Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Reed orientation for tremolo tuning  (Read 5068 times)

0 Members and 1 Guest are viewing this topic.

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Reed orientation for tremolo tuning
« on: January 06, 2011, 12:55:56 AM »

I'll be waxing the reeds onto the blocks on my Erica sometime in the next week, once they arrive. I plan to finish tune them to have a fair amount of tremolo - close to a Hohner.

I realize that one of the two reed plates for each note is tuned to concert pitch and the other will be slightly higher or lower depending on the original tuning and depending on Dedic vs. other systems. Is there a tradition/standard for which side of the reed block has the reed that is tuned to concert pitch? Seems like it would make tuning easier if you knew which reed was tuned to pitch and which was not rather than finding out by trial and error for every pair of reeds that you tune.  I'm trying to plan ahead for some of the work I'll be doing.

Ed
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Reed orientation for tremolo tuning
« Reply #1 on: January 06, 2011, 01:08:54 AM »

I presume that your box will have one side concert and the other side +, if not then all your reeds have become rearranged and good luck sorting them out :P Boxes that have been worked on in the bast often have little pencil marks to let the repairer know which is which, so on the basis of that I'm presuming not :(
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Reed orientation for tremolo tuning
« Reply #2 on: January 06, 2011, 08:35:01 AM »

As Ukebert said, as long as you have not shuffled the reeds when they were off the block one side will be at or near concert and the other will be tuned sharp. So it is just a matter of using your tuning rig to find which is which.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Reed orientation for tremolo tuning
« Reply #3 on: January 06, 2011, 08:47:55 AM »

See the attached photo for a view of the treble reed blocks on my 1970s C/F Erica. The 'as received' layout for the reeds on the blocks was for the at-pitch (M) reeds to be mounted on the sides of the reed blocks furthest away from the keyboard, and the sharp-pitch (M+) reeds mounted on the sides nearest the keyboard. I think this is Hohner convention, but I don't know for certain.

I kept to this layout when I retuned the instrument to Viennese 'Dedic' tuning, so the M- reeds are on the sides of the blocks uppermost in the photo and the M+ reeds lowermost.

Hope this helps.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Reed orientation for tremolo tuning
« Reply #4 on: January 06, 2011, 08:58:28 AM »

A further thought....

If you are receiving new reeds from a supplier, both pairs of reeds may be tuned to the same pitch by default, so it is then up to the 'user' to decide which one to tune M and which to M+.

Furthermore, I have a feeling that new reeds are supplied tuned slightly sharp anyway, on the basis that it is easier/less damaging to flatten reeds rather than to sharpen them. But I may be talking nonsense here. Theo or Rees may be able to advise with much greater authority  ;)
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed orientation for tremolo tuning
« Reply #5 on: January 06, 2011, 09:07:13 AM »

If you are receiving new reeds from a supplier, both pairs of reeds may be tuned to the same pitch by default,

Yes usually tuned approximately 10 cents sharp of the nominal pitch, unless you specified something different.

If you are fitting Italian reeds you should also expect to do some woodwork.  Italian reeds are usually longer than Hohner reeds of the same pitch, so its sometimes necessary to carve out some wood from the reed chamber to leave enough room for the reed and the valve to swing without obstruction.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Reed orientation for tremolo tuning
« Reply #6 on: January 06, 2011, 04:06:57 PM »

Couldn't afford Italian reeds.

I bought a "used" set  of Weltmeister reeds in D/G from Irish Dancemaster. They were pulled from a new instrument (405 model) when the buyer decided he wanted a different tuning so the reeds are brand new. I don't know if I'll need to make modifications to the reed blocks yet.

Thanks for the tips about M and M+ reed placement Steve. I suspect that the reeds will be tuned M and M+ or M- since they were already in a working instrument - anyone know the stock Weltmeister tuning? Can't wait to install them and get a working D/G instrument!

There's little else to do for the instrument, new pallet leathers and some minor bellows repair.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed orientation for tremolo tuning
« Reply #7 on: January 06, 2011, 04:11:35 PM »

anyone know the stock Weltmeister tuning?

Similar to Hohner, or perhaps a little less tremolo.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Reed orientation for tremolo tuning
« Reply #8 on: January 06, 2011, 04:16:01 PM »

See the attached photo for a view of the treble reed blocks on my 1970s C/F Erica. The 'as received' layout for the reeds on the blocks was for the at-pitch (M) reeds to be mounted on the sides of the reed blocks furthest away from the keyboard, and the sharp-pitch (M+) reeds mounted on the sides nearest the keyboard. I think this is Hohner convention, but I don't know for certain.

I am half way through tuning an Erica and mine is the other way round, ie the concert side is the one nearest the keyboard, this is the same as the two pokerworks I have worked on recently?? Make what you will have that  ;)

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Reed orientation for tremolo tuning
« Reply #9 on: January 06, 2011, 04:50:04 PM »

See the attached photo for a view of the treble reed blocks on my 1970s C/F Erica. The 'as received' layout for the reeds on the blocks was for the at-pitch (M) reeds to be mounted on the sides of the reed blocks furthest away from the keyboard, and the sharp-pitch (M+) reeds mounted on the sides nearest the keyboard. I think this is Hohner convention, but I don't know for certain.

I am half way through tuning an Erica and mine is the other way round, ie the concert side is the one nearest the keyboard, this is the same as the two pokerworks I have worked on recently?? Make what you will have that  ;)

Perhaps the answer is to mark which side is tuned concert pitch so that the next person doing a tuning will know where to start. Maybe there isn't an industry wide convention.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Reed orientation for tremolo tuning
« Reply #10 on: January 06, 2011, 04:59:34 PM »

Perhaps the answer is to mark which side is tuned concert pitch so that the next person doing a tuning will know where to start. Maybe there isn't an industry wide convention.

I always mark the blocks but not for the benefit of others but due to my limited attention span  ;D

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Reed orientation for tremolo tuning
« Reply #11 on: January 06, 2011, 05:12:55 PM »

Perhaps the answer is to mark which side is tuned concert pitch so that the next person doing a tuning will know where to start. Maybe there isn't an industry wide convention.

I always mark the blocks but not for the benefit of others but due to my limited attention span  ;D
Me too!  ;D
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Reed orientation for tremolo tuning
« Reply #12 on: January 06, 2011, 05:32:11 PM »

Perhaps the answer is to mark which side is tuned concert pitch so that the next person doing a tuning will know where to start. Maybe there isn't an industry wide convention.

I always mark the blocks but not for the benefit of others but due to my limited attention span  ;D
Me too!  ;D

I know I'll be the next one to work on tuning and, my age being what it is, I'll forget which side is which.  ;D
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed orientation for tremolo tuning
« Reply #13 on: January 06, 2011, 05:46:06 PM »

Any competent tuner will be able to work out which is which in a couple of seconds,  so I wouldn't worry which way you do it.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Reed orientation for tremolo tuning
« Reply #14 on: January 06, 2011, 05:49:00 PM »

Any competent tuner will be able to work out which is which in a couple of seconds,  so I wouldn't worry which way you do it.

The clue is in the "competent" bit.  ;D

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Reed orientation for tremolo tuning
« Reply #15 on: January 06, 2011, 05:51:17 PM »


The clue is in the "competent" bit.  ;D

Exactly! LOL
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Reed orientation for tremolo tuning
« Reply #16 on: January 06, 2011, 06:08:23 PM »

Any competent tuner will be able to work out which is which in a couple of seconds,  so I wouldn't worry which way you do it.

The clue is in the "competent" bit.  ;D

Indeed :D
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Reed orientation for tremolo tuning
« Reply #17 on: January 07, 2011, 02:17:08 AM »

Here is a source for standard Hohner layouts.  Starting on page 23 it shows the chord block layouts and the 'on pitch' and 'sharp' rows of their various models and tunings.

http://hohnerusa.com/upload/links/l_00000777_Parts_Diagrams_and_Fingering_Charts.pdf
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Reed orientation for tremolo tuning
« Reply #18 on: January 07, 2011, 06:25:18 AM »

Here is a source for standard Hohner layouts.  Starting on page 23 it shows the chord block layouts and the 'on pitch' and 'sharp' rows of their various models and tunings.

http://hohnerusa.com/upload/links/l_00000777_Parts_Diagrams_and_Fingering_Charts.pdf
Ah - that's very interesting. Thanks for posting!
Looking at the reed block layouts on these diagrams, there would indeed appear to be a Hohner standard layout for the reeds on the blocks, with the 'sharp' pitched reeds on what they term as 'Side B' of the reed blocks.

So in my photo on this post , the block layout is the same as the quoted Hohner standard. 'Side B' is facing downwards in my photo; the top (chin end) of the melodeon is to the right. (Top is on the left in the Hohner diagrams).

However, I wonder how far back in time adherence to this standard goes.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed orientation for tremolo tuning
« Reply #19 on: January 07, 2011, 07:59:28 AM »


However, I wonder how far back in time adherence to this standard goes.

As far as the 1930s at least, from my experience of working on older boxes.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal