Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Re: Picture gallery?  (Read 8831 times)

0 Members and 1 Guest are viewing this topic.

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Picture gallery?
« on: November 20, 2010, 03:48:50 AM »

I'd be interested in pictures of instrument repair projects. Before and after pictures of valve replacement, pallet refacing, tools used. The biggest thing that would be a help to me, and I think, to others, is pictures of tuning setups, use of the tools to get to reeds, use of the scratchers/files/abrasive sticks and whatever. Videos of how to scratch the center of a reed or the tip of a reed, how to support the reed while working on it, that sort of thing would be very helpful.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Picture gallery?
« Reply #1 on: November 20, 2010, 10:59:41 AM »

Unfortunately your request has just missed a pallet refacing stint in my workshop so I have no photos but will try to record the other tasks I am doing and stick them up on the net somewhere. Watch this space.

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Picture gallery?
« Reply #2 on: November 20, 2010, 03:25:05 PM »

I would probably find this useful as well :P I would take pictures of what I'm doing, but I'm probably doing most of it wrong :P
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Picture gallery?
« Reply #3 on: November 20, 2010, 03:48:28 PM »

I would take pictures of what I'm doing, but I'm probably doing most of it wrong :P

Which in itself is useful information to everyone else...... ;D
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Picture gallery?
« Reply #4 on: November 20, 2010, 06:14:53 PM »

Another item to add to the list of images and videos:

Testing for air leaks in all the various places that leak. Pallets, valves, bellows especially.

Valves may not be needed here, other than a photo or two of what happens to leather valves over time. I get the impression that valves are a fairly easy fix and visual inspection is about all that's needed. However, photos of how to prepare the leather, proper placement, how to fit/attach new valves, attaching the keeper wires and how to bend them for proper voicing. I suppose I could go on and on.

I'm about to start my own first project fixing up an older black Erica that's in need of a complete overhaul, rewaxing of all the reeds, tuning, chasing air leaks, new pallet facing, and I don't know what else. I bought the black erica that came up for sale on Melnet two days ago with T dot reeds and am very excited. Can't wait to get it in my hands. I will certainly be coming back to this forum for advice.

One thing that might be helpful for the melnet website is a folder where folders and photos can be dropped.

Ed

Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Picture gallery?
« Reply #5 on: November 25, 2010, 07:35:32 PM »

Here are some images of the work so far on my 1140 refurbishment. Eventually it will have, one new pallet, new pallet leathers, re-valved reeds, re-wax, new grille, new bass end plate (the original is missing), and a retune plus any other fixes on the way. I will add new photos as I go

http://picasaweb.google.com/lester.bailey/1140Refurbishment#

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Picture gallery?
« Reply #6 on: November 25, 2010, 07:42:02 PM »

Looks scarily similar to what I was doing last week Lester :P I like your reed stand, I need to think of a better way of organising mine before I get onto my 2 row 2 voice Welty.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Picture gallery?
« Reply #7 on: December 07, 2010, 02:32:54 AM »

Lester,

Thanks for all the photos documenting your progress. They are a wonderful help to me. I'm still waiting on materials from Charlie Marshall for my two projects, a Black Erica in G/C and a Honey Presswood that will be retuned to D/G. Both need new pallet facings, bellows gaskets replaced, complete revalve, new grille cloth on both ends, fettling of the action on the treble end (thanks to Theo), rewax and tune. Lots to do.

Ed
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Picture gallery?
« Reply #8 on: December 07, 2010, 11:41:58 AM »

Another slide show, this one of Lester's method of bellows re-taping. There are no pictures of the tape removal process as I did not have enough hands free, what I do is remove as much tape as possible with a bluntish craft knife then use judicial amounts of dampness to remove the more stubborn bits and the old glue residue using the back of a scalpel as a scraper.

When applying the tape I tend to do half of a long side or all of a short side in one go prior to clamping for the glue to set, this is because of the amount of time it takes to apply the glue to the tape and thus the amount of time the first bit of tape applied has to move around, slacken off, etc prior to the bellows being being clamped.

http://picasaweb.google.com/lester.bailey/BellowsTaping#

« Last Edit: December 07, 2010, 11:47:05 AM by Lester »
Logged

tedrick

  • Guest
Re: Picture gallery?
« Reply #9 on: December 07, 2010, 12:09:48 PM »

Thanks for doing this -
I'm learning a lot from see the step by steps --

Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Picture gallery?
« Reply #10 on: December 07, 2010, 12:56:28 PM »

That is helpful Lester (:)
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Picture gallery?
« Reply #11 on: December 07, 2010, 05:52:49 PM »

Lester, thanks for putting up the bellows repair pics. That is a lot of work. My Presswood is in need of much the same sort of treatment. Not sure if I should recover the inside folds with new paper to strengthen that up.

One question that I'd like opinions about is whether to cut a slot in the end of each of the bellows tapes to expose the full length of the metal corner piece for later repair, if necessary. I see that you've covered the ends of the metal corners. I've also seen other melodeons, obviously repaired, that had a slot cut out of the tape for the metal corner brace.

What's the best practice there?

Ed
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Picture gallery?
« Reply #12 on: December 07, 2010, 06:30:17 PM »

As far as I can recall, every box I've owned has had the tape covering the ends of the metal corners. Certainly all of the 8 I currently own do.
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Picture gallery?
« Reply #13 on: December 07, 2010, 07:11:03 PM »

Here are some images of the work so far on my 1140 refurbishment. Eventually it will have, one new pallet, new pallet leathers, re-valved reeds, re-wax, new grille, new bass end plate (the original is missing), and a retune plus any other fixes on the way. I will add new photos as I go

http://picasaweb.google.com/lester.bailey/1140Refurbishment#

Thanks for putting these photos up. Did I say that already?

I'm sick in bed, have been for the past two and a half days and itching to get into the shop to start work on my Presswood repair! So I'm reading through the archives and making a nuisance of myself with lots of questions. Here's another one...

Lester, what kind of material did you use for your valves on the 1140 refurbishment? I can't tell whether they're leather with a plastic spring or the vinyl valves from Charlie. I've got the standard Hohner melodeon replacement kit coming from Charlie, but I'm wondering if I should go for leather on the lower notes anyway. I know there's a difference in the sound quality.

Also, what's the block you used for removing rust on the reeds? It did a great job and looks like it didn't harm the reeds in the least. Need something like that. Lots of rusty reeds on the Presswood.

Thanks,

Ed
« Last Edit: December 07, 2010, 07:13:12 PM by Telemorris »
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Picture gallery?
« Reply #14 on: December 07, 2010, 07:24:36 PM »

The valves are all from Charlie's valve kit. The cleaning block is from maplins

http://mobile.maplin.co.uk/module.aspx?moduleno=2109&criteria=cleaning%20block&doy=14m8

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Picture gallery?
« Reply #15 on: December 07, 2010, 09:24:53 PM »

Thank you Lester!

Anyone in the US know where I can find this:

http://www.maplin.co.uk/Module.aspx?ModuleNo=2109

Preferably in the Portland,Oregon area.

Thanks,

Ed
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Picture gallery?
« Reply #16 on: December 07, 2010, 09:37:25 PM »

That's a pretty generic item and you'd probably be able to get something like that at any decent electronics store. Off the top of my head, the closest thing to Maplin I can think of in the US is probably RadioShack.
Logged

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Picture gallery?
« Reply #17 on: December 08, 2010, 12:45:09 PM »

Another slide show, this one of Lester's method of bellows re-taping. There are no pictures of the tape removal process as I did not have enough hands free, what I do is remove as much tape as possible with a bluntish craft knife then use judicial amounts of dampness to remove the more stubborn bits and the old glue residue using the back of a scalpel as a scraper.

When applying the tape I tend to do half of a long side or all of a short side in one go prior to clamping for the glue to set, this is because of the amount of time it takes to apply the glue to the tape and thus the amount of time the first bit of tape applied has to move around, slacken off, etc prior to the bellows being being clamped.

http://picasaweb.google.com/lester.bailey/BellowsTaping#

Even if any dampening is minimal, it is advisable to clamp/press the bellows shut until thoroughly dry, interleaving the folds unless every vestage of old glue has been removed.
Simple precaution when using striped tape, which will produce a diagonal pattern on the fold-edges.
Ensure that every strip follows the same direction from the roll or it looks a mess when the bellows are closed.

Logged

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Picture gallery?
« Reply #18 on: December 08, 2010, 09:32:37 PM »

http://www.maplin.co.uk/Module.aspx?ModuleNo=2109

That's a pretty generic item and you'd probably be able to get something like that at any decent electronics store. Off the top of my head, the closest thing to Maplin I can think of in the US is probably RadioShack.

I would have thought it a fairly generic item myself but I'm having problems finding any reference to a solid cleaner or polisher for PCBs. All I can find for cleaning PCBs at Radio Shack is Etchant solution. I went to Fry's electronics this morning and the clerk looked like he'd never heard of such a thing as a polishing or solid cleaning block for PCBs.

I think I may be missing something in the description. Seems strange that I can't find it here. Are there any other fields that might use this kind of product/tool?

Thanks
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Picture gallery?
« Reply #19 on: January 28, 2011, 08:55:28 PM »

The valves are all from Charlie's valve kit. The cleaning block is from maplins

http://mobile.maplin.co.uk/module.aspx?moduleno=2109&criteria=cleaning%20block&doy=14m8

I've looked and looked in the US and don't find a PCB cleaning block available anywhere. Radio Shack, Jameco, Frys Electronics, local specialty shops, if they'v heard of the block it's ancient history and not carried any more. I tried to order a block from Maplin and they don't deliver to the US. I'd like to get one of these polishing blocks because it seems to take care of rust removal and cleaning of the reed plate too. Anyone have an idea of how to get one of these polishing blocks or something that does the same job? I've tried sandpaper but am not happy with it because even fine grit - 600, 1200, or higher - will take metal off and change the pitch of the reed.

I did discover a clay based product that's used for polishing the paint on a car. Has anyone tried such a product for rust removal and reed cleanup? I suspect the clay leaves an oily residue.

Any ideas?
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal