Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3   Go Down

Author Topic: Reed tuning tools  (Read 15284 times)

0 Members and 1 Guest are viewing this topic.

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Reed tuning tools
« on: November 24, 2010, 01:03:32 AM »

I've got some time coming up in the shop this weekend and want to put together some reed tuning and waxing tools in anticipation of my new project. I've seen some drawings and small scale photos of different sets of tools. Making the tools should be fairly easy since most of them look very simple.

I'm hoping someone will be willing to put together a photo of their tool set with descriptions and measurements. Photographing the tools against graph paper would allow me to derive my own measurements if that's easier for you. Tool materials listed in the description will be a great help - brass, steel, plastic, whatever you've used. Also, what kinds of files do you use, what sizes, how have you modified them to suit your hands or style of work?

Anything you can add in the way of photos of how some of the tools are used will be greatly appreciated. For example, I still haven't figured out how the tool made from heavy wire (brass?) with a "U" shaped bend in the end, is used. I gather it's used to support a reed while you're working on it but I have yet to figure that one out.

Thanks in advance!
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Reed tuning tools
« Reply #1 on: November 24, 2010, 01:22:22 AM »

I still haven't figured out how the tool made from heavy wire (brass?) with a "U" shaped bend in the end, is used. I gather it's used to support a reed while you're working on it but I have yet to figure that one out.
Have a look at this set of Theo's photos.
http://www.facebook.com/album.php?aid=95032&id=709188166&l=5be6150682
The last four in the set show the Italian style reed lifter in use. The tool is used to access the underneath reed tongues to allow you to file or scratch the tongue. You insert the hook underneath the adjacent (uppermost) reed tongue and then carefully work it across to raise the underneath reed tongue out beyond its slot. Once it has cleared the slot, you can then inert a thin shim under the reed tongue to support it while you work on it.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Reed tuning tools
« Reply #2 on: November 24, 2010, 01:27:40 AM »

Thank you very much! That's exactly the kind of thing I've needed to see. I haven't run into this link before. I need to spend some time on Theo's Facebook site.

Thanks again!
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Reed tuning tools
« Reply #3 on: November 24, 2010, 01:41:42 AM »

Beat me to it Steve!

My missing piece of equipment for starting on tuning is a scratcher and I'm not sure what I'm going to do about it. If you have any brainwaves then I'd be interested.

Reed lifters can be made out of thin pieces of brass. Having a bit of steel filed to a blunt edge on one end is also great for scraping off old wax without marking the wood. CGM sell reed pingers. I don't know what they are, but the treble reed pinger when reshaped (with scissors, it's very thin brass) makes a good reed lifter and the bass pinger is a scraper as I have described.

My initial experiments seem to indicate that for small reeds the reed lifting method is easiest (although it does require a little practice to get consistently right) and that the hook method works best on larger reeds. Don't take my word for it though! Experiment.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: Reed tuning tools
« Reply #4 on: November 24, 2010, 06:50:09 AM »

CGM have sets and individual pieces for sale. I've got a set and its rather good (certainly better than my bodge tools).
Logged

HallelujahAl

  • Guest
Re: Reed tuning tools
« Reply #5 on: November 24, 2010, 11:00:59 AM »

Quote
My missing piece of equipment for starting on tuning is a scratcher and I'm not sure what I'm going to do about it. If you have any brainwaves then I'd be interested.
Our street market has a tool stall that often sells dental tools very cheaply, my scratcher cost me one whole £.
 ;D
Logged

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Reed tuning tools
« Reply #6 on: November 24, 2010, 05:22:39 PM »

Scratcher design and shaping is a good topic. I haven't discovered much about that yet though I've picked up a few bits and pieces of information.

I hope the following makes sense: ???

Composition:
1. File steel or tool steel (must be hard enough to make a mark on the reed which is hardened steel?). I've been thinking of buying some drill stock in a few different diameters but I don't know if drill stock is hard enough to make a mark on the reed tongues.
2. Sandpaper of fairly fine grit: 400 grit, coarser/finer?
3. Fiberglass pen for cleaning the reeds of rust and dirt. I did see a mention that a fiberglass pen can do some tuning on smaller reeds

Shapes:
1. Round cylinder ground and polished on the end. The end is cut perpendicular to the shaft (90 degrees). Sizes range from .8mm to about 1.5mm or larger? Does anyone shape their tool edges differently, to a different geometry?
2. Flat and rounded file profiles
3. Sharp pointed engraver of some kind that cuts one scratch or groove rather than surfacing an area.
4. Shaped stick to provide backing for sandpaper.

A photo of your tools would help, a picture being worth a thousand words.

I've found a reference to Theo's preferred file though I haven't found a link to the place to purchase said file. Also, I'm in the US and would prefer to go to a more local tool supplier if I can so a description of the type of file, type of steel, and hardness is appreciated.

Thanks!
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Reed tuning tools
« Reply #7 on: November 24, 2010, 07:30:47 PM »

Hi Telemorris,

What you colonials call Drill Stock is very similar to our silver steel, i.e a water hardening high carbon steel, in its purchased state it will not be hard enough but if filed to shape, covered with soft soap (to avoid surface corrosion)heated to red / orange heat in a flame such as a propane / butane torch and held for a minute or so and then plunged vertically in cold water or cold water with a little salt dissolved will give you a near glass hard surface, a final touch up of the cutting edge on an oilstone or diamond pad will give you a very sharp edge, it is brittle but unless you put any bending load on it should not break, try the very end and if concerned repeat process and then drop it into a hot fat frier or other hot oil container for a minute or two to temper it a little.

I've heard of Stateside folk periodically touching the tool as it is being heated with a magnet, when it looses any attraction to the magnet its hot enough, not something we seem to have learned back here.

Have fun and remember sharp tools cut, hot flames burn and a reed is for life not just Christmas.


Richard, see, amidst the winter snow of Norfolk - anyone else getting the white stuff yet ?
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Reed tuning tools
« Reply #8 on: November 24, 2010, 11:22:53 PM »

For a scratcher I use a round needle file with the file teeth ground off.
The pointy end is then rubbed on a diamond stone thingy at 90 degrees.
You need to end up with a flat tip with sharp edges.
Mine was bought ready made from a little shop in Castelfidardo but it's easy to make your own.
I have fitted a wooden knob to the blunt end which rests neatly against the palm of my hand.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Reed tuning tools
« Reply #9 on: November 25, 2010, 02:20:19 AM »

Hi Telemorris,
I've heard of Stateside folk periodically touching the tool as it is being heated with a magnet, when it looses any attraction to the magnet its hot enough, not something we seem to have learned back here.

Have not heard of that....sounds interesting. Have done a bit of tempering based on color.

Richard, see, amidst the winter snow of Norfolk - anyone else getting the white stuff yet ?

Getting white stuff here on the east slopes of the Cascades in Northwestern US, and a balmy -4F (-20 C) last night!
Logged

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Reed tuning tools
« Reply #10 on: November 25, 2010, 05:59:28 AM »

I'm afraid that without proper tuition, experience and knowledge your chance of succeding is not so good.
Logged

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: Reed tuning tools
« Reply #11 on: November 25, 2010, 07:03:28 AM »

I'm afraid that without proper tuition, experience and knowledge your chance of succeding is not so good.

Bah, humbug. All I did to learn was start hacking away at the insides of an old box. It doesn't play as well the ones I do now, but it was a 'success' as far as I was concerned. You make mistakes, learn from them, and do things differently on the second, third, firth, tenth boxes you refurbish. I would say go for it.
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Reed tuning tools
« Reply #12 on: November 25, 2010, 07:56:04 AM »

I'm afraid that without proper tuition, experience and knowledge your chance of succeding is not so good.

Bah, humbug. All I did to learn was start hacking away at the insides of an old box. It doesn't play as well the ones I do now, but it was a 'success' as far as I was concerned. You make mistakes, learn from them, and do things differently on the second, third, firth, tenth boxes you refurbish. I would say go for it.
Totally agree with LJC, with the additional remark that there are experts on this forum with a wealth of experience and knowledge (you know who you are!) which they unselfishly and unstintingly share with those like myself who are still at the learning stage. To these experts I offer my sincerest thanks!
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Reed tuning tools
« Reply #13 on: November 25, 2010, 09:38:02 AM »

I do not really care if someone decides to damage his or her own box, but the matter becomes slightly different when amateurs start "hacking away" at other peoples' property and even get paid for it. Seen quite a few examples!
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed tuning tools
« Reply #14 on: November 25, 2010, 09:54:07 AM »

I'm afraid that without proper tuition, experience and knowledge your chance of succeding is not so good.

So where can you suggest that proper tuition can found?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Reed tuning tools
« Reply #15 on: November 25, 2010, 10:14:29 AM »

Looking for some lessons, Theo?  ;)
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Reed tuning tools
« Reply #16 on: November 25, 2010, 10:46:51 AM »

The best place I know of (from personal experience) is Germany, where it would take 3 to 4 years. Upon passing the final exams (written, oral, practical) you get an official diploma ("Handzuginstrumentenmacher"). You can, by investing even more time, go for the "Meisterbrief".
I've also heard of a school in the USA (Duluth, if I'm not mistaken) that offers a 1 year course.
There used to be a school in Finland, maybe Mr. Luukinen could enlighten us.
Schools and nice diplomas being one thing, I'm sure a lot, if not more, can be picked up at established workshops such as Theos' and others or even accordion factories.
Exchanging opinions and photos over the internet may certainly be useful, but it is, in my opinion, not enough for those who are aspiring to a little more than just basic knowledge.

 
« Last Edit: November 25, 2010, 11:05:58 AM by diatonix »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed tuning tools
« Reply #17 on: November 25, 2010, 11:23:13 AM »

I'm sure a lot, if not more, can be picked up at established workshops such as Theos' and others

That's a very nice compliment, thank you.  But I have no formal training,  I'm entirely self taught but I have received useful small but important snippets of information and advice from many people.  My accreditation is the recommendation of happy clients.

I still keep one of the first boxes I renovated and converted from C/F to D/G - it is a terrible piece of work, but I find it a useful reminder!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Reed tuning tools
« Reply #18 on: November 25, 2010, 11:30:46 AM »

I still keep one of the first boxes I renovated and converted from C/F to D/G - it is a terrible piece of work, but I find it a useful reminder!

I think it's as important to know what not to do as what to do, experience is such a good, if not slow, teacher in that regard. (:)

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Reed tuning tools
« Reply #19 on: November 25, 2010, 11:54:17 AM »

I'm afraid that without proper tuition, experience and knowledge your chance of succeding (sic) is not so good.

I have to say I find that a very negative attitude, not to mention a "Catch 22" - you can't tune a box until you've got some experience, and you can't get experience without tuning a box. Lots of craftspeople I know have little or no formal training, but still produce excellent, high-quality, up-market items that sell well in top-end galleries and fairs. I don't think Telemorris is intending to set up in business as a tuner and restorer (well, not yet, anyway!), but simply wants to extend his (I'm presuming he's a "he", but if he's a "she", then "her") own skills and knowledge, learn more about the workings of an accordion, and bask in the satisfaction of a job done to the best of his/her ability. And as has been said by several posters, experience is the best teacher, so each subsequent tuning/restoration job will be that little bit better than the last one. I no longer have the first guitar I ever made, many many years ago, and frankly I'm quite glad, because it would be a source of permanent acute embarrassment; but I'm quite pleased with instruments I produce now. Tuition? Well, not much - certainly no formal qualifications. Experience? Yes lots of it, and lots of mistakes (some quite costly in one way or another) on the way. Knowledge? Yes, gained from many sources - other makers, books, forums such as this one. Telemorris, go for it; have faith in your own abilities and don't listen to the Cassandras. As the cliché goes (and it wouldn't have become a cliché if it weren't true), he who never made a mistake never made anything.

Blimey, I didn't intend to go on that long! Rant over........
« Last Edit: November 25, 2010, 02:06:42 PM by GPS »
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine
Pages: [1] 2 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal