Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Tuning bench setup  (Read 10399 times)

0 Members and 1 Guest are viewing this topic.

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Tuning bench setup
« on: November 29, 2010, 05:42:16 PM »

I have a request for those who do a fair amount of tuning. Please post some pics of your tuning setup or bench with bellows/air source for sounding reeds both in the box and outside of the box. I'm in the beginnings of what feels like a major retuning and want to make the process more efficient.

I've got an old Presswood Pokerwork that is very out of tune, probably started out at the older Hohner pitch for A (434??) and then went down hill from there. I've been thinking it might be easier to take all the reed plates off the reed block and get the inside and outside reeds fairly close before rewaxing and finishing the tuning in the instrument.

Thanks
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Tuning bench setup
« Reply #1 on: November 29, 2010, 05:54:15 PM »

Here are two shots of my tuning rig - loosely based on Rees' - click on the image for a bigger version.



It is made of some mdf and a set of bellows from a junk melodeon



Shown here with a Hohner Chord Reed Block over the air hole, laptop in background runs Dirks Tuner

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tuning bench setup
« Reply #2 on: November 29, 2010, 06:31:25 PM »

If you plan to do more tuning than just the occasional box and have a bit more space its well worth building a table with foot operated bellows.  I find its a big big help to have two hands free to manipulate the tuning tools.

I've added a couple of pictures to my Facebook album

This picture shows the top of the table where I can place a reedblock.  The bench is built from a 1990s school computer trolley.

This shows the very simple foot pedal mechanism.  Hands free is an essential for me.
« Last Edit: November 29, 2010, 06:35:20 PM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tuning bench setup
« Reply #3 on: November 29, 2010, 06:46:05 PM »

This photo shows the portable tuning bellows that I use at shows.  It is hand operated which is a real nuisance because it always results in the tea being spilled.

For some reason a number of my ex-friends find this picture amusing.  ;D
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Tuning bench setup
« Reply #4 on: November 29, 2010, 06:57:48 PM »

I just know that trolley at some point sported either a BBC Micro or one of those wood veneer cabinet TVs and a video machine the size of a small fridge that never worked properly...

My tuning setup looks almost exactly the same as Lester's...probably because it was also based on Rees's. ;D
Logged

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Tuning bench setup
« Reply #5 on: November 29, 2010, 07:54:51 PM »

Lester and Theo, thanks very much for the pics! I've got a junker coming from an ebay auction that should do perfectly for Lester's setup. I wish I could afford the space in my shop for Theo's setup. I may still figure out some sort of detachable lever that affords some kind of foot power for operating the bellows. I love figuring this stuff out.

I just bought a copy of Dirk's tuner after tuning a couple of reeds with the free version. It's a very powerful program! The program does seem to get confused at times and tell me the reed I'm working on is 30 cents sharp or flat, sometimes in two different readings! Then it will settle down. Do you know why the computerized tuner does that? Is it getting confused by harmonics that are too strong?

Thanks again for the photos. They make all the difference.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Tuning bench setup
« Reply #6 on: November 29, 2010, 08:31:39 PM »

There is some thing in my house that radiates G2 + 30 and that is were Dirk's will settle if left on its own - but that is 98hz so I guess it's the central heating pump in the next room as it has been much more apparent this week  ;)

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Tuning bench setup
« Reply #7 on: November 30, 2010, 11:50:16 AM »

Theo, it's so nice to see other people arrange their tools like I do.  My wife, the organization freak, has "offered" several time to come arrange things for me.  I told her I treat people who rearrange my stuff like I would if they were stealing it.

Really novel idea on the foot operated bellows stand.  I always divide my fingers, and sometimes mouth, for that so needed third hand.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tuning bench setup
« Reply #8 on: November 30, 2010, 12:22:27 PM »

Theo, it's so nice to see other people arrange their tools like I do.  My wife, the organization freak, has "offered" several time to come arrange things for me.  I told her I treat people who rearrange my stuff like I would if they were stealing it.

I needed a tool recently that I don't often use, but could not find it.  I searched all the workbenches where it usually lies.   Eventually I gave up a bought a new one.  Today I found it - I had carefully stored it away in a drawer!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

strad

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 418
Re: Tuning bench setup
« Reply #9 on: December 06, 2010, 03:58:46 PM »

Know what you mean, Theo! The washer on my outside standpipe went yesterday and I couldn't find where I'd put the spare ones. Today I went and bought a pack of washers and found the old pack when I got home. Where? Underneath the big shifter I was going to use to get the old tap undone. Oh Botheration! With music items this almost never happens. But then music gets done more often.

Nigel
Logged

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: Tuning bench setup
« Reply #10 on: December 06, 2010, 04:20:08 PM »

has anybody used an electric air pump instead of a spare set of bellows. Some years ago there was a guy fom I think, Halifax who used one with   success to tune concertinas. As far as I can recollect the pump was from a bontempi organ/keyboard or whatever they were called from? the 60's.

As far as I can see it would have given a dead even ( but not variable) rate of air delivery  i.e. same for all reeds  and it was very campact. . NOt sure if the pump motor effected the tuner as in Lesters central heating pump!

Just a bit of useless info - I have recently discovered that if I set my hearing aid d(standard NHS issue) to the 'loop' position & move head/ear/hearing aid along a wall I can very accurately locate any  electric cable by the buzzing sound that presumably a/c current makes!

george
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tuning bench setup
« Reply #11 on: December 06, 2010, 04:24:15 PM »

has anybody used an electric air pump instead of a spare set of bellows.

Could be ok for concertina reeds, but for melodeon and accordion reeds you need to be able to easily switch between suck and blow. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: Tuning bench setup
« Reply #12 on: December 06, 2010, 04:33:45 PM »

he had arranged switching to provide instant reverse!

george
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Tuning bench setup
« Reply #13 on: December 10, 2010, 02:57:20 PM »

And for tuning 1 rows with fixed blocks I use this, again ripped off from Rees/Theo, click on the image for bigger one.









Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tuning bench setup
« Reply #14 on: December 10, 2010, 03:07:00 PM »

And for tuning 1 rows with fixed blocks I use this, again ripped off from Rees/Theo, click on the image for bigger one.


I got that method from Emmanuel Pariselle
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Tuning bench setup
« Reply #15 on: December 12, 2010, 02:44:07 AM »

Theo and Lester

How big a hole did you drill in the table top for decent airflow? I see Theo uses two holes but they are different sizes.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Tuning bench setup
« Reply #16 on: December 12, 2010, 08:48:31 AM »

Theo and Lester

How big a hole did you drill in the table top for decent airflow? I see Theo uses two holes but they are different sizes.

Can't remember exactly but what I did was measure the hole on a pokerwork and drilled that size.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Tuning bench setup
« Reply #17 on: December 12, 2010, 08:58:26 AM »

Theo and Lester

How big a hole did you drill in the table top for decent airflow? I see Theo uses two holes but they are different sizes.

Can't remember exactly but what I did was measure the hole on a pokerwork and drilled that size.
I have two holes, side-by-side, the dimensions and spacing corresponding to the twin holes in the reed block of whatever instrument you are tuning. This is for sounding both reeds at once - for checking and adjusting tremolo. If I want to sound just a single reed, I cover one of the holes with a bit of insulating tape which can easily be peeled off and then replaced again many times, as required.

You can have various pairs of holes in different places on the tuning table top, to match up with different reed block dimensions - e.g. from different manufacturers, bass reed blocks, etc. Just cover them up with insulating tape when they are not in use.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Malcolm Austen

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 495
  • any old hohner
Re: Tuning bench setup
« Reply #18 on: December 12, 2010, 09:46:07 AM »

Is it just me or do others find it fascinating looking at other peoples workshops?
Logged
aka malodeon

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Tuning bench setup
« Reply #19 on: December 12, 2010, 08:51:41 PM »

Is it just me or do others find it fascinating looking at other peoples workshops?

Nope, fascinating for me too. I am now home, so have even less of a workshop than before (previously it was a coffee table), or I'd post a picture.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal