Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Stripping the paint off a Pokerwork?  (Read 4708 times)

0 Members and 1 Guest are viewing this topic.

Noodle

  • Louder is better, right?
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 219
  • Occasionally actually helpful
Stripping the paint off a Pokerwork?
« on: December 12, 2010, 11:54:34 AM »

Right, I'm in the market for a box of my own. I have the option of doing lots of work to a tiny single voice Russian button accordion or buy a melodeon. I've decided I don't want a Hohner Erica (or anything with that hideous grille) and I really dislike the paintwork on a pokerwork. I'm also not overly fond of bare wood on a box. Classy? Perhaps, but not what I want. That leaves me with a narrow field of either cheapo grot-boxes or plush range Italian models as far as I can see. I rather fancy the look of a Dino Baffetti 82 and a Paolo Soprani Folk II.

However, those may be too expensive and thinking about it, give the glowing reviews pokerworks have as morris boxs (I play and dance in a border side) it may be ideal to raise the volume of the band. If I do end up with one, being the vanity stricken person I am, I'd want to strip the paint off as the pattern really doesn't appeal to my taste. How advisable is this, and is it a 'one man and his strip of sandpaper' job or should it be left to someone who'd know what he's doing?
Logged
Nottingham, UK.

Hohners: HA114 (C), HA114 (G)*, Liliput (C/F), Preciosa (C/F)*, 1040 (G), Imperial. Dino Baffetti Binci III (D/G), Self-made Pariselle 2.6 (G/C), Soberano (C/F), Nopka garmoshka (F#)*.

One day I'll get really good, like those really good players. One day.
*to be fixed

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Stripping the paint off a Pokerwork?
« Reply #1 on: December 12, 2010, 03:46:12 PM »

Strip all the hardware off and then apply a good thick coat of a proprietary brand of paint remover.
Scrape all that off and then sand and stain or whatever.
I've done it to a few Hohners and they look great.
Others here have veneered or painted. Have fun.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Stripping the paint off a Pokerwork?
« Reply #2 on: December 12, 2010, 07:39:13 PM »

I'm tempted to buy a cheap pokerwork and polish off all the gold using metal polish to end up with a very shiny all black box.
Haven't yet worked out how to get another box in the house without anyone noticing, though.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Stripping the paint off a Pokerwork?
« Reply #3 on: December 12, 2010, 08:44:49 PM »

If it helps, I sympathise with the pokerwork crisis :P I will never own one for that reason. Ericas are not too bad. What is your budget? For under a grand you can get a lovely restored Hohner from Theo or Mike or someone that may well be more cost-effective than going new.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Stripping the paint off a Pokerwork?
« Reply #4 on: December 12, 2010, 08:55:32 PM »

I am ashamed to admit I have never owned a Pokerwork.  I've had a couple of Ericas and I currently have two 4-stop 1-rows and a 4-bass 2-voice 1-row, but never a 2-row Pokerwork. And I call myself a morris musician!  Ah well.........

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Stripping the paint off a Pokerwork?
« Reply #5 on: December 12, 2010, 10:32:02 PM »

I'm tempted to buy a cheap pokerwork and polish off all the gold using metal polish to end up with a very shiny all black box.
Haven't yet worked out how to get another box in the house without anyone noticing, though.

Matt black paint and carbon fibre hardware, oh and an additional stop which switches in stealth mode  ;D

Failing that, let a friend look after an ordinary new box for a while and then call unexpectedly to return it to you* with many thanks for the loan while 'them indoors' are about, once you've got them questioning their own memories you can get away with blue murder to cover your own lapses.....

*My late pal up the lane, when returning from an expedition to a model engineering exhibition or similar, would often accidentally 'leave' a purchase in the car of his chauffeur to retrieve later, despite his other half knowing full well and happy that he was further equipping or restocking the workshop.  A couple of years after his departure I went with his wife to choose and bring back a new bandsaw, she was driving, as we got near to my gate I couldn't resist asking if she wanted to drop it off at mine and then sneak it home under cover of darkness as per tradition, it was the first time I had heard her really laugh since she lost him, some of lifes little cameos are priceless.

Richard - about to watch the Clog dancing proggie
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Stripping the paint off a Pokerwork?
« Reply #6 on: December 12, 2010, 11:12:02 PM »

I think Pokerworks look great in pastel colours, perhaps you could use some of that coloured Ronseal, so as to show the woodgrain through the stain?  Probably best to try it out on the back of the box first.

Rob
Logged

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Stripping the paint off a Pokerwork?
« Reply #7 on: December 13, 2010, 10:42:59 AM »

Pastel like this?
Logged
Tuner/repairer, now retired.

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Stripping the paint off a Pokerwork?
« Reply #8 on: December 13, 2010, 10:44:20 AM »

Should have also posted the "before" shot...

Actually the front as shown was probably the least worn paintwork.
« Last Edit: December 13, 2010, 10:47:00 AM by Malcolm Clapp »
Logged
Tuner/repairer, now retired.

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Stripping the paint off a Pokerwork?
« Reply #9 on: December 13, 2010, 10:51:57 AM »

Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Stripping the paint off a Pokerwork?
« Reply #10 on: December 13, 2010, 11:47:30 AM »

Pastel like this?
Is that a replacement bellows or did you work some magic on it?
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Stripping the paint off a Pokerwork?
« Reply #11 on: December 13, 2010, 08:33:25 PM »

The great thing with bellows is that you can get all manner of effects just by retaping them!

Rob.
Logged

Noodle

  • Louder is better, right?
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 219
  • Occasionally actually helpful
Re: Stripping the paint off a Pokerwork?
« Reply #12 on: December 14, 2010, 12:57:43 AM »

If it helps, I sympathise with the pokerwork crisis :P I will never own one for that reason. Ericas are not too bad. What is your budget? For under a grand you can get a lovely restored Hohner from Theo or Mike or someone that may well be more cost-effective than going new.
I've had a look at Theo's collection, and I'm not sure there's much on there I want. I'm after a B/C box, despite drooling over the Dino Bafetti he has. I also can't fall in love with the Hohner grille, so an Erica/Trichord/Double Ray is off my wishlist whilst wiping out a great deal of good, affordable models. Who's Mike? My budget can probably stretch to £800 at a push, at least for now.

As for colour... What are blackboards made of? Failing that, I might settle on a lairy bright orange or lime green

Strip all the hardware off and then apply a good thick coat of a proprietary brand of paint remover.
Scrape all that off and then sand and stain or whatever.
I've done it to a few Hohners and they look great.
Others here have veneered or painted. Have fun.

Thanks Rees
Logged
Nottingham, UK.

Hohners: HA114 (C), HA114 (G)*, Liliput (C/F), Preciosa (C/F)*, 1040 (G), Imperial. Dino Baffetti Binci III (D/G), Self-made Pariselle 2.6 (G/C), Soberano (C/F), Nopka garmoshka (F#)*.

One day I'll get really good, like those really good players. One day.
*to be fixed

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Stripping the paint off a Pokerwork?
« Reply #13 on: December 14, 2010, 01:47:59 AM »

If it helps, I sympathise with the pokerwork crisis :P I will never own one for that reason. Ericas are not too bad. What is your budget? For under a grand you can get a lovely restored Hohner from Theo or Mike or someone that may well be more cost-effective than going new.
I've had a look at Theo's collection, and I'm not sure there's much on there I want. I'm after a B/C box, despite drooling over the Dino Bafetti he has. I also can't fall in love with the Hohner grille, so an Erica/Trichord/Double Ray is off my wishlist whilst wiping out a great deal of good, affordable models. Who's Mike? My budget can probably stretch to £800 at a push, at least for now.

Do you mean the curved, Erica grille or the older style one? The older style is I think the same as the pokerwork grille, although on the Corso models (wading into unknown territory here) they have a curved thing, as on tallship's thread.

Mike is Mike Rowbotham: http://www.michaelrowbotham.eclipse.co.uk/
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Noodle

  • Louder is better, right?
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 219
  • Occasionally actually helpful
Re: Stripping the paint off a Pokerwork?
« Reply #14 on: December 14, 2010, 03:03:42 AM »

If it helps, I sympathise with the pokerwork crisis :P I will never own one for that reason. Ericas are not too bad. What is your budget? For under a grand you can get a lovely restored Hohner from Theo or Mike or someone that may well be more cost-effective than going new.
I've had a look at Theo's collection, and I'm not sure there's much on there I want. I'm after a B/C box, despite drooling over the Dino Bafetti he has. I also can't fall in love with the Hohner grille, so an Erica/Trichord/Double Ray is off my wishlist whilst wiping out a great deal of good, affordable models. Who's Mike? My budget can probably stretch to £800 at a push, at least for now.

Do you mean the curved, Erica grille or the older style one? The older style is I think the same as the pokerwork grille, although on the Corso models (wading into unknown territory here) they have a curved thing, as on tallship's thread.

Mike is Mike Rowbotham: http://www.michaelrowbotham.eclipse.co.uk/
I'm on about the curved grille


I just really dislike it. I can get on with the pokerwork grille though
Logged
Nottingham, UK.

Hohners: HA114 (C), HA114 (G)*, Liliput (C/F), Preciosa (C/F)*, 1040 (G), Imperial. Dino Baffetti Binci III (D/G), Self-made Pariselle 2.6 (G/C), Soberano (C/F), Nopka garmoshka (F#)*.

One day I'll get really good, like those really good players. One day.
*to be fixed

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Stripping the paint off a Pokerwork?
« Reply #15 on: December 14, 2010, 10:34:00 AM »

I have two Double Ray B/C for sale, They are from the 1950s and both have wooden keyboards.
The blue/grey celluloid is £300 and the black one is £400.

I'm going on holiday today for a week but will probably still be on-line.
« Last Edit: December 14, 2010, 10:38:15 AM by Rees »
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Malcolm

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 253
Re: Stripping the paint off a Pokerwork?
« Reply #16 on: December 16, 2010, 10:07:39 AM »

I bought my first melodeon, a D/G Hohner Pokerwork, back in 1972.  It stayed in factory livery for a while until, on a whim, I decided to remove the black and gold finish and the slight embossing of the pattern.  I did this using a 1" chisel as a scaper which took a while but left a clean, flat surface which I then varnished.  It stayed that way for a few years until, on another whim, I painted the whole thing black and made a new grille out of plywood cut in an 'Art Deco' sunrise with red cloth backing and that's how it has stayed -
Logged
Hohner Pokerwork D/G (My first box). Hohner Pokerwork C/F (Thanks to Martyn White). Hohner 4 Stops in G (My Minehead Box), D & C. Hohner Erikas in D/G & Bb/Eb (Thanks to Mike Rowbottom & Martyn White). Saltarelle Berry D/G (The token Costalotti) and a G/C Hohner Corso (wetter than an English summer)

Malcolm

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 253
Re: Stripping the paint off a Pokerwork?
« Reply #17 on: December 16, 2010, 10:09:03 AM »

Hmm.  Tried to insert a link so here goes again - http://www.flickr.com/photos/27392373@N05/5265947476/
Logged
Hohner Pokerwork D/G (My first box). Hohner Pokerwork C/F (Thanks to Martyn White). Hohner 4 Stops in G (My Minehead Box), D & C. Hohner Erikas in D/G & Bb/Eb (Thanks to Mike Rowbottom & Martyn White). Saltarelle Berry D/G (The token Costalotti) and a G/C Hohner Corso (wetter than an English summer)
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal