Abpout 15 years ago I ordered a custom made ukulele from a builder in Hawaii
What I ordered
Concert size
plain koa with binding
NO inlays anywhere. no pearl or abalone
No headstock logos or names
The instrument was promised in 4 months
$800
What I got
Soprano
Figured koa with no binding
a mele vine with leaves inlaid in pearl and abalone running up the entire fingerboard
builders name in pearl on the headstock so large it covered the whole thing
I contacted him at 11 months (for the first time)
He said he would ship only after I would send an extra $200 because it took more time and the materials and shipping went up
When I got it.. it was poorly made, total junk, unplayable ( I build ukes myself) hideous, sounded like Sxxx
He would not replace it or take it back
I sold it for $400
Castagnari Mory..
From a German dealer who also sells Saltarelle and a couplke other makes
You have heard this story before
Arrived with no padding in the case, case broken, bass mechanism broken and so badly tuned it was unplaybale
Dealer would not help at all, would not accept responsibuility, Castagnari told me to go pound sand.
$377 later for tuning and my efforts in repairing the bass mechanism and case.. it was right...and I sold it to get out form underneath
it.. I lost about $1100.
Cajun accordeon..
I asked for Maple
NO red anywhere
Black straps NO white..
NO engraving on the end plates
What I got
Walnut with maple end plates
Red flappers, red bellows
Black straps with with trim
Engraving on the end plates in . RED
Add to that misaligned end plate flapper holes, frayed and burred holes
debris inside the box....
misaligned reed blocks covered by endplate material
badly tuned and just on the treble, tempered on the bass
I sold it the following day for a $25 loss
I ordered another one row...
Natural maple
Black Buttons
'Thumb groove
Very very light swing.. maker said 5 cents
Promised in 5 months
What I got
Medium brown
White buttons
No thumb groove
12 cents at the thirsd button push
12 1/2 months
Maker will not take it back... he has and has had all my money
Ordered a bellows from an American source that claimed the HARMONA bellows " were better than Italian in many ways"
The seller suggested 18 folds ( I don't and did not know how many are standard)
I asked for all black
Price was about $40 higher than Italian
What I got
18 folds
Black with red
slightly damaged as if they had been pulled off an accordeon
very thin carboard, thin leather gussets, cheap and cheezy bellows tape, thin metal corners
unlined
the long sides were not straight and bowed in about an 1/8th of an inch.
The bellows were not "square" but trapezoidal
Would not snap back when stretched and released
I compared these to a set of Italian Belllows I had just gotten from Greg Mouton
The Italian bellows were stronger,
Cardboard and leather thicker, bellows tape thicker and put on straight
Thicker metal corners
Sides straight, square
Lined
Beautifully made
Snapped back with force when stretched and released
I contacted the seller and described the condition and that they looked like Chinese made bellows
a dozen unexcusibly nasty and irresponsible and threatening
e mails later.. the seller said that because I "custom" ordered these bellows
he would not take them back.... did I mention they were $40 more than the Italian bellows ?
If I custom ordered a new Mercedes Benz and it was defective, or not as ordred, the buyer could return it for a full refund.
How do I know that...... I am a former factory rep for Merecedes Benz of North America and we did that as a matter
of course and as a stand up honorable company that accepted responsibility.
So what is it with these guys... ?? I don't get it. What happened to customer service, and hoinesty and ethics and taking responsibility.
I make furniture... If I srcewup I eat it and fix it fast and or refund ( 3 times in 20 years.)
Anyone have any ideas here... ?
Is this confined to the instrument business, specifically Accordeons
And we have all heard the Castagnari consistency of inconsistency.... 8- 24 months...
and It might have the right basses to go with the trebles....