Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Mini Melodion  (Read 1425 times)

0 Members and 1 Guest are viewing this topic.

ubendum

  • New Starter
  • Offline Offline
  • Posts: 2
Mini Melodion
« on: January 04, 2011, 11:35:22 AM »

Has anyone ever tried to use harmonica reed blocks to make a mini melodion?
Looking at the tuning charts it seems you would only need to retune the third lowest reed, and to discard the two very lowest reeds altogether to get a good eight button set up with a second button start.
Logged

TomB-R

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 598
Re: Mini Melodion
« Reply #1 on: January 04, 2011, 05:25:59 PM »

Well.....!

I think one prob is going to be that the reeds are just so closely spaced, but hey, extended tapering reed chambers so that by the time you get to the action board there's enough space for reasonable sized pallets?

A while back someone gave me a little German concertina, 5 3/8" ATF.  The reed plates look quite like harmonica plates, but they're still about three times the spacing.
Logged

ubendum

  • New Starter
  • Offline Offline
  • Posts: 2
Re: Mini Melodion
« Reply #2 on: January 04, 2011, 06:33:25 PM »

Yes, I have an old concertina with reeds that look like that. That is what started me thinking, but no point reinventing the wheel if someone had done it already, and solved the problems involved.

Many years ago my physics teacher had a notice in his room which read "Please try to listen, life is too short to learn from your own mistakes." I have had many occasions to wish I had listened since then!
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal