Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3 4 5 6 7 8   Go Down

Author Topic: Refurbishing an old Hohner  (Read 64980 times)

0 Members and 1 Guest are viewing this topic.

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Refurbishing an old Hohner
« Reply #20 on: May 31, 2008, 10:15:23 AM »

The question now is what next? My instinct is to replace the pallet leather/felt facings as the next step but there are so many things to do that I'm spoilt for choice.

The celluloid is marked, scuffed, loose in places and has a few bits missing, did I read somewhere that it's possible to strip it off and stain/polish the wooden casework. Has anyone actually done this?

The treble grille is shot, the finish has gone and the flimsy metal is distorted. I'm considering making a completely new fret-worked wooden cover to replace the whole thing but did wonder if there is a source for replacement grilles, I've seen a new one for an Erica on ebay but nothing for the larger models.

So back to the pallets, if I do this job next what should I do about the rather odd lump of leather under the bass end pallets? It would be difficult to remove or replace it without taking the whole bass action out which is something I don't particularly relish.



Any tips about getting the pallets off the levers without doing any damage would be greatly appreciated.  :)
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Refurbishing an old Hohner
« Reply #21 on: May 31, 2008, 07:50:56 PM »

I've just realised that once I have the pallets off I don't know which is the most suitable glue to use when fitting the new felt/leather sandwich. I'm not sure if pva would soak into the felt and harden it, would contact adhesive (Evostick) be better?
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Refurbishing an old Hohner
« Reply #22 on: May 31, 2008, 08:31:05 PM »

I use a latex glue given to me by a concertina maker. Copydex may be similar, they sell it in Woolies.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Refurbishing an old Hohner
« Reply #23 on: May 31, 2008, 09:56:40 PM »

Two good glues are Bostik Solvent Free and Hi Tack All Purpose (may be latex) both  from Hobbycraft.
I doubt that the thick leather is original but, if it is working, why not leave it alone? If you do have to remove the bass mechanism it is not difficult, if you unhook the springs and detach the the rods first (gives the opportunity to refelt the buttons at the same time)
Unless pallets have been refixed they should be ready to fall off, try raising the lever and gently pushing one end of the wood.
I have a tidy grille off a "Viktoria " that might modify to fit one like yours. I will find it and compare. If it is compatible I will mail you and speak about PA block.
Regards, Bruce
Logged

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Refurbishing an old Hohner
« Reply #24 on: May 31, 2008, 10:58:46 PM »

I use a latex glue given to me by a concertina maker. Copydex may be similar, they sell it in Woolies.
I have Copydex in my toolbox but didn't know if a latex based adhesive was up to the job. Good thing is it's easy to remove and start again if it fails.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Refurbishing an old Hohner
« Reply #25 on: May 31, 2008, 11:06:16 PM »

I have a tidy grille off a "Viktoria " that might modify to fit one like yours. I will find it and compare. If it is compatible I will mail you and speak about PA block.
Regards, Bruce
You're welcome to the reed block anyway Bruce, the offer wasn't conditional but t'would be nice if you have a grille to make the old girl look smart again.  :)
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Refurbishing an old Hohner
« Reply #26 on: May 31, 2008, 11:55:36 PM »

The glue doesn't need to be particularly strong as the pallets are under pressure from the springs most of the time. There is no sideways movement so shear force is not an issue.
Flexibility is the main requirement. Bit like life I suppose.....................

As Bruce says, the pallets should come off with a gentle tug. Lightly sand the old glue off.
Glue leather and felt together in a sheet big enough to cover all pallets then lay the pallets one by one on the felt (PVA glue is OK for this bit but almost anything will do). Don't forget to glue the felt to the shiny side of the leather.
When the glue has set cut around the pallets with a sharp knife.
Mount the keyboard action back on the box and position the pallets in place.
Theo's tip of glueing the pallets to the steel levers with a hot glue gun works a treat. The glue remains slightly flexible so the pallets always land flat.

I've just re-padded a Double Ray. Someone had very kindly used Araldite to stick pallets to levers. Impossible to remove so I had to re-pad with the pallets still on the levers. Not good!
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Refurbishing an old Hohner
« Reply #27 on: June 01, 2008, 10:20:45 AM »

I've just re-padded a Double Ray. Someone had very kindly used Araldite to stick pallets to levers. Impossible to remove so I had to re-pad with the pallets still on the levers. Not good!

Heating the rods with a soldering iron will soften many glues.  I've not tried it with araldite though.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Waltham

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 198
Re: Refurbishing an old Hohner
« Reply #28 on: June 01, 2008, 10:39:04 AM »

Heat won't soften Araldite once it's cured, I'm afraid. 

When I was a student I had the handlebars stolen off my bike, so when I replaced them I filled up the allen-key hole with araldite to stop it happening again.  I mentioned it to a friend saying it was worth not being able to adjust it for the security.  He was a Chemistry postgrad and said "don't worry, there are ways and means, let me know if you ever need to get it out.".  But I never did.
Logged

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Refurbishing an old Hohner
« Reply #29 on: June 01, 2008, 06:07:58 PM »

Pallets out, cleaned up and stuck to new pad material.  ;D






Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Refurbishing an old Hohner
« Reply #30 on: June 01, 2008, 07:41:33 PM »

All the pallets have been refitted but only the bass end has been glued up. I have an air leak at the treble end so I'm leaving it overnight to see if the pads bed in under spring pressure, if that doesn't work a little tweaking will be in order.

Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Refurbishing an old Hohner
« Reply #31 on: June 01, 2008, 07:45:27 PM »

I shall have to read this thread more closely as I have just bought THIS

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Refurbishing an old Hohner
« Reply #32 on: June 01, 2008, 07:56:31 PM »

Nice box Lester, I was watching it myself but I'm being good at the moment and not buying anything else. If you need any bits you should contact the ever helpful Theo, fast service and excellent prices coupled with deep knowledge and sage advice.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Waltham

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 198
Re: Refurbishing an old Hohner
« Reply #33 on: June 01, 2008, 08:07:13 PM »

Oh bother, I was watching that one, and another finishing at the same time, but wrestling a small boy into his pyjamas kept me away from the computer until it was too late.  Ah well, glad to see it's gone to a good home.

On the subject of pallets, I've found it useful to cut a short strip of paper, catch it between the pallet and the board and then pull it out.  Doing this at each end (or each corner) of the pallet and seeing where the resistance is least indicates the part of the pallet that isn't making a good seal.
Logged

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Refurbishing an old Hohner
« Reply #34 on: June 04, 2008, 07:42:33 PM »

My patience has been rewarded. I was a little alarmed at the number of air leaks from the treble pallets, especially as the bass pallets sealed straight away. I decided to take a break from the repairs for a day or two after which the new pads had bedded in all on their own so I glued the pallets in last night.

I say I took a break but I did take the opportunity to clean and polish the celluloid with a specialist plastics polish after taking a hot air gun to the warped bits and smoothing them back into place. There's a small piece missing at the side of the front grille but there's not much I can do about that unless I can lay my hands on a fragment of matching material to graft in.



Speaking of the treble grille, I got my panel bashing tools out and reblocked it to something resembling the original shape then cleaned it up. It looks much better than it did but the shiny coating has mostly worn away and I'm just wondering if I should mask off the end cheeks and spray it matt black (silver spray paint looks so naff!). On the other hand I could simply leave it as is, any thoughts?



I intend to remove the treble keyboard, clean it up, put a thumb groove down the edge and repaint it black. This will also give me the opportunity to renew the felt under the levers and limit the key travel a bit more. What I haven't yet decided is whether I'll do that next or finally bite the bullet and get cracking with the tuning.  :o 
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Bill the Farmer

  • Not quite so
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 497
  • Hohner Club, Liliput...
    • Bill Farmer
Re: Refurbishing an old Hohner
« Reply #35 on: June 05, 2008, 11:28:38 AM »

Quote
Speaking of the treble grille, I got my panel bashing tools out and reblocked it to something resembling the original shape then cleaned it up. It looks much better than it did but the shiny coating has mostly worn away and I'm just wondering if I should mask off the end cheeks and spray it matt black (silver spray paint looks so naff!). On the other hand I could simply leave it as is, any thoughts?
It used to be possible at one time to get things like that re chromium plated. Whether there are still small firms that can do that sort of thing I don't know.
Logged
Bill of Old Radipole Village

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Refurbishing an old Hohner
« Reply #36 on: June 05, 2008, 11:59:02 AM »

I have sprayed grilles matt black and they do look good.
I once sprayed a Pokerwork silver with a matt black grille. Sexy!!
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Refurbishing an old Hohner
« Reply #37 on: June 05, 2008, 02:51:38 PM »

And a bit of metal polish on the original grill might just do the trick.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Refurbishing an old Hohner
« Reply #38 on: June 05, 2008, 06:33:55 PM »

It used to be possible at one time to get things like that re chromium plated. Whether there are still small firms that can do that sort of thing I don't know.
It would be tricky getting the grille off the ends, it's nailed onto the edge of the wooden cheeks and then the lot is enveloped with celluloid. Even if I could get it off the cost of one off re-plating would be more than I could justify refurbishing an instrument of this quality. I've not investigated chrome plating but there are certainly people in Sheffield who would do it in EPNS.

I have sprayed grilles matt black and they do look good.
I once sprayed a Pokerwork silver with a matt black grille. Sexy!!
It's quite easy to get a decent finish with spray cans of matt black. Gloss finishes are a different story without proper spray equipment and suitable skills and I have neither. It's a pity you didn't take any pics of the pokerwork Rees.


And a bit of metal polish on the original grill might just do the trick.
Oh I did that and got odd silvery bits and large areas of the brass like base metal showing through the rest, not pretty.

I removed the treble fingerboard today so that's the next job. There were two strips of quite thick felt under the levers but this is now slotted where the levers have cut through it over the years, oh for the days when I worked in a bakery and had access to woven felt belting - soft but springy and as tough as old boots. I'm now pondering what to use as a replacement. I'll be needing a few more bits shortly anyway Theo (shoulder strap brackets, bellows straps etc), do you have a suitable material to go under levers? I'll also be looking for a bass strap adjuster kit from somewhere ...
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Refurbishing an old Hohner
« Reply #39 on: June 06, 2008, 10:32:48 PM »

I'll be needing a few more bits shortly anyway Theo (shoulder strap brackets, bellows straps etc), do you have a suitable material to go under levers? I'll also be looking for a bass strap adjuster kit from somewhere ...

All available!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: 1 [2] 3 4 5 6 7 8   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal