Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: Reed tuning tools  (Read 15299 times)

0 Members and 1 Guest are viewing this topic.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed tuning tools
« Reply #20 on: November 25, 2010, 11:57:38 AM »

I do not really care if someone decides to damage his or her own box, but the matter becomes slightly different when amateurs start "hacking away" at other peoples' property and even get paid for it. Seen quite a few examples!

I've seen a few examples of poor workmanship too,  and not all by amateurs!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Reed tuning tools
« Reply #21 on: November 25, 2010, 01:57:59 PM »

The very worst ones are people who have gained some kind of qualification but haven't honed their craft sufficiently and think the fact they have some kind of certificate makes them infallible and they proceed to charge people to ruin their instruments.

Amateurs with no specific formal training have been responsible for some of the most desireable instruments ever made and some of the biggest leaps forward in instrument design. What's really important is to have the right attitude and aptitude and I don't think you can teach them to someone who doesn't have either.

I agree with Diatonix to a certain extent but I don't think a lack of "proper" tuition is a bar to success, nor do I think proper tuition is a guarantee of quality.

*edited to add*

http://www.cumpiano.com/Home/Articles/Articles/pedagog.htm


That article should be required reading for anyone considering musical instrument work IMHO.
« Last Edit: November 25, 2010, 02:13:50 PM by Andy Simpson »
Logged

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Reed tuning tools
« Reply #22 on: November 25, 2010, 02:12:52 PM »

I fully agree with Andy. My first comment was only meant to be realistic, my apologies to those who perceived it as negative, which was
not my intention.
Logged

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Reed tuning tools
« Reply #23 on: November 25, 2010, 02:28:33 PM »

It is a bit tricky to give advice in these situations. I'm often asked for advice about making guitars and initially it can sometimes be hard to tell apart someone with good intentions and realistic expectations from someone who's only ever going to wreck some perfectly good instruments and waste expensive materials.
Logged

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Reed tuning tools
« Reply #24 on: November 25, 2010, 04:33:44 PM »

Thanks to all those who've said, essentially, "go for it."

Suffice to say that I've been a professional calibre craftsman all my life, done a stint, with tuition, as a Luthier, plus many other highly technical and exacting professions. The one I just left was telescope mirror making, one of the most critically exacting professions there is. I have customers all over the world with no complaints that I've ever heard. I too have kept the first mirror I ever made, in a box, on the shelf. By my standards now, it's a horrible piece of junk, but it started me on that road and gave me many hours of pleasure looking at the stars and planets.

Diatronix, I do understand the concern that someone might go off half-cocked, advertising their "skills" after a few tries. That's not me. I don't stop work on something until it's done right, just ask my wife. I've also promised myself (and my wife) that this hobby will remain a hobby and not turn into yet another profession.

I'm looking forward to the challenges, the mistakes, the acquisition of a new set of skills, and, most of all, a new instrument that I can play for my Morris dance team (Bridgetown Morrismen).

Happy Thanksgiving!

Ed Stevens
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Reed tuning tools
« Reply #25 on: November 25, 2010, 05:00:58 PM »

Hi Telemorris,
I've heard of Stateside folk periodically touching the tool as it is being heated with a magnet, when it looses any attraction to the magnet its hot enough, not something we seem to have learned back here.

Have not heard of that....sounds interesting. Have done a bit of tempering based on color.


Just to make sure I've not misled, the magnet is used on the hardening part of the process and detects what I believe is called the Curie point, at which point the structure alters and the iron content ceases to be magnetic, this structure 'frozen' by the quench. There has been much written on heasting colours and the famous 'Cherry Red' used for this process ought more realistically be called Carrot Red (or Orange !) in a dull ambient light.

I thought I would give tempering details a wide berth  >:E suffice it to say we know reeds are tempered out to deep blue like clock springs so you temper drill rod to blue and it probably will not cut although it may well still scratch....

I read of the magnet trick in a series of books by a canuck called Guy Lautard known as the Machinists Bedside Reader Vols 1 2 & 3 (warning do not ask Library or booksture for the Masochists Bedside Reader or strange looks may result  :o Anyone interested in metal tinkering will find reams of interesting material in these .

Further to the comments on amateur versus professional, amateur is derived from 'lover of', some amateurs are professional in that they derive their living from the practice but not all professionals take the same degree of love, care and pride in their activities, thankfully we are blessed with numerous of the former to keep our treasured boxes in good order and the atrocities we rank amateurs (more enthusiasm than skill) wreak upon our boxes are [mostly] kept under wraps - each mistake made, when fully understood, is another step along the pathway towards some of the skills we value in our 'proper' pro's

Go for it Telemorris, let us learn from your mistakes and share your sucesses !

Richard
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Reed tuning tools
« Reply #26 on: November 25, 2010, 05:20:07 PM »

I've found a reference to Theo's preferred file though I haven't found a link to the place to purchase said file.

You rang...

http://forum.melodeon.net/index.php/topic,504.msg3802.html#msg3802

and I've been using this for years for the advertised use of dressing fret ends but I like it for smaller reeds...

http://www.stewmac.com/shop/Fretting_supplies/Shaping_and_crowning/Fret_End_Dressing_File.html

My own advice here would be not to spend too much time fretting over what other people use and get stuck in, there are tools and methods that some people swear by that others of the same skill level can't really get on with. Make or buy some of the ones you like the look of and practise with them on some junk reeds to find out which ones work for you.
Logged

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Reed tuning tools
« Reply #27 on: November 25, 2010, 06:35:12 PM »


...... But I have no formal training,  I'm entirely self taught but I have received useful small but important snippets of information and advice from many people.  My accreditation is the recommendation of happy clients......


  I certainly don't find any problem with that, Theo.....all the skills and information are out there to be learned, and it certainly takes practice and patience to accomplish the task. It's not necessarily the divine art that some 'experts' would have us believe.
   My first instruments were tuned by a gentleman who was billed as being trained by several "old world" masters, and my experiences with him and his work ethic were costly and disappointing. While I fully believe that he was capable of doing excellent work, it seems that he was more willing to do as little as possible for the greatest cash outlay. After my last encounter, and an outlay of over $500 for a spot tuning, (with a rather dodgy outcome), I took matters in hand and decided to do my own tuning, having no other resource here in my locale. I have no ambition to pursue this as a profession, and simply do it for myself.
Logged

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Reed tuning tools
« Reply #28 on: November 25, 2010, 07:16:40 PM »

Thanks to all those who've said, essentially, "go for it."
 
I'm looking forward to the challenges, the mistakes, the acquisition of a new set of skills, and, most of all, a new instrument that I can play for my Morris dance team (Bridgetown Morrismen).

Ed Stevens

Go for it indeed....my first major attempt (beyond the adjustment of a reed or two) was an ancient Hohner Erica, (one of the wooden ones). It reeked of cigar smoke, had curly leathers, several broken reeds, rusty grille, etc....the perfect project box! I don't think I could have decreased it's value any further with my efforts. That exercise was a great learning experience for me. I was able to put it into a condition where I could actually sit and play tunes on it. It had a charmingly discordant sound, sort of like a honky-tonk piano.  :||:

Just to make sure I've not misled, the magnet is used on the hardening part of the process....

Aha.

I thought I would give tempering details a wide berth  suffice it to say we know reeds are tempered out to deep blue like clock springs so you temper drill rod to blue and it probably will not cut although it may well still scratch....

The coloring I mentioned was after a brief quenching of cherry red stock; a quick polish of the working end of the tool, and then watch the residual heat creep back in. When the correct color appears, do the final quench. In the case of a metal cutting tool, a straw or light yellow would yield a hard edge suitable for metal cutting. If you linger to a blue, it will be elastic and much less brittle,  desirable of a spring. Here's a link to a handy chart:
http://www.engineeringtoolbox.com/tempering-colors-steel-d_1530.html


Logged

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: Reed tuning tools
« Reply #29 on: November 25, 2010, 08:27:07 PM »

My mantra for adjusting any instrument is that you can always take more off, but you cant put it back again! I think with a little care and patience you can get a surprisingly good result, and with a little guidance from the net/books/friends/whatever you can actually do a better job than some rushed shop craftsman bashing out another repair on a Friday afternoon. Buy one of those sub-£100 Hohner 4 bass/1 rows from eBay, start small, and build yourself up from there.
Logged

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Reed tuning tools
« Reply #30 on: November 26, 2010, 04:04:08 AM »

I am keeping my eye out for a cheap fixer-upper box and will do a great deal of experimenting on that one first. Right now, I'm going to work on getting some tools together, especially a tuner. I'll be looking through the archives over the next few days for more information about tuners. I'm leaning more and more toward a computer tuner because of the ability to evaluate two reeds together. It may be more complex, with a steeper learning curve, but it appears to be a good way to go at the moment.


Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed tuning tools
« Reply #31 on: November 26, 2010, 08:12:09 AM »

I'll be looking through the archives over the next few days for more information about tuners. I'm leaning more and more toward a computer tuner because of the ability to evaluate two reeds together.


Electronic tuners are very useful, but the ultimate test of how an instrument sounds is the ear, so expect to do some ear training too.


Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Gandy

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 407
Re: Reed tuning tools
« Reply #32 on: November 26, 2010, 08:48:52 AM »

I keep meaning to try for myself, but I'm told that scrap Allen keys make good material for small cutting tools, and that it hardens nicely.  I have plenty to try (duplicates, and old corroded or rounded off that I've found in various places over the years).   The specific context was to make small knife blades, maybe that's not hard enough for reed scratching.   I can't remember if it should be water or oil hardened but I believe the general advice is to use oil if you're not sure.
Logged
Tony S

Fidjit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 538
    • my space on My Space
Re: Reed tuning tools
« Reply #33 on: November 26, 2010, 09:55:02 AM »

Theo & Rees
I'm still working on my first project that you two rejected and said should just be thrown away. :|bl
It's a learning process project for me and I think I am succeeding. Just.  :Ph

Haven't touched any reeds yet though. :-\
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Reed tuning tools
« Reply #34 on: November 26, 2010, 02:51:21 PM »

Theo & Rees
I'm still working on my first project that you two rejected and said should just be thrown away. :|bl


Bless you, Chas. You're no quitter.  ;D
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Reed tuning tools
« Reply #35 on: November 26, 2010, 04:09:47 PM »

I'm afraid that without proper tuition, experience and knowledge your chance of succeding is not so good.

So where can you suggest that proper tuition can found?
met a nice chap in whelshpool very helpful
Logged

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Reed tuning tools
« Reply #36 on: November 26, 2010, 05:56:11 PM »

[/quote]
Electronic tuners are very useful, but the ultimate test of how an instrument sounds is the ear, so expect to do some ear training too.
[/quote]


I do understand what you're saying Theo. Having been a mirror maker, the most important element of the testing procedure is the person behind the tester. My biggest hurdle as a mirror maker was training my own eye to see and evaluate what I was seeing accurately. That takes an accurate tester, set up properly. But the person behind the tester must have the judgement and experience to know what to do with the information the tester provides. Experience is gained over time with much trial and error.

So too with a musical instrument. The tuner can only take me so far and then I have to use my own ear and judgement to finish the tuning process. As a former luthier, I remember hours of listening to the wood, tapping, scraping, planing, tapping again.

Ed
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Reed tuning tools
« Reply #37 on: January 06, 2011, 01:22:38 AM »

Telemorris, have you got a scratcher yet? I am still dithering over what to use :(
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Reed tuning tools
« Reply #38 on: January 06, 2011, 11:34:05 AM »

Telemorris, have you got a scratcher yet? I am still dithering over what to use :(

I've used a commercially made scratcher and made my own out of HSS drill bits and a round needle file.  By far the best is the one made from the needle file.  Needle files are cheap and are made of very hard steel so they hold an edge well.  You just grind the teeth off the tip for a few mm and the grind the tip flat on the end.  You can do this on an oil stone (which you will need anyway to sharpen it) but it's a very quick job if you know someone with a grinder.
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Reed tuning tools
« Reply #39 on: January 06, 2011, 12:22:45 PM »

Telemorris, have you got a scratcher yet? I am still dithering over what to use :(

I've used a commercially made scratcher and made my own out of HSS drill bits and a round needle file.  By far the best is the one made from the needle file.  Needle files are cheap and are made of very hard steel so they hold an edge well.  You just grind the teeth off the tip for a few mm and the grind the tip flat on the end.  You can do this on an oil stone (which you will need anyway to sharpen it) but it's a very quick job if you know someone with a grinder.

Ah, that sounds sensible, I'll try that. I've never used a grinder before, the oilstone sounds more comfortable :P
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal