Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Castagnari max button  (Read 2545 times)

0 Members and 1 Guest are viewing this topic.

bosca

  • Member
  • *
  • Offline Offline
  • Posts: 15
Castagnari max button
« on: November 30, 2010, 11:17:12 PM »

Hi folks just lookin for some advice, i have a castagnari max and one of the buttons(springs?) seems to have gone stiff.

Eg, i push the button down to play the note and it does not come back up in the same way as the rest.

Is this somthing that i could look at myself or would i be better off getting a professional to do it?

I would not have done any box work before apart from opening them up to have a look at.

Thanks

Tom
Logged

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: Castagnari max button
« Reply #1 on: December 01, 2010, 07:05:23 AM »

Does the button feel like it moves freely? It could be the spring or it could be some wood warping in the mechanism. This causes friction and prevents the button returning to position. The Max keyboards are fairly basic so I would at least have a look.

Take the screws out of the black plastic keyboard and remove the plate -  you can now see the mechanism underneath. The springs are under the wooden leavers in a recess and are held in via a long brass rod. You can remove this rod out by pulling the end which sticks bottom of the box and has a small loop to stop it moving. As you pull the rod, when it comes free from the button/arm assembly, the arm will jump out because the spring is under it so a second pair of hands to hold them down can be useful.

You should now be able to see if a spring has broken. As you say the button has gone stiff I suspect it is wood warping/swelling. Take out the suspect arm and give it a wiggle in the slot to see if you can seat it in a way which is does move freely. If not you should get some fine sandpaper and gently remove a little from the arm and a little from the slot. Only remove a tiny fraction - try and see where the wood has warped and remove it there. Repeat until the arm moves properly and re assemble.

If you're not comfortable with this then it's time to take it to a repairer.
Logged

bosca

  • Member
  • *
  • Offline Offline
  • Posts: 15
Re: Castagnari max button
« Reply #2 on: December 01, 2010, 10:57:24 AM »

Thanks very much for the response,

I'll have a look using your advice and take it from there.

Thanks again,

Tom
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Castagnari max button
« Reply #3 on: December 01, 2010, 11:04:22 AM »


If you're not comfortable with this then it's time to take it to a repairer.

Pulling the axle rod can be a bit daunting,  putting it back more so!  If you go ahead make sure to mark the individual levers so you can replace them in the same positions.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Castagnari max button
« Reply #4 on: December 01, 2010, 12:09:48 PM »

Goog gad!  Aren't those screws tiny?!  When I find my glasses, I'll look for a small enough screwdriver and take a look at mine  - one of mine is a bit lifeless, too.  Still plays OK but slower then the rest.  I took it to be the cold and damp.

Rob.
Logged

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: Castagnari max button
« Reply #5 on: December 01, 2010, 01:31:38 PM »

I spilt a pint of Timothy Taylors on mine - had to take it apart in a beery haze when I got home to dry it out!  ::)
Logged

bosca

  • Member
  • *
  • Offline Offline
  • Posts: 15
Re: Castagnari max button
« Reply #6 on: December 01, 2010, 02:19:25 PM »

Still plays OK but slower then the rest.  I took it to be the cold and damp.

This sums up mine better than I put it, the button plays ok but not as good as the rest. Thanks for the advice and ill let ye know how I get on.

Thanks again
Logged

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Castagnari max button
« Reply #7 on: December 02, 2010, 01:44:28 AM »

Did the spring end "dig in" to the wood.... and create a different tension than the other buttons...

Have you removed the faceplate and looked at the mechanism ?
Logged

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: Castagnari max button
« Reply #8 on: December 02, 2010, 01:34:56 PM »

There is no faceplate or grill on a Max - they are made with an open front.
Logged

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Castagnari max button
« Reply #9 on: December 03, 2010, 01:57:09 AM »

I have owned 2 Max's  perhaps I am confused as to the actual problem ....
I have dismantled both of them.....have a complete album of photos
Logged

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: Castagnari max button
« Reply #10 on: December 03, 2010, 02:46:05 AM »

There is no faceplate or grill on a Max - they are made with an open front.

I believe that Jeff was referring to the faceplate on the keyboard, not a grill.  The keyboard does have a faceplate, attached with screws.  Remove it to reveal the button levers, under which you can find the springs.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal