Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 3 [4] 5 6 7 8   Go Down

Author Topic: Refurbishing an old Hohner  (Read 65024 times)

0 Members and 1 Guest are viewing this topic.

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Refurbishing an old Hohner
« Reply #60 on: July 12, 2008, 07:47:05 PM »

Rain stopped play.  >:( With just two reeds left to complete the bass end tuning I had to pack up and beat a hasty retreat indoors. So far everything is going pretty well although this part has been very long winded, firstly due to my lack of experience, secondly because of my broad streak of caution and determination not to make a complete mess of it, but mostly because of the drastic changes that have to be made on the bass end. The treble end has many more reeds but that's a straightforward case of every reed tuned a semitone lower.

Because this box isn't particularly valuable in itself or precious to me I've tried an experiment. :o I seem to remember reading somewhere that although weighting the tip of a reed to lower its pitch is a straightforward and common practice, it's not possible to weight (stiffen) the belly to raise the pitch. Well I've been and gone and done it and it worked!; raising the pitch of a reed from G3 to C4 seemed to me to be too much to take off the tip without ruining the reed so I beefed up the belly with a line of solder, job done. Time will tell if I've done something with a very short working life but it's entirely reversible and I'm all for learning from your own mistakes. I didn't have a suitable spare reed plate lying around which I could substitute and I was convinced that the reed would be either be ruined by the removal of so much metal from the tip or would have a thin, weak sound and probably suffer from poor response into the bargain.

I'm not a vain person so if the experiment fails in use I'll tell you all about it so you can have a good laugh and join in the chorus of 'I told you so'.  ;D

Retuning the anglo concertina went well and quite quickly, brushing up tuning is much easier than making drastic changes!

Pete.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Refurbishing an old Hohner
« Reply #61 on: August 15, 2008, 06:35:55 PM »

Week after week I've been prevented from continuing this project for one reason or another (mostly weather - must find somewhere to set up a permanent workshop), but now I've finally finished the bass end tuning. New valves will go on tomorrow and then there's the tricky matter of waxing the smaller plates back onto the block. Try as I might I could find no way to refit the sixteen smaller plates using screws, or even enough room to nail them back on gasket material.

Given the thin walls of the reed block I'm not particularly looking forward to the apparently delicate task of applying sufficient wax to the edge of a piece of wood that looks less than 3mm wide to both hold and seal the edges of two reed plates while not using enough for it to run off into the chamber and foul the reed on the other side of the plate. I also have to work fast enough to carefully fit two plates in place before the applied wax starts to set. This is the last hurdle for the bass side though and I'm hoping the treble end proves to be a little less fraught!
« Last Edit: August 16, 2008, 08:08:22 AM by tallship »
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Refurbishing an old Hohner
« Reply #62 on: August 16, 2008, 12:02:26 PM »

Valves all done, no excuse now to delay waxing them in!
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Refurbishing an old Hohner
« Reply #63 on: August 16, 2008, 03:03:13 PM »

I used a single egg poacher as a double pan to melt the wax and made a waxing spoon rest from a wire coat-hanger ...


The result wasn't the tidiest waxing you'll ever see but it worked.  ;D
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Refurbishing an old Hohner
« Reply #64 on: August 18, 2008, 08:00:27 PM »

Of course when I put the melodeon back together I'd made my traditional error and forgotten to reverse two of the plates, the resultant chords were unpleasant to say the least. So in addition to learning how to wax reeds in I've now been able to take two plates off, clean them up and wax them back in without too much trouble.

That said the wax had set to a solid but very sticky gloop, not at all like the hard crumbly stuff that was on there originally. I'm now intrigued as to how accordion reed wax is made up, might be worth another thread to see if we can entice a few people to give up their secret recipes and explain how the individual ingredients affect the finished wax.

As predicted by the knowledgeable members of the forum, the pitch of the reeds has altered significantly now that they're back in the instrument with new valves. This will mean fine tuning them in situ, so I just placed an order with Hohner for some of their specialist tools. Not cheap I can tell you.  >:(
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

sCANdanADIAN

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 181
Re: Refurbishing an old Hohner
« Reply #65 on: August 19, 2008, 12:39:38 AM »

Thank you Tallship for documenting all this work that you've done.It's a tremendous resource to have at hand for the day when I'll have to overhaul my Hohners(that day has come and gone a few decades ago for some of them).

Chris
Logged

finnhorse

  • Guest
Re: Refurbishing an old Hohner
« Reply #66 on: August 19, 2008, 10:27:38 AM »

Quote
Thank you Tallship for documenting all this work that you've done.It's a tremendous resource to have at hand for the day when I'll have to overhaul my Hohners(that day has come and gone a few decades ago for some of them).

Chris

I was just going to say, this has been a very informative thread, and I've been interested in following the progress of your project, with practical (humorous!) commentary also.  I don't see anything else on the net quite like it, save for a few PA blogs found only after an hour's worth of blind link-following and left hand turns..  Watching it blossom to 5 pages, I think "Refurbishing an old Hohner" is turning into quite an "epic" thread.  Perhaps you might want to rename it "Lord of the Reeds.."  ?  :D

...coat! 

(But really, thank you for the document.)
Logged

Bill the Farmer

  • Not quite so
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 497
  • Hohner Club, Liliput...
    • Bill Farmer
Re: Refurbishing an old Hohner
« Reply #67 on: August 19, 2008, 11:30:39 AM »

That said the wax had set to a solid but very sticky gloop, not at all like the hard crumbly stuff that was on there originally. I'm now intrigued as to how accordion reed wax is made up, might be worth another thread to see if we can entice a few people to give up their secret recipes and explain how the individual ingredients affect the finished wax.
There have been various threads in the past on recipes for reed wax, probably on the old forum, because I couldn't find them on here. The one I remember was 50% beeswax, 50% rosin, and 5% olive oil. ??? I think that was Theo.
Logged
Bill of Old Radipole Village

Waltham

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 198
Re: Refurbishing an old Hohner
« Reply #68 on: August 19, 2008, 01:08:18 PM »

The one I remember was 50% beeswax, 50% rosin, and 5% olive oil.
Obviously, you'll need a bigger pot (as Clay Jones used to say).

Tallship I'm very impressed.  And I didn't know Hohner sold tools to civilians, do they have an online catalogue I don't know about?
Logged

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Refurbishing an old Hohner
« Reply #69 on: August 19, 2008, 06:29:36 PM »

I'll reply in full later but I've attached the Hohner spare parts list for your perusal - if the file isn't too big that is!
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Refurbishing an old Hohner
« Reply #70 on: August 19, 2008, 08:10:12 PM »

Quote
Thank you Tallship for documenting all this work that you've done.It's a tremendous resource to have at hand for the day when I'll have to overhaul my Hohners(that day has come and gone a few decades ago for some of them).

Chris
Hello Chris, if you're a practical person overhauling your Hohners will be very straightforward until you reach the reed work which is trickier, but care and patience will be rewarded. I wouldn't advise anyone to do a complete key change as a first project as it makes the task seem endless. When the time comes I'm sure you'll find the forum members as helpful and supportive as I have.

Quote
I was just going to say, this has been a very informative thread, and I've been interested in following the progress of your project, with practical (humorous!) commentary also.  I don't see anything else on the net quite like it, save for a few PA blogs found only after an hour's worth of blind link-following and left hand turns..  Watching it blossom to 5 pages, I think "Refurbishing an old Hohner" is turning into quite an "epic" thread.  Perhaps you might want to rename it "Lord of the Reeds.."  ?   :D

Hello finnhorse, If the ups and downs I've had have proved both informative and occasionally amusing then I'm very pleased indeed, Thank you.  ;D As to 'Lord of the Reeds', this is only my chapter, hopefully there will be more to come from others; then we'll have created  'The Melodeon Maintenance Manual' without realising it.  ;)

Quote
There have been various threads in the past on recipes for reed wax, probably on the old forum, because I couldn't find them on here. The one I remember was 50% beeswax, 50% rosin, and 5% olive oil.  ??? I think that was Theo.

Hello Bill, I'd only found one reference to the composition of reed wax and that was pretty similar except that the olive oil was substituted with 'add linseed oil to taste' which gave no real indication about quantity. I presume that the beeswax is mainly the carrier, the pine rosin gives it grip and the oil prevents it from drying out and crumbling

Quote
Obviously, you'll need a bigger pot (as Clay Jones used to say).

Tallship I'm very impressed.  And I didn't know Hohner sold tools to civilians, do they have an online catalogue I don't know about?

Hello Waltham, I doubt I'll ever get around to making my own wax, I enjoy doing jobs like this and learning all of the ins and outs so that I thoroughly understand what I'm doing and why. I may pick up other boxes to add to the collection and if I can buy them cheap and fettle them myself that's all to the good but I have no ambitions to be a 'proper' repairer/restorer.

Hohner do sell spare parts and tools but they don't exactly make it easy. There is no online shop or catalogue. On Theo's advice I emailed them with an enquiry and received two .pdf catalogues attached to the reply, one for accordions and the other covering the rest of their range. To order, go to the website and click on the 'Service' tab, there you will find contact details for you to email your enquiry about servicing or spare parts. I've now email a short list of tools I require and requested information about postage costs, tax payable and method of payment. Two days later and I haven't yet had a reply, when I do I'll post the information here.

Thanks to all for replying, it's much appreciated.  :) I'm attaching the other catalogue I received in case it's of interest to anyone.

Pete.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Bill Young

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1151
  • Paolo Soprani BCC#
Re: Refurbishing an old Hohner
« Reply #71 on: August 19, 2008, 10:21:22 PM »

People interested in doing work on reeds may be interested to know that reed files, scrapers, test bellows, tuners, reed wax, are available from Charlie Watkins, Biggin Hill, London. His website is http://www.wemwatkins.co.uk/ . Click on the "Accordion Today" link (his on-line .pdf magazine), and go to page 20 for tools.
Logged

Waltham

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 198
Re: Refurbishing an old Hohner
« Reply #72 on: August 19, 2008, 10:57:16 PM »

Some are also available from this site

http://freenet-homepage.de/pigini/PIGINI/index.htm
Logged

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Refurbishing an old Hohner
« Reply #73 on: August 20, 2008, 11:31:31 PM »

Regards ordering Hohner tools and spares.
Surprisingly there seems no mention in the links of Sutherland Trading Co. Bedwas, CF83 8QX
They are still virtually Hohner UK and, so long as time is not of the essence,  their Steve Proctor will order anything from Germany along with his stock orders.
Logged

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Refurbishing an old Hohner
« Reply #74 on: August 23, 2008, 05:43:08 PM »

I've still heard nothing from Hohner so I contacted Steve Procter at Sutherland and the tools are now ordered. I've now stripped the reeds off two of the treble blocks ready to begin tuning the B row. I checked the existing layout and found that the first row was tuned even, the second 25 cents sharp (!!) and the row on the middle block almost 10 cents flat, no wonder the thing sounds wet to the point of being discordant.

The flat reeds for both rows being on the centre block is handy in case I want to try it as a two voice, I would have rearranged it like this anyway. In the absence of a proper reference guide for the tremolo I think I'll try 10 cents sharp and four cents flat unless anyone has a better suggestion. I want to achieve something more pronounced than 'swing' but well short of 'musette'. 
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Refurbishing an old Hohner
« Reply #75 on: August 26, 2008, 09:38:11 PM »

I'm off on my hols again in the morning for a week and a half. I've spent so much time trying to find out what constitutes 'swing' tuning that I haven't yet started on the treble reeds. I found one site selling a box tuned to A=440 (+3), I assume this is a two voice with the sharp reeds tuned up 3 Hz. That didn't tell me a lot until I found this useful on-line tool which means an offset of 3Hz is equal to 11.76 cents.

I'll ponder on this while I'm away and decide on a starting point for my tremolo tuning adventure when I get back.

Pete.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Refurbishing an old Hohner
« Reply #76 on: September 05, 2008, 07:46:47 PM »

Well I'm back and hoping to start tuning the treble end this weekend but need to ask a question of the experienced tuners here.

When tuning the the bass end reeds I used a section of old reed block on the tuning rig for the largest plates but then tuned the smaller plates straight over the slot in the table. The largest reeds stayed pretty much as I tuned them but when waxed back in the smaller plates are noticeable flat. Is it common practice to use lumps of reedblock in a variety of sizes to match the plates when tuning or alternatively tune the reeds a couple of cents sharp to minimise fine tuning?

I do intend to chop up a few lumps of reedblock at some stage to enable me to sound 2/3 reeds together to check chords and tremolo; do I need to do this sooner rather than later? I did find it difficult to sound reed plates flat over the slot because the rivet tops make sealing the plate properly rather problematical. Perhaps I should spend more time 'jigging up' before proceeding, any thoughts?

Pete.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Refurbishing an old Hohner
« Reply #77 on: September 05, 2008, 08:27:14 PM »

New reeds are usually supplied about 10 cents sharp.

Whatever method you use for the first tuning, you will still have to do a final tuning after waxing the plates in place.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Refurbishing an old Hohner
« Reply #78 on: October 02, 2008, 06:55:55 PM »

Delays, delays, but I made a significant discovery today.  I checked the first three reed plates laid flat over the slot on the tuning table and all were significantly sharp. So I finally got around to chopping up an old reed block to provide a proper 'chamber' to sound the reeds on, I then checked the same plates again and found that one was tuned even, one quite sharp and the last about 4 cents flat.

My conclusion from this experiment is that anyone doing a full reed overhaul would do well to buy an old clunker melodeon to scavenge or get a set of old PA reeds blocks off ebay (they turn up fairly often), use a few reed plates to practice tuning on and chop up the blocks for sounding the reeds during tuning. If the reeds were waxed on, clean up the blocks and stick a bit of chamois or bellows gasket around the apertures you'll be using. Simply holding the reed against the block gives quite a good seal, you'll still have to fine tune it after waxing the reeds back but I think it will tuned be much closer this way.

Speaking of fine tuning, my new Hohner tools arrived this week from Sutherland Trading. Somehow they managed to miss out the most important one, a 1mm reed scraper which I'm chasing up, but I did get the spare tip I ordered which is actually long enough to use without the proper handle. Now for the mystifying bit. I expected the tip to have a burr around it, a little like a cabinet scraper, but it is perfectly smooth and doesn't scratch anything! The tip is hollow too, like a tube, which surprised me; so how do I create the cutting burr? THEO! HELP!  ???
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: Refurbishing an old Hohner
« Reply #79 on: October 02, 2008, 07:37:16 PM »

New reeds are usually supplied about 10 cents sharp.

well Theo, the Binci reeds I got a month ago was just about all tuned -20 cents...
Logged
Pages: 1 2 3 [4] 5 6 7 8   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal