Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: What makes heavy a heavy diatonic accordion  (Read 17240 times)

0 Members and 2 Guests are viewing this topic.

pete /acorn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 930
  • .Cast Trilly
    • Acorn Instruments
Re: What makes heavy a heavy diatonic accordion
« Reply #20 on: December 09, 2010, 01:18:15 PM »

Hi,
This is a specially ground a mano reed.You really must try them before you order a box with them,they are very responsive,sometimes too responsive,depends on how you play.

Pete

Logged
Acorn Instruments are specialist retailers of Castagnari Instruments,and have an extensive stock of new instruments on the shelf for prompt delivery in standard layouts however these can easily be changed to customers special requirements,we have over 600 reeds in stock
 We also have the largest stock in the UK of  pre loved melodons all fully serviced,and with 12 months warranty
UK and international customers catered for
www.acorninstruments.co.uk

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: What makes heavy a heavy diatonic accordion
« Reply #21 on: December 09, 2010, 01:19:30 PM »

Hi,
I agree about the quality of reeds and valves making a big difference,when I do shows with the Manfrini accordions I have boxes with Tipo a mano reeds,on a couple of occasions I have had my daughters box with me,identical model to others on the stand, with A Mano bombatta reeds,customers could not believe the difference,so easy to play,these boxes weigh 10kg,4 voice treble,5 voice 96 bass.

Pete

I also  agree& would add that TWO decent, say 3 or 4inch straps make a huge difference to the feel of a box, although of course not actualy reducing the weight.

The other thing that has a huge effect on the perceived weight of a box is bellows technique or lack of!  On a diatonic box there is absolutely no need to open the bellows wide for most of most tunes and whwere a wide opening is requiered e.g. preceeding a long run of push notes, the bellows can be closed up immediately afterwards. Also tugging & shoving on the bellows is unnecesary &  removes all chance of  sensitive phrasing, dynamics etc - and makes it hard work!

In other words how you attach yourself to the box & how you play it are far more important than the actual weight.

george -( happy with a 2 row 3kg or an 80 bass 3 row - and anything in between)
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: What makes heavy a heavy diatonic accordion
« Reply #22 on: December 09, 2010, 01:31:22 PM »

Any boxes sold as being 'cassotto' are going to be heavy due to the nature of the construction. In terms of players who manage great things with heavy boxes - I can't imagine Riccado Tessi's 3 row 18 bass Castagnari is particularly light. I don't see why a heavy box should be any less responsive than a light box if they are both set up properly and the player is used to playing that specific size.

Personally, for playing contential styles with lots of chords, across the rows, I find weight and size no issue. Fast runs are executed to notes in the same direction meaning as long as you have the strength to move the bellows the speed and ease of playing will be determined by the quality of the reeds and the quality of the player.
Logged

nemethmik

  • Guest
Re: What makes heavy a heavy diatonic accordion
« Reply #23 on: December 09, 2010, 01:42:06 PM »

I have boxes with Tipo a mano reeds,... my daughters box with A Mano bombatta reeds
Pete, what you wrote is very interesting. Castagnari, Beltuna and B.Loffet makes professional boxes with "typo a mano" ("hand-made type" as seen on Castagnari webpages) reeds. I asked Castagnari about "a mano" reeds and they replied that for extra mony they are installing "a mano" reeds, if I want to. The same is the case with Beltuna. I asked Saltarelle, if the reeds in their top-grade models are of "typo a mano" or "a mano" and they replied that the Ocean, Neuilly, and many others are made with "a mano", reeds. If this is really true, this may explain why the hefty Neuilly and Ocean is so easy to play  ???
« Last Edit: December 09, 2010, 01:45:52 PM by Miklos Nemeth »
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: What makes heavy a heavy diatonic accordion
« Reply #24 on: December 09, 2010, 02:17:37 PM »

Apart from just having to hold the thing up, the weight of the treble end doesn't matter very much.
It's the bass end that has to be accelerated rapidly in alternate directions. In fact the inertia of a heavy treble end might even help, as you want that end to stay put.

I'm inclined to agree with those who claim that the quality of reeds and construction makes a difference. It's been pointed out to me more than once, for instance, that a Shand Morino is actually quite easy to play because it's so perfectly balanced and responsive, but it's a very heavy box when you put it on the scales.

On a three row box you may be able to save a lot of left arm effort by cross-fingering to reduce the number of bellows reversals. On a Steirische harmonika you are expected to play it that way.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: What makes heavy a heavy diatonic accordion
« Reply #25 on: December 09, 2010, 04:20:57 PM »

"Voci a mano bombate" is a sub-category of hand made Italian reeds and stands between "voci a mano standard" and the even more exclusive "voci tirate". But, again, there are excellent standard reeds, such as those made by the Binci family and there may also be not so excellent "bombate" or even "tirate" from other sources (the latter being offered by very few makers only: the technique is very time consuming which of course reflects itself in its price tag). As a consequence, knowing  who actually makes the reeds one is interested in, is very important, especially to those who aspire to making top notch boxes only.
 
Logged

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: What makes heavy a heavy diatonic accordion
« Reply #26 on: December 09, 2010, 04:59:11 PM »

I asked Saltarelle, if the reeds in their top-grade models are of "typo a mano" or "a mano" and they replied that the Ocean, Neuilly, and many others are made with "a mano", reeds. If this is really true, this may explain why the hefty Neuilly and Ocean is so easy to play  ???

With these Saltarelles, it is a really good idea, in my opinion, to try the particular box -- i.e., not just the same model, but rather, the exact box that is for sale, ready for you to take home.  My experience with them is that they can vary greatly as far as the quality of the reedwork.  Another approach is to buy through a dealer who will be willing to address any issues that you identify with the reedwork.  Saltarelle has some really great configurations available, but the devil is in the details, and it really is not clear who is handling the manufacture, the reed installation, and the tuning of any given box.  If you can either find one that plays at a level that is acceptable to you, or find a dealer who is capable of "making it so," go for it. 

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: What makes heavy a heavy diatonic accordion
« Reply #27 on: December 09, 2010, 05:35:23 PM »

Next time you ask "Saltarelle" ( I assume George Roux directly)  what maker of "a mano" reeds...


Please explain the physical differences/characteristics of the Bombate  and tirate... thanks

I  will assume the bombate is the reed with the cruved/domed/bombay top of the tongue...
I have had such a reed on older Italian boxes and saw them in a very plain Jane 2 row Italian box
from the thirties.. a very modestly made box with extraordinary tone and playability.
Logged

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: What makes heavy a heavy diatonic accordion
« Reply #28 on: December 10, 2010, 06:42:43 AM »

Apart from just having to hold the thing up, the weight of the treble end doesn't matter very much.
It's the bass end that has to be accelerated rapidly in alternate directions. In fact the inertia of a heavy treble end might even help, as you want that end to stay put.

I agree entirely, the weight of the bass end was what made my mind up about selling the Jorgina. The bellows were past their prime as well and with them even slightly open it felt like holding a breezeblock on a piece of string. After I sold it I was on the brink of commissioning a box from Olav Bergflodt as a replacement and one of the things I wanted was a stripped down left hand side with no switches and possibly not even any reedplates for the thirds at all to make it as light as possible, sort of a "racing trim" bass end.

Logged

nemethmik

  • Guest
Re: What makes heavy a heavy diatonic accordion
« Reply #29 on: December 10, 2010, 09:12:20 AM »

the weight of the bass end
Very smart point; but, how this concept can be applied to the heavy left sides (80-bass, for example) of BCC# boxes? Most BCC# players I saw on you tube moves these heavy bass ends as if they were feather-stuffed.
When a tune is played in C on a BCC#, I guess the number of bellows-reversals are not less than on a G/C.
Logged

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: What makes heavy a heavy diatonic accordion
« Reply #30 on: December 10, 2010, 11:05:43 AM »

Most BCC# players I saw on you tube moves these heavy bass ends as if they were feather-stuffed.

Hi Miklos,
This supports the point that I was trying to make.  There is some strength-building involved -- simply getting your body used to the heavier box.  Thus, people who aren't used to one could pick one up and easily dismiss as "too heavy."  But through building a relatively small amount of strength (it really is not heavy weight-lifting!) as well as developing really good bellows technique, the weight on the left side becomes irrelevant -- at least, on a high quality box where the reeds are properly set.
Very little bellows movement is necessary for rapid shifts, but this is a technique that takes some time and effort to learn.  Huge bellows movement is necessary for long passages in either direction, big chords, etc -- none of which comes into play when we are talking about rapid bellows shifts i.e. reels and jigs and so on.
I have an acquaintance who plays a huge Petosa piano accordion and is well-known for effectively making it sound like a diatonic accordion -- obviously he is able to shift the direction rapidly despite the huge bass end, which is heavier than any currently manufactured diatonic accordion!  In fact, I am certain that the bass end is heavier than both sides combined of a Castangari Handry.
-Andy

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: What makes heavy a heavy diatonic accordion
« Reply #31 on: December 10, 2010, 01:40:54 PM »

Model:Handles like

Handry:Rolls Ghost or Shadow
Benny: BMW 3 series
Panther: Mid '70s Chevy pickup
Pokerwork: MG Midget
Lilly: Lotus Elite
Tommy: Honda 2000

Based on my (limited) experience.
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: What makes heavy a heavy diatonic accordion
« Reply #32 on: December 10, 2010, 02:28:12 PM »

Model:Handles like

Handry:Rolls Ghost or Shadow
Benny: BMW 3 series
Panther: Mid '70s Chevy pickup
Pokerwork: MG Midget
Lilly: Lotus Elite
Tommy: Honda 2000

Based on my (limited) experience.


Well, the only vehicle on your list that I have first-hand experience of is an MG Midget - and that was a joy on twisty country lanes but a nightmare in wetor icy conditions; sounds ideal for Morris (or maybe that should be Garage Morris?)

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: What makes heavy a heavy diatonic accordion
« Reply #33 on: December 10, 2010, 03:21:30 PM »

the weight of the bass end
Very smart point; but, how this concept can be applied to the heavy left sides (80-bass, for example) of BCC# boxes? Most BCC# players I saw on you tube moves these heavy bass ends as if they were feather-stuffed.
When a tune is played in C on a BCC#, I guess the number of bellows-reversals are not less than on a G/C.

 
I don't think the weight of the bass end is that important, its much more down to how its handled.  The trick is to keep or move the bellows into as near closed position  as possible before any  rapid ins & outs are indulged in as trying to do these, on any size box, wi;th the bellows extended results in 'bellows waggle' & wasted energy. Try the run down in Harvest Home ON THE ROW with the bellows well extended & then with about 3 inches open & see the difference.

As to C on BCC# the number of bellows reversals can be varied between 6 and  2  depending on  the mood the driver is in!

george :D
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: What makes heavy a heavy diatonic accordion
« Reply #34 on: December 10, 2010, 03:46:58 PM »

@melodeon: Whereas  bombate reeds are supposed to offer better aerodynamic conditions according to Bernoullis Principle (one may, a bit boldly, compare it to the upper rounded side of an aircraft wing), tirate reeds have been filed in a certain way that allows a larger part of the reed to become active in creating sound (it. "tirato" = "stretched"). Filemarks can be seen  down and into  the foot of the reed, the upper edges are not rounded. These reeds are by many considered the non plus ultra. While the technique itself is not new, it lay dormant for many decades mainly due to the labour intensity involved.  One of Castelfidardos top reed makers has now included them in his range: these reeds are truely awesome, as I had the chance of finding out myself.
« Last Edit: December 11, 2010, 06:47:50 AM by diatonix »
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: What makes heavy a heavy diatonic accordion
« Reply #35 on: December 10, 2010, 04:06:18 PM »

the weight of the bass end
Very smart point; but, how this concept can be applied to the heavy left sides (80-bass, for example) of BCC# boxes? Most BCC# players I saw on you tube moves these heavy bass ends as if they were feather-stuffed.
When a tune is played in C on a BCC#, I guess the number of bellows-reversals are not less than on a G/C.


There are two points to make here. Firstly, and I don't know why, it is different when you are playing BCC#. You use the bass in such a different way that the extra weight and bulk really doesn't matter. If you were playing a G/D with a bass end that size then you might have problems, due to the different ways that the bellows are used.

Secondly, stradella bass systems are actually very weight efficient. They use a lot less reeds than a diatonic equivalent, due to reed sharing, which isn't possible on a bisonoric bass. Thus the reed blocks are smaller and lighter. The weight of the mechanism is I think fairly negligible, although I haven't taken mine out to weigh it! I think that a small and compact stradella bass end in a normal melodeon casing would not weigh significantly more than a diatonic one. Say 32 bass 8*4; counterbass, bass, major, thirdless, F#-F.

I personally think that bass end bulk makes more of a difference to how heavy an instrument is perceived to be than actual weight.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: What makes heavy a heavy diatonic accordion
« Reply #36 on: December 10, 2010, 04:35:39 PM »

Secondly, stradella bass systems are actually very weight efficient. They use a lot less reeds than a diatonic equivalent, due to reed sharing, which isn't possible on a bisonoric bass.
Errr.. I don't think this is entirely true! At least, not for Hohner diatonic boxes, which seem to share bass reeds. The famous 'stop the thirds' issue.
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: What makes heavy a heavy diatonic accordion
« Reply #37 on: December 10, 2010, 05:31:34 PM »

Lets consider a couple of examples.

A hohner two row 8 bass box contains 20 reedplates in the bass end, a 4 voice stradella bass contains 48 reeds,   so there will be a big weight gain there.

An the other hand a typical 12 bass Italian box will have 36 reed plates, and an 18 bass would have 54.

Conclusion:  8 bass boxes are always going to be lighter in the bass end than stradella, but as the number of bass buttons increases the number of reedplates soon matches or exceeds the stradella.   Of course the stradella mechanism is much more complex and is heavier than the simple lever system in a typical melodeon bass.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: What makes heavy a heavy diatonic accordion
« Reply #38 on: December 10, 2010, 05:49:23 PM »

Actually I've done some maths and you are quite right :P But as you get larger, the difference between stradella and diatonic becomes much less. This is for just bass obviously, as stradella is clearly at an advantage if you consider major, minor, dominant and diminished to be 4 separate chords.

EDIT: Theo got there before me.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: What makes heavy a heavy diatonic accordion
« Reply #39 on: December 10, 2010, 06:24:57 PM »

The one important thing that is missing in the standard Stradella bass is an open chord, tonic and fifth only.   In much traditional music the ambiguity of having the chord neither major nor minor can be quite important, and is one of the ways that insensitive piano accordion players can make themselves unpopular.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal