Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Casali Verona outer row vibrations  (Read 1477 times)

0 Members and 1 Guest are viewing this topic.

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Casali Verona outer row vibrations
« on: December 05, 2010, 05:31:31 PM »

Hey all,

A niggling problem on my Casali is that the outer row vibrates. Whenever I press a key I can feel the arm vibrate under it, which is a nuisance. It is a simple lever and evidently the metal is not stiff enough to withstand the impulse without being excited. The key action is already limited by felt. I was wondering firstly whether anyone here who has a Casali or has played one has experienced something similar and secondly what I should do about it. Putting weight on the arm (if I remember my IA vibrations correctly) will change the frequency, rather than damp it. Putting tuned mass dampers on each arm would be stupid. The only thing that I can think of is to put a layer of felt under the grille, which would have to be carefully placed so as to not encumber the levers from the other two rows. That might work.

Any opinions?
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Mike Higgins

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 338
    • Strolling to Italy
Re: Casali Verona outer row vibrations
« Reply #1 on: December 05, 2010, 10:09:38 PM »

I have a Casali Verona and have not experienced this problem. A friend used to have one of these and tells me the same.
Logged
Mike from Ponte Caffaro

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Casali Verona outer row vibrations
« Reply #2 on: December 05, 2010, 10:21:03 PM »

Another option would be to put felt buffers under the keyboard top,  between the buttons as is common practice on many modern boxes.   This also has the advantage of cutting out rattles from buttons hitting the edges of the holes.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal