Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: Faceplate(soundboard) holes  (Read 11487 times)

0 Members and 1 Guest are viewing this topic.

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Faceplate(soundboard) holes
« Reply #20 on: January 06, 2011, 01:50:13 PM »

He he, yep, Theo, but that's where I'm at.  And my mind is constantly going "what if".  Sometimes I  have no choice but to experiment, which is fun in itself.  I was just wondering if anyone had experience with both enough to say there are definite differences.  There's so many little things with these contraptions that make a difference in the sound, all affected by untold variables, not the least of which is type of music along with personal preference.  Off to the drawing board. :-\

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Faceplate(soundboard) holes
« Reply #21 on: January 06, 2011, 02:20:37 PM »

  Off to the drawing board. :-\

By the time you have built 20 of them you might be near to answering part of your own question!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Faceplate(soundboard) holes
« Reply #22 on: January 06, 2011, 04:36:43 PM »

Simplicity is a very complex thing...
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Faceplate(soundboard) holes
« Reply #23 on: January 06, 2011, 04:48:48 PM »

@ blafleur: I make mine 10mmx11mm or 10mmX10mm, maybe a thought smaller when there are register slides to worry about.
Drawing: when using a bench drill one doesn't need to draw the holes or their centers. Before i got computerized i used to make very accurate distance pieces, not more than 10 or 12 of them. One only has to decide where to make the first hole, the remaining will be placed automatically, fast and accurately. No thinking involved.
« Last Edit: January 06, 2011, 05:31:39 PM by diatonix »
Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Faceplate(soundboard) holes
« Reply #24 on: January 06, 2011, 05:22:29 PM »

Maybe, Theo, but I'm guessing that after 20 I'll just have more things to wonder about. 

Thank you Diatonix.  For me, less thinking is usually better.  Right now I use a milling machine. Very accurate.  I wouldn't recommend getting one for this purpose, just happen to have one and much easier for this purpose than a drill press.  I also have a mortising bit, so may try the square holes on a future box.  Once my curiosity get up, I'm not happy till I try it.

Good one, Quebecois, and some of us are more efficient at over complicating simple things than others.

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Faceplate(soundboard) holes
« Reply #25 on: January 06, 2011, 06:10:50 PM »

You could try mocking up a box (or half a box)with a removable soundplate and limited action to test, that way you can control more variables. Not sure how practical that would be though.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Faceplate(soundboard) holes
« Reply #26 on: January 06, 2011, 08:46:13 PM »

I've considered that Ukebert, and may be the only way to have actual comparison since everything else would remain the same.  It's funny how a number of accordions of same materials could be made, and there would be some variation in sound.  One day......

The daunting part of wanting to "experiment" when it comes to something like an accordion is the amount of time it would take to do it right, when just building one is pretty daunting in itself.  Making one accordion one way, then making another different one to test an idea changes too many variables to make it a true test.

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Faceplate(soundboard) holes
« Reply #27 on: January 08, 2011, 07:01:41 PM »

I know little about fluid dynamics (of the non-alcoholic variety), but was pondering this very question (as one does) last night and wondering why a box with a substantially square cutout for the reed and valve followed it up with a round hole and pad.
It seemed to me that a squared hole would allow a more direct and "cleaner" air flow with less turbulence which would probably affect both tone and reed start-up. However, having reached the end of my knowledge of the physics, it did occur to me that round holes (and pads) are much cheaper and easier to come by, and lighter. Well, the pads could be lighter...
Punching rectangular holes in metal is probably as easy as making round ones, but not in wood. As discussed above...

Following from the above, I'm not sure I'd bother to file the holes square into the corners. Round corners might be less inclined to crack.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Faceplate(soundboard) holes
« Reply #28 on: January 08, 2011, 07:10:41 PM »

it did occur to me that round holes (and pads) are much cheaper


 why a box with a substantially square cutout for the reed and valve followed it up with a round hole and pad.

[/quote]

The hole in the reedblock and the hole in the baseboard are virtually always the same shape, either both round or both square, for this very reason.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Faceplate(soundboard) holes
« Reply #29 on: January 08, 2011, 10:01:52 PM »

Let's not forget that the thickness of the faceplate is, from an acoustic point of view, equally influential. Thick plates absorb/block more sound than thin ones. That's why  relatively thin faceplates with relatively large (square) openings are preferrable. Better still if  the reed block is glued straight on to the faceplate: it will give the box that extra punch (especially with decent reeds).  Reed block bottoms and gaskets in diatonic instruments are, in my opinion, quite often unnecessary.
« Last Edit: January 08, 2011, 10:27:12 PM by diatonix »
Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Faceplate(soundboard) holes
« Reply #30 on: January 09, 2011, 05:15:41 AM »

I think larger holes are better to a point, but there is a point they are too big and it's using to much air. 

Talking about faceplates glued to faceplates, my first big project was I removed the reed blocks, backing plate, and slides out of a Hohner 114, made new reed blocks, and mounted directly to the face plate.  Even changed it from a 4 up configuration to a 2 up 2 down.  It made it much louder and also changed the tone.   I later made a new accordion and also mounted the reed blocks directly to the faceplate, and it had that same tone, kind of a brashness.  Sure makes it a pain to tune.

Speaking of faceplates, I'll start a new thread....

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Faceplate(soundboard) holes
« Reply #31 on: January 09, 2011, 06:50:47 AM »

@blafleur: This is hardly the case. The reeds alone (unless there are other leaks)  determine the air flow. The only concern with large openings would be relatively large and  heavy pallets.
Providing that all reeds are accessible, tuning shouldn't be an issue. Neither is waxing, depending on the technique.
Now I have to leave and dig out my car from under the snow, if I can  find it.
« Last Edit: January 09, 2011, 06:54:21 AM by diatonix »
Logged

old geezer

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 241
  • Hohner Melodeon
Re: Faceplate(soundboard) holes
« Reply #32 on: January 09, 2011, 06:51:42 AM »

I removed the reed blocks, backing plate, and slides out of a Hohner 114, made new reed blocks, and mounted directly to the face plate.  Even changed it from a 4 up configuration to a 2 up 2 down.  It made it much louder and also changed the tone.
please share, how you removed the original reed blocks.
what is the purpose of your 2 up / 2 down, as to the original LMMH all/or some?

 Sure makes it a pain to tune.
               also, they're a real bugga to wax

I'm interested in altering a 4 stop into 2 keys of MM, and adding a stop to the bass end for the corresponding bass and cords
2 stops up, 3 stops down = key of G; 3 stops up & 2 down = key of D
these HA114's have an appeal of there own, (and sometimes size does matter  :o)
Do you have a favorite melodeon?  ???
it has been asked before........
 
Logged
Jack Murphy    beyond the black stump

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Faceplate(soundboard) holes
« Reply #33 on: January 09, 2011, 08:30:39 AM »

Earlier in the discussion, I mentioned seeing square holes in examples of old German one-row accordions. This Beaver carcass currently on Ebay has square holes:

http://cgi.ebay.com/VINTAGE-BEAVER-BRAND-ACCORDION-/160527391925

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Faceplate(soundboard) holes
« Reply #34 on: January 09, 2011, 01:54:09 PM »

 Old Geezer, I just chiseled them out, after knocking the bulk out with a hammer.  Removing the backing plate was a little harder. I used the 2 up 2 down to see if there was going to be a difference in tone or volume, there was.  Not sure why blocks laying down increase volume, but they seem to.  Also makes it easier to tune blocks that are not removable as opposed to trying to get at those reeds facing each other in a double standup configuration.  The other issue was using the 2 up 2 down I had to redo 2 of the rows of faceplate holes.  So I layed a thin veneer on the backside of the faceplate first, then drilled holes where I needed them.  The old holes remained as closed off slots, but were covered by the pallets.

Do I have a favorite?  Compared to many folks on this forum I have a very limited experience with accordions.  Other than the 114, I've only had access to other Cajun made accordions.  I guess I'll have to say my favorite is mine, for fear of offending it's builder. ;D

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Faceplate(soundboard) holes
« Reply #35 on: January 09, 2011, 02:09:58 PM »

@blafleur: This is hardly the case. The reeds alone (unless there are other leaks)  determine the air flow. The only concern with large openings would be relatively large and  heavy pallets.
Providing that all reeds are accessible, tuning shouldn't be an issue. Neither is waxing, depending on the technique.
Now I have to leave and dig out my car from under the snow, if I can  find it.

Tuning is a pain only because without slides you can't shut off 3 banks to work on one row.  I use tape to cover the other 3 rows, not a big deal, but not as easy as slides.  I also like to compare one row against another, again much easier with slides.

I don't think I agree that only reeds determine air flow.  It seems to me that there is a combination of air flow and pressure build up in the reed block chamber, and there is a sweet spot in the combination.  As I said earlier, I experimented to try to find optimum size by starting small and gradually drilling out the faceplate holes.  The sound got better and louder, then at a certain point it was using noticeably more air. Not a conclusive or scientific experiment, I know, but it makes sense in my feeble mind. There is lots of head scratching for me on this stuff and a lot of it doesn't make sense.

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Faceplate(soundboard) holes
« Reply #36 on: January 09, 2011, 03:38:47 PM »

@blafleur: This is hardly the case. The reeds alone (unless there are other leaks)  determine the air flow. The only concern with large openings would be relatively large and  heavy pallets.
Providing that all reeds are accessible, tuning shouldn't be an issue. Neither is waxing, depending on the technique.
Now I have to leave and dig out my car from under the snow, if I can  find it.

Surely there comes a point where the air going into the chamber is too much for the reed and will choke it? Or is that a chamber geometry problem?
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: Faceplate(soundboard) holes
« Reply #37 on: January 09, 2011, 04:10:05 PM »

Surely there comes a point where the air going into the chamber is too much for the reed and will choke it? Or is that a chamber geometry problem?

I think that has more to do with the pressure applied by the bellows.

My experience tells me that the chamber should be as small as possible to get the brightest sound. Just long and deep enough to allow the reed and valve to move freely. I've worked on boxes where the chamber was WAY to big for the reed in place, and the response was not an issue. A strip of wood was applied at the base of the block to accept the smaller reed. The sound was, however, a bit too rounded to my taste. When blocking the chamber from top and thus reducing the chamber volume, the sound appeared brighter.
Logged

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Faceplate(soundboard) holes
« Reply #38 on: January 09, 2011, 05:15:23 PM »

@lars: what you've pointed out is very true when dealing with smaller reeds, say the last 4 to 6 in a row. My experience teaches me  that larger reeds benefit from more spacious (i.e. deeper, but not longer than necessary) chambers, probably because they allow their valves to fully open.
Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Faceplate(soundboard) holes
« Reply #39 on: January 09, 2011, 06:38:16 PM »

I've experimented with chamber size some by adding pieces of wood to build up the inside and make the chamber more shallow.  Again, I  think there is a sweet spot.  Too much chamber and you lose volume and some tone, then at a certain point when making it smaller, it began to sound choked and muffled.  I also tried building it up unevenly making up for the fact that the push reed is sitting higher than the pull reed.  It affected the smaller reeds without valves more positively that the bigger reeds. This time I've tried making the chambers slightly narrower, as narrow as I can get away with, even trimming valves in the chamber a little so they would clear the sides, and making slightly deeper chamber, shooting for a chamber that was roughly the same size in area (guesstimating), but not as shallow, hoping this made air movement more efficient.  In case it isn't obvious, I have no scientific or engineering background, this is all just the mindless meandering of a guy with some time and a shop.

Waiting on reeds, I'll know in another month or two....
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal