I have tried some of the super glue species (cyanoacrylate) to attach leather valves. I prefer the thicker gel-like variety. Reed plate must be pretty clean and free of wax. A small dab or two on the valve, then press into place. The thicker glue allows you an interval to align the valve into exact position, then press firmly for about 10 seconds. Put aside a minute or two, it's fully set. After a year or so of playing, none of mine have fallen off (yet). It's no problem to peel off a valve glued down by this method, and the residual dried glue can easily be scraped off with a small scraper, no more difficult than the residue from standard adhesives.
If anyone knows a good reason
not to use this type of adhesive, I would like to hear why. Regard this method as experimental
