Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Bellows repair material  (Read 13243 times)

0 Members and 1 Guest are viewing this topic.

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Bellows repair material
« on: December 15, 2010, 05:27:16 PM »

I just found this fine leather product at Talas.

http://apps.webcreate.com/ecom/catalog/product_specific.cfm?ClientID=15&ProductID=20728

Goldbeater's skin. It's very thin, tough, and might be just the ticket for sealing holes in bellows gaskets. Has anyone ever used this product?

My old Hohner ADG bellows has holes in many of the bellows gaskets and this seems like the right kind of product to do the repairs without adding bulk.

Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Bellows repair material
« Reply #1 on: December 15, 2010, 05:40:48 PM »

Why not just replace the gaskets with gasket tape? Unless it's something else you mean by gaskets?

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Bellows repair material
« Reply #2 on: December 15, 2010, 05:53:40 PM »

Hmm, sounds like I have my nomenclature wrong again.

What I want to do is repair holes in the leather corner diamonds on the bellows. For some reason I keep thinking of them as gaskets. Sorry.

Bellows gaskets are the strips of material that are used to seal the joint between the bellows frames and the treble and bass ends.



Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Bellows repair material
« Reply #3 on: December 15, 2010, 07:15:55 PM »

What I want to do is repair holes in the leather corner diamonds on the bellows. For some reason I keep thinking of them as gaskets. Sorry.
Charlie Marshall's your man.....
Leather bellows corners.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

HallelujahAl

  • Guest
Re: Bellows repair material
« Reply #4 on: December 15, 2010, 07:25:14 PM »

Quote
Charlie Marshall's your man.....
Leather bellows corners.
AY! He's the fella - though I've used the stuff from talas - ve. similar to the same super-thin plain leather that David Leese also sells on his concertina-spares wbsite.
AL
Logged

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Bellows repair material
« Reply #5 on: December 16, 2010, 01:42:41 AM »

Quote
Charlie Marshall's your man.....
Leather bellows corners.
AY! He's the fella - though I've used the stuff from talas - ve. similar to the same super-thin plain leather that David Leese also sells on his concertina-spares wbsite.
AL

Am I correct in assuming these are for patching the corners of the bellows from within? What type of glue is best?

 

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Bellows repair material
« Reply #6 on: December 16, 2010, 06:12:15 AM »

Some of the diamonds in my bellows have small holes that need to be repaired. I'm wondering if it's better to completely replace the diamond or patch the hole? I was thinking of using the material from Talas as a patch material since it is extremely thin and shouldn't create a bulky repair.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bellows repair material
« Reply #7 on: December 16, 2010, 08:27:20 AM »

In my humble opinion the presence of more than one or possibly two damaged gussets is grounds for fitting new bellows.  Patching from inside is the simplest to do, but the patching material should be thin (less than .5mm) and it must also be airtight, not all leathers are.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Bellows repair material
« Reply #8 on: December 16, 2010, 12:42:06 PM »

I'm looking at repairing a bellows on a rather more hexagonal free reed instrument, which has several leaking corners and really doesn't warrant new bellows (financially).

I'm trying to decide between some 0.2mm leather from David Leese or some of Charlie's zephyr stuff. Any suggestions or better ideas - or should I just ask on t'other forum?

Somebody has tried external repairs in the past and they're 'orrible. And leaky.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Bellows repair material
« Reply #9 on: December 16, 2010, 12:58:42 PM »

I'm looking at repairing a bellows on a rather more hexagonal free reed instrument, which has several leaking corners and really doesn't warrant new bellows (financially).

I'm trying to decide between some 0.2mm leather from David Leese or some of Charlie's zephyr stuff. Any suggestions or better ideas - or should I just ask on t'other forum?

Somebody has tried external repairs in the past and they're 'orrible. And leaky.

HalelujahAl is our resident concertina bellows expert so if he does not see this you may like to pm him.

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Bellows repair material
« Reply #10 on: December 16, 2010, 01:34:15 PM »

I just found this fine leather product at Talas.

Goldbeater's skin. It's very thin, tough, and might be just the ticket for sealing holes in bellows gaskets. Has anyone ever used this product?


Don't know about its use on bellows but having just read a book on the development of the Zeppelin, this is what they made the gas bags from, which (mostly) kept the hydrogen in.

Richard
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

HallelujahAl

  • Guest
Re: Bellows repair material
« Reply #11 on: December 16, 2010, 01:57:03 PM »

Quote
I'm looking at repairing a bellows on a rather more hexagonal free reed instrument, which has several leaking corners and really doesn't warrant new bellows (financially).

I'm trying to decide between some 0.2mm leather from David Leese or some of Charlie's zephyr stuff. Any suggestions or better ideas - or should I just ask on t'other forum?

Somebody has tried external repairs in the past and they're 'orrible. And leaky
.
Sounds like they just need a re-bind - as long as the leaks are only on the corners. Wouldn't bother with either Dave's or Charlie's Zephyr (tis the same material essentially). Would ensure that the leaks are simply on the corners by taking one end off and removing reed pan and shine a torch inside or sticking a shing lightbulb inside it, marking with chalk the places where it's leaking from. Then purchase a run of leather from Dave Leese (usually 3/4" black skived both on both edges on one side) and glue the bind around after end-skiving etc. I use a number of different leather glues - but Tandy's 'Leather Weld' is a good product, don't even think about trying to use pva as it is not flexible and will fail. That'll last you a few years. You can also tidy it up by then sticking on some new bellows papers if you want. For a nice finish obviously it makes sense to do all the bellows folds, and make sure you start and finish the skived ends on what is for you the 'bottom' set of bellows folds. PM me if you want more detail/info. And if you can't be bothered then feel free to send the bellows to me and I'll do a rebind for you as long as you buy the leather and make a donation to The Salvation Army  ;D
Regards, AL
Logged

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Bellows repair material
« Reply #12 on: December 16, 2010, 07:33:16 PM »

In my humble opinion the presence of more than one or possibly two damaged gussets is grounds for fitting new bellows.  Patching from inside is the simplest to do, but the patching material should be thin (less than .5mm) and it must also be airtight, not all leathers are.


I need to patch for the time being. I have some chamois and can take the thinnest portion of the hide for patching, if you think that will work. The Presswood only needs one patch though I will need to make new bellows for the ADG when I get to fixing it up.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bellows repair material
« Reply #13 on: December 16, 2010, 11:09:17 PM »

Chamois is no good for gussets,  much too porous. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Bellows repair material
« Reply #14 on: December 16, 2010, 11:22:52 PM »

Quote
Sounds like they just need a re-bind - as long as the leaks are only on the corners.

Sorry, they are on the inside (bottom) corners - the easy ones have been re-taped! The leather seems very dry at these points.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bellows repair material
« Reply #15 on: December 16, 2010, 11:28:58 PM »

Are we  talking about concertina or melodeon bellows here?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Bellows repair material
« Reply #16 on: December 16, 2010, 11:37:57 PM »

In this instance, Concertina.
I was wondering about moving the topic to CNET but it seems to overlap pretty well with melodeon questions - unless there'a a fundamental difference other than size?
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Bellows repair material
« Reply #17 on: December 16, 2010, 11:40:04 PM »

I am talking about melodeon gussets.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bellows repair material
« Reply #18 on: December 16, 2010, 11:42:41 PM »

In this instance, Concertina.
I was wondering about moving the topic to CNET but it seems to overlap pretty well with melodeon questions - unless there'a a fundamental difference other than size?

There are considerable differences, and its quite confusing for me (I don't know about others) to have the two topics mixed up like this.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bellows repair material
« Reply #19 on: December 16, 2010, 11:46:36 PM »

I am talking about melodeon gussets.

Right

Well chamois is still too porous!  In general either cow, calf or goat leathers are sufficiently airtight, but you still need to find something that is sufficiently thin and flexible.  Some clothing leathers are suitable,  glove leather is particularly good, but you won't get many gusset sized pieces free of stitching out of a pair of gloves.  The binding leather sold by David Leese would be good.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal