Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Bruno Priez "Kordéon"  (Read 6215 times)

0 Members and 1 Guest are viewing this topic.

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Bruno Priez "Kordéon"
« on: October 24, 2010, 08:28:43 PM »

Priez has done something really interesting:
http://www.accordeon.org/2009/07/28/montage-d’un-kordeon/
Skip ahead in the video past th 5 min point to see the "Kordéon."
Skip to 7:35 to see the back of the instrument.
Skip past 10:00 to see him play some tunes on it.
I'm really interested in the action on this thing -- looks a bit like concertina action.
« Last Edit: October 24, 2010, 08:31:15 PM by Andy in Vermont »
Logged

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Bruno Priez "Kordéon"
« Reply #1 on: October 24, 2010, 10:42:07 PM »

Very cool..
the infamous and elusive Priez....

Mechanism is interesting.

Notice the fingers on his left hand, the mark of a woodworker...
« Last Edit: October 24, 2010, 11:01:10 PM by melodeon »
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Bruno Priez "Kordéon"
« Reply #2 on: October 24, 2010, 11:30:14 PM »

Fascinating. The mechanism I agree is interesting, I wonder whether for small accordions a simple lever might be better than the double linkage used on larger boxes. As for the pads and cups rather than pallets, it would be interesting to see how easy they would be to adjust, I'm guessing not as easy as waxed in pallets.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Bruno Priez "Kordéon"
« Reply #3 on: October 25, 2010, 07:38:18 PM »

Thanks for posting this Andy, just got round to watching.

For those who don't understand French or who skipped the first few minutes I gleaned the following (with difficulty because of the audio quality and the fact that the clip kept stopping and starting): the project was to make a "sustainable development" accordion that could be built anywhere in the world - Madagascar in particular - with materials available locally.

BP mentioned a Surform scraper and file tool (rape, lime) for working the horn as well as the plane, chisel and hand saw mentioned by Andy in another thread.

He chose horn for the buttons, pallets and linkages, works very well, doesn't move with changes in temperature, etc. No screws.

Hide, horn and fish-skin glue. Gasket of leather. Bellows corners could be done without.

Springs: piano wire in this model, but because people there might not have piano wire to use, in the next model he plans on using bamboo.

Shaft of axle: bicycle spoke

There are leaks from the round pallets, which he will rework.

The prototype shown is single voice, but he has made a second prototype for Madagascar based on a 2-v 1913 Hohner, sold in Madagascar in the 1920s and 1930s, probably before they were branded Hohner, of which a few remain in circulation and are still being played there.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Bruno Priez "Kordéon"
« Reply #4 on: October 25, 2010, 08:12:30 PM »

Emmanuel Pariselle uses bicycle spokes in his Stowmarket melodeons, I know I have one :)

Matthew B

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 894
Re: Bruno Priez "Kordéon"
« Reply #5 on: October 26, 2010, 03:30:11 PM »

Andy,
Thanks for posting this.  It was absolutely fascinating.  Despite my very sketchy French I was able to follow the general drift of the thing.  It makes a lot of sense.  A simple squeeze-box is not that much more complex than a whole lot of other things that people build and maintain with very limited resources, far from the developed world: bicycles, watches and clocks, simple engines, sailboats, and so on.  I'd love to see an "open source" melodeon design that could be built in a basement by a hobbyist anywhere in the world.  I know a few people here have built their own boxes with varying degrees of help and direction, but skill levels and quality are, I suspect, somewhat varied.  A professionally designed "hobby-box" of the type shown in Priez's video would be a great addition.  I'm currently setting up to build a Frosty (small sailing dinghy) with one of my daughters to support her growing interest in sailing.  The plans are easily obtained for a very reasonable cost, and the techniques and materials are all within the grasp and budget of a couple of novice boat-builders.  I'd love to be able to do the same thing with a melodeon.  Does Priez give details of bellows manufacture, reeds, and tuning?  I imagine they would pose the greatest challenges to a novice. 
Logged
Charter Member Presumpscot and Fore River Accordion Club

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Bruno Priez "Kordéon"
« Reply #6 on: October 26, 2010, 10:19:07 PM »

Fascinating stuff.  Pretty ingenious way of attaching the faceplate frames to the bellows frame. 

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: Bruno Priez "Kordéon"
« Reply #7 on: October 27, 2010, 04:15:21 PM »

Steve,
Thank you for translating.  I understood most of it, but wasn't confident enough to post my translation --- I understand French only "by the skin of my teeth" and missed the part about the sur-form rasp among other things!
I didn't catch the part about the pallets and linkages being horn.  Amazing.
I also don't understand the part about the left (bass) side. Can you fill us in?
-Andy

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: Bruno Priez "Kordéon"
« Reply #8 on: October 27, 2010, 05:05:14 PM »

Here's more:
http://mondomix.com/blogs/accordeon.php/2010/01/03/title-38
Same video (I believe) but more on accordions in Madagascar.
Also, Priez's contact info:
http://metiersdart.cahm.net/fr/artisans/priez-bruno.html

OwenG

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 297
Re: Bruno Priez "Kordéon"
« Reply #9 on: October 28, 2010, 05:05:23 PM »

And here's some Madagascan box playing:

http://www.youtube.com/watch?v=47SONWL0p0U (Note the football inspired decorations)

http://www.youtube.com/watch?v=A9gf2UZeeno

http://www.youtube.com/watch?v=zsIMQLa8Hyo

http://www.youtube.com/watch?v=vu1bw3-qaqY (same chap as the first clip)

From these you can see why the Kordéon could be needed.
Logged

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Bruno Priez "Kordéon"
« Reply #10 on: October 31, 2010, 08:22:30 PM »

Quote from: Andy in Vermont on 2010-10-27, 11:15:21
I also don't understand the part about the left (bass) side. Can you fill us in?

Watching again now, today there are no stops and starts, much easier to follow the words. Skimming through I didn't hear anything specific about the basses, unless you can point me to a place in the clip where he seems to discuss them.

At about 2:40 he says, just after the "wipe" effect between frames, "one thing was bothering me... on the right hand, you have mechanisms [inaudible], and the on the left, you have the basses. There are metal shafts... we'll swipe horns from zébus, and we'll swipe spokes from bicycles... it's completely feasible."

Later on he explains that the horn needs to be flattened, and this can be done by soaking it in boiling oil - just the way your nails soften in the shower!

Edit: PS I'd like to see how the reeds are mounted. At the very beginning, BP says that "they" can start with a thickish piece of wood. On one side they can hollow out the chambers ("alvéoles") on which the reeds are mounted, and on the other they can drill the holes through which the air, and hence the sound, comes out. Sounds almost as though the fondo and the reed chambers are fashioned out of single piece.

Edited in error: no changes made!
« Last Edit: June 29, 2017, 04:38:49 PM by Stiamh »
Logged

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Bruno Priez "Kordéon"
« Reply #11 on: October 31, 2010, 10:08:04 PM »

Fish glue, one of the oldest known and usually made from northern cod or Halibut

I get mine from Canada

Been using it for 10 plus years.  I use it quite a bit on musical instruments and for  some faux techniques

I really like Priez's use of "materials at hand"
Part of the true definition of folk art.

I believe that Priez creation here is indeed art.

Thansksfor the thread Andy
 and thanks Steve for the translations,  my comprehension was about 20%

Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Bruno Priez "Kordéon"
« Reply #12 on: November 02, 2010, 12:08:21 AM »

I believe that Priez creation here is indeed art.

Agreed (:)
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

EeeJay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 642
  • Old Grey Paolo
Re: Bruno Priez "Kordéon"
« Reply #13 on: November 06, 2010, 08:10:45 PM »

Logged

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: Bruno Priez "Kordéon"
« Reply #14 on: June 28, 2017, 11:51:03 PM »

Hi guys many thanks ,some interesting stuff cant get the http://www.accordeon.org/2009/07/28/montage-d’un-kordeon/ to play but its probely my incompetence with computers... horn now that's cool and the bronze bushings lovely job

I agree the bearings are overkill ,but i fitted some in resin for a friends project and it was easier than inserting nylon shims
as they were the perfect width and i ran out of ideas lol
Love this beautiful but "cobbled ?" that sounds wrong but you know what i mean,no distraction no frippery chunky and functional completely opposite from the mass production nowadays
food for thought     
 
Logged

Andrius

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 180
Re: Bruno Priez "Kordéon"
« Reply #15 on: June 29, 2017, 08:25:10 AM »

Can't see nothing too :-(
May be there is the same video
Logged
Koch Bb/Eb 12b 3v : Koch A/D 8b 2v : Koch C/F 12b 2v : Hohner Erica C/F 8b 2v : Hohner Erika C/F 2.4 row 8b 2v : Hohner early pre-Corona F/Bb/Eb 12b 2v: Hohner Liliput 2.4 row Bb/Eb 8b 2v : Hohner Club III BS C/F 2.7 row 8b 3v : Galotta D/G 8b 2v : Meinel & Herold G/C/F 16b 2v : Unkn G/C 8b 2v : Petersburg accordion F/Bb/Eb 16b 3v: Petersburg accordion G/C/F 16b 2v : Bandoneon Alfred Arnold 128 tone 2v : Bandoneon Wilhelm König 144 tone 2 v

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Bruno Priez "Kordéon"
« Reply #16 on: June 29, 2017, 03:29:30 PM »

Can't see nothing too :-(
May be there is the same video

I'm getting an error message - it seems it can't be found on accordeon.org now...  :(

But that's it on YouTube: TULLE LE KORDEON, UN ACCORDEON A DEVELOPPEMENT DURABLE

There's also: Ecole Accordéon Montpellier - Bruno Priez

And a short clip of him playing it here: Bruno Priez

Corrected

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Bruno Priez "Kordéon"
« Reply #17 on: June 29, 2017, 04:36:45 PM »

The one you found is a different one about it: TULLE LE KORDEON, UN ACCORDEON A DEVELOPPEMENT DURABLE

Not different, I think. It's the same, or substantially the same, clip as the one referred to by Andy in Vermont in the first post. My comments on the original clip match, as evidenced by the following quote, down to the 2:40 timing and the wipe effect...

Quote
At about 2:40 he says, just after the "wipe" effect between frames, "one thing was bothering me... on the right hand, you have mechanisms [inaudible], and the on the left, you have the basses. There are metal shafts... we'll swipe horns from zébus, and we'll swipe spokes from bicycles... it's completely feasible."

Later on he explains that the horn needs to be flattened, and this can be done by soaking it in boiling oil - just the way your nails soften in the shower!

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Bruno Priez "Kordéon"
« Reply #18 on: June 29, 2017, 06:12:52 PM »

The one you found is a different one about it: TULLE LE KORDEON, UN ACCORDEON A DEVELOPPEMENT DURABLE
Not different, I think. It's the same, or substantially the same, clip as the one referred to by Andy in Vermont in the first post. My comments on the original clip match, as evidenced by the following quote, down to the 2:40 timing and the wipe effect...

I'm getting confused about links from mel.net that I've clicked on recently - must be losing it...  :(

It wasn't the OP's link in this thread that I followed, but this one (which seems to have revived this old thread):

... I have had a look at various lever systems
thought this was a simple but interesting

https://www.youtube.com/watch?v=vRnoXLBwMUQ

I'll go back and correct myself.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal