Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: A mano Bombate's?  (Read 13317 times)

0 Members and 1 Guest are viewing this topic.

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
A mano Bombate's?
« on: December 12, 2010, 01:08:46 AM »

Been doing a lot of research on reeds and just heard of the A Mano Bombatte's, but not a lot of info on them. Anyone who's used them notice a tonal difference between them and A mano's?  Response is reported to be much better.  What company('s) make them? 

I'm building myself a one row and may consider these.

Thanks,
Bryan

Andrew Culwell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 620
Re: A mano Bombate's?
« Reply #1 on: December 12, 2010, 01:24:50 AM »

I haven't heard anything about them.  Dancemaster has been selling them for a year or so.  You might contact them.
Logged
Hohner's, Paolo Soprani red 4 voice, Paddy Clancy Celtic

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: A mano Bombate's?
« Reply #2 on: December 12, 2010, 03:38:24 AM »

I intend to AJ.  I believe he has Voci Armoniche's.  Very little about these on the web.

Andrew Culwell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 620
Re: A mano Bombate's?
« Reply #3 on: December 12, 2010, 04:14:16 AM »

He was going to put them on the Hohner you see in my Profile pic, I went for Binci TaM instead due to price difference. 
Logged
Hohner's, Paolo Soprani red 4 voice, Paddy Clancy Celtic

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: A mano Bombate's?
« Reply #4 on: December 12, 2010, 06:46:28 AM »

Some info concerning A Mano Bombate and the even more exclusive A Mano Tirate  in an other thread: "What makes heavy etc." in Instrument Makes & Models
« Last Edit: December 12, 2010, 06:52:05 AM by diatonix »
Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: A mano Bombate's?
« Reply #5 on: December 12, 2010, 12:19:34 PM »

Yep, Diatonix, that was the thread that started me on my quest.  I can't find any other info on the tirates, and very little on the bombattes.  There was a thread or two on the Reyes forum also.

Santa Clause will be getting an odd request this year.

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: A mano Bombate's?
« Reply #6 on: December 12, 2010, 12:34:07 PM »

Information on a lot of accordion related production is pretty scant.

The reed makers have a large and very reliable market right on their doorstep so they don't really need to take the time and effort to chase orders from the relatively small one outside Castelfidardo. They also have no real rivals elsewhere in the world so they know people who want high quality accordion reeds are going to have to come to them.

I suspect the only way to really get any kind of in-depth information is to go to Castelfidardo, make appointments with them and talk face to face...ideally with a huge wad of Euros...

Andy Simpson, currently taking Italian lessons....
« Last Edit: December 12, 2010, 12:36:31 PM by Andy Simpson »
Logged

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: A mano Bombate's?
« Reply #7 on: December 12, 2010, 02:51:57 PM »

[...] go to Castelfidardo, make appointments with them [...]

I'm not sure that "appointments" translates into the local language...

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: A mano Bombate's?
« Reply #8 on: December 13, 2010, 01:04:03 AM »

Which makes it harder still... ;D

I certainly get the impression that they don't need to do the hard sell in Castelfidardo so business is very much on their terms and the onus seems to be on the buyer to make it worth their while.

Even if I'm totally wrong, it's certainly different from the way things are done in the anglophone world...
Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: A mano Bombate's?
« Reply #9 on: December 13, 2010, 01:50:47 AM »

My hope is to find a middle man to get some from, and I'd like to start with one set in mine to see what they sound like before I do too much investing.  Even if the response is better than Binci A Mano's, I'm still very curious as to the tone and actual sound. Pretty intriguing.

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: A mano Bombate's?
« Reply #10 on: December 13, 2010, 07:09:36 AM »

You are right, Andy, when it comes to chromatic reeds. But when talking about first class diatonic reeds the situation is very different. Few Italian makers put them into their diatonic instruments. Even Castagnari uses TAM with only very few exceptions. Top diatonic reed makers such as Binci and his few competitors depend largely on the foreign market.
« Last Edit: December 13, 2010, 07:17:17 AM by diatonix »
Logged

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: A mano Bombate's?
« Reply #11 on: December 13, 2010, 08:31:12 AM »

Hmm, that's interesting, it makes sense when I think about it.

Wherever their products are going, none of them seem to have to try too hard to attract business or have much need to advertise their wares and the customer has to do a bit of digging to find out what they need.
Logged

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: A mano Bombate's?
« Reply #12 on: December 13, 2010, 03:49:23 PM »

You are right, Andy, when it comes to chromatic reeds. But when talking about first class diatonic reeds the situation is very different. Few Italian makers put them into their diatonic instruments. Even Castagnari uses TAM with only very few exceptions. Top diatonic reed makers such as Binci and his few competitors depend largely on the foreign market.

And Binci, while offering several options, is basically making reeds that would be called TAM (or perhaps a mano?) by Voci Armoniche, right?
My impression is that the reeds typically used in high-end diatonics, i.e. Bincis and Antonelli/Salpa TAMs, are a compromise between loudness and responsiveness, and that they reflect the desires and needs of many diatonic players.  The more extreme a mano options like bombate etc might sacrifice the higher end of the volume range to an extent that most diatonic players would not desire. Is this correct?  One can tweak a bit more responsiveness, at the price of a bit of volume, by ordering longer-scale reeds from Binci or VA, without going all the way to a mano or even bombate.


 

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: A mano Bombate's?
« Reply #13 on: December 13, 2010, 05:05:44 PM »

A very important difference between TAM and AM consists of the fact that the raw material (steel) is fundamentally different. TAM reeds are punched out from steel plates (often already pre-tuned befor being cut), whereas AM reeds are made from long thin, already slightly bent strips of (usually Swedish) band steel. Its width corresponds  to that  of the reed foot, which as a consequence shows bluish edges on the sides. Usually the reeds are made as "Siamese" twins, sharing a long common foot which subsequently is cut in the middle (this is done by hand, small imperfections being another way of distinguishing AM from TAM). For many years, Binci has only had the latter type in his repertoire, so his reeds may justly be called AM (a mano).
I have recently  become familiar with even more sophisticated reeds (bombate and tirate) from another excellent Castelfidardan reed maker.  I don't have the necessary equipment to measure "loudness", "responsiveness" or "richness" nor do I want it. All good A mano reeds should be responsive, but my and many of my customers' impression is that by "upgrading" (I don't really like that term, given the fact that  Bincis' standard type of AM reeds are, inspite of casual issues, nothing but wonderful) you get an even richer sound, with all the effortless power associated with AM.
« Last Edit: December 13, 2010, 11:03:21 PM by diatonix »
Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: A mano Bombate's?
« Reply #14 on: December 13, 2010, 08:08:12 PM »

Diatonix, what is the difference between Bombatte and Tirade?

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: A mano Bombate's?
« Reply #15 on: December 13, 2010, 09:01:56 PM »

I cannot tell you much more than what I posted in my answer to Melodeon in the already mentioned thread ("what makes heavy etc.), reply #34. Basically, bombate ("rounded") reeds are supposed to offer optimal aerodynamic conditions. Tirate  ("stretched") reeds are said to have optimized the inherent sound producing potential of the steel  by grinding/filing it (and thus influencing its elasticity/stiffness) in a certain manner. An interesting conclusion which just crossed my mind is that theoretically it should make sense to make combined tirate/bombate reeds. Hmm, that's something I must ask my reed maker. On the other hand, let's not exaggerate...
Logged

Andrew Culwell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 620
Re: A mano Bombate's?
« Reply #16 on: December 13, 2010, 09:04:24 PM »

Since I haven't played a box with AM reeds I'm wondering is the response of these new reed types really any different than the TaM Binci's.  I would assume that the more voices you have in a box there is an incremental need for reed performance.  That said is there really that much performance difference between Binci TaM and AM and these Tirate Bombate reeds.  Enough to make a significant difference in performance and dynamics? My understanding is that the average boxplayer would be hard put to discern the difference between the TaM reeds and the AM reeds.  What does that say about Tirate and Bombate?
Logged
Hohner's, Paolo Soprani red 4 voice, Paddy Clancy Celtic

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: A mano Bombate's?
« Reply #17 on: December 13, 2010, 09:50:06 PM »

My understanding is that the average boxplayer would be hard put to discern the difference between the TaM reeds and the AM reeds.

I'm not sure that is true.  Most Cajun box players readily distinguish Bincis from Salpas, and the Salpas that were typically supplied for Cajun boxes were TAM, whereas according to the info above, Binci prof are basically AM.

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: A mano Bombate's?
« Reply #18 on: December 13, 2010, 10:42:49 PM »

@A.J.: Both types have been around for many years. It's more like that until not so long ago it was widely considered an absolute waste to put them into the simple, supposed to be cheap diatonic instruments.
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: A mano Bombate's?
« Reply #19 on: December 13, 2010, 11:22:48 PM »

All the old Paolo Sopranis that I have seen were never fitted with TAM or AM reeds at the factory.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal