience of metal working, certainly not to the degree of precision required, or any of the necessary equipment. I could do a single rod but my overwhelming preference for this design is a 2-way double rod, ideally one that fits in the same size channel as the ones I usually use so I don't have to rethink my methods.
Logged

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Any of you engineering types...
« Reply #3 on: October 06, 2010, 12:40:51 AM »

Sounds like a fun project. Plenty of info over at the MIMForum:

http://www.mimf.com/

(You have to sign up for the forum, and it's one of those places where it's really best to read, read, and read some more before asking a question. But there's been so much useful discussion over the years that searching the archives could be enough by itself.)

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Any of you engineering types...
« Reply #4 on: October 06, 2010, 01:06:11 AM »

Again, I'm very familiar with that place, used to post on it a few years ago and I've probably read every thread in the archives. The design was done last year and the body is actually complete, it's just the lack of a truss rod of the correct length that's holding up the completion of the neck. I've got a good idea of what's involved in making a truss rod but I know I definitely don't want to do it myself.

My last resort is getting one made up via LMI but the lead times are apparently very long and it's not really economical with shipping and import costs so I'd be pleased as punch if someone closer to home could knock one up for me.
Logged

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Any of you engineering types...
« Reply #5 on: October 06, 2010, 02:29:37 AM »

Not a big fan of LMI, truth be told. But many people are because their bog standard luthier products are frequently out of stock.  ;D

I'd still try MIMF because there may be someone there who is willing to make such a truss rod, and quickly, too. Although they may prefer the Presidential motif on their paper reward, but that works to your advantage.
« Last Edit: October 06, 2010, 02:31:09 AM by cpsmart »
Logged

pete /acorn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 930
  • .Cast Trilly
    • Acorn Instruments
Re: Any of you engineering types...
« Reply #6 on: October 06, 2010, 07:52:25 AM »

Hi,
Why not try a small engineering firm local to yourself,we have a couple in York who may help if you get stuck.
Pete
Logged
Acorn Instruments are specialist retailers of Castagnari Instruments,and have an extensive stock of new instruments on the shelf for prompt delivery in standard layouts however these can easily be changed to customers special requirements,we have over 600 reeds in stock
 We also have the largest stock in the UK of  pre loved melodons all fully serviced,and with 12 months warranty
UK and international customers catered for
www.acorninstruments.co.uk

Simon

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 449
  • Serenellini Selli C/F and Gold98 G/C
Re: Any of you engineering types...
« Reply #7 on: October 06, 2010, 08:22:54 AM »

I guess you can't just use a bass guitar truss rod?
Logged

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Any of you engineering types...
« Reply #8 on: October 06, 2010, 03:21:32 PM »

Can you post or PM a dimensioned sketch of what you need Andy ?

I don't have too much in the way of long rod stock but we might just be lucky (although I DO have some 3 metre lengths of pre enjoyed M8 studding though - if it is hidden in the body  >:E) and the brass bits and brazed nuts sound fairly straightforward - unless we are into specialist threads territory.

Jon was kind enough to play me 'Oh Joe the boat is going over' down the phone when I was looking for a one row 4 stopper so I'll led a hand if I can  ;)

Richard - who has just received a variety of piano wires with a view to re springing the ancient Hohner's treble end - anyone got a jig or recipe for batch forming these before I try re inventing the wheel ??
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Any of you engineering types...
« Reply #9 on: October 06, 2010, 03:36:44 PM »

Aha!, I shall get right on it Richard...

Thanks for all the other suggestions so far. (:)
Logged

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Any of you engineering types...
« Reply #10 on: October 08, 2010, 11:50:33 PM »

Maybe we also need to start a side thread, regarding this alleged "JL" person to determine exactly why he can't get a good deal on one of his own Binci Oakwoods, yet is indulging in guitar pornography. "GAD".
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Any of you engineering types...
« Reply #11 on: October 09, 2010, 12:20:29 AM »

I had a friend who worked in the local Chocolate factory (before they closed it !) Steve, never touched the stuff out of work.............

Any progress with the sketch Andy ?  I had a look at the threaded rod and while its not pristine, (It had supported the factory compressed air supply so had been exposed to 20 odd years of muck which will clean off), is plated (probably zinc) which has dulled but I can run a wire wheel over it in the lathe, it is available at the same price as I had it for (nowt) If its too thick at M8 (or needs to glisten) you could do worse than have a look in B&Q, they have a variety of sizes in 1 mtr lengths and used to do some sections in 2mtr.

Richard
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Any of you engineering types...
« Reply #12 on: October 09, 2010, 12:48:52 AM »

Maybe we also need to start a side thread, regarding this alleged "JL" person to determine exactly why he can't get a good deal on one of his own Binci Oakwoods, yet is indulging in guitar pornography. "GAD".

Because he can't actually, he cancelled his order but I kidnapped his dog and am threatening to sell it to a Korean restaurant if he doesn't pay up.

Seriously, it's a pretty unique set of circumstances for this one. In the unlikely event of the Jon Loomes Signature Model making it into my regular catalogue, (although one or two melodeon models might, watch this space), it'll cost more than the original... >:E

Richard, bear with me a minute, I'll PM you. I thought I had one to hand to sketch but it turns out I don't...or it's been mislaid in the general chaos that's surrounding me at the moment.
Logged

Jon Loomes

  • Performer, Recording Engineer, Luthier.
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 115
  • Non plaudite. Pecuniam jacite.
    • www.jonloomes.com
Re: Any of you engineering types...
« Reply #13 on: October 10, 2010, 09:23:35 PM »

Mr Loomes regrets to inform his adoring public that being short on the ackers, he has to restrict his extravagent purchases to things he can actually play (or in the case of the ever expanding hurdy gurdy collection, things that nobody else can play either).

Case closed.
 :|glug


Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Any of you engineering types...
« Reply #14 on: October 11, 2010, 12:40:32 PM »

One of JL's best quotes:  "Stuffed to the gunwales with some of the best reeds I've ever heard."
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal