Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Speaking of faceplates  (Read 5019 times)

0 Members and 1 Guest are viewing this topic.

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Speaking of faceplates
« on: January 09, 2011, 05:23:51 AM »

It was brought up that thickness of faceplates affect sound.  I'm also wondering about other things relating to faceplates.  Most folks (I think) use plywood for the faceplate.  Some glue a nice veneer to the plywood if the faceplate is visible.  Many builders here use contact cement, which never really hardens, making me wonder if that muffles tone any.  Seems to me like it would.  On the ones I'm building now, I've decided to go with hide glue on the veneer to see if it makes a difference, since it hardens like crystal.  Many luthiers swear it does.  If it does make a difference, I may look at making my own plywood using hide glue.  I've thought long and hard about using solid wood, but have so far chickened out. 

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Speaking of faceplates
« Reply #1 on: January 09, 2011, 07:16:23 AM »

I've decided to go with hide glue on the veneer to see if it makes a difference, since it hardens like crystal.  Many luthiers swear it does.  If it does make a difference, I may look at making my own plywood using hide glue. 
The individual laminae in commercial plywood are bonded using formaldehyde glue. When cured, this has a high degree of rigidity, so I'm uncertain what advantage you would gain by making your own plywood using hide glue.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Speaking of faceplates
« Reply #2 on: January 09, 2011, 07:41:21 AM »

Quote
If it does make a difference, I may look at making my own plywood using hide glue.  I've thought long and hard about using solid wood, but have so far chickened out.

I'm curious why you wouldn't want to use solid wood, other than the cost relative to plywood. Is it long term wood movement that you're concerned with?

When I was planning to build my own [aborted] accordion last year, I was set on using solid maple or cherry. My only concern was finding a board from the stock locker which required only minimal flattening.

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Speaking of faceplates
« Reply #3 on: January 09, 2011, 01:29:51 PM »

Steve, not sure either, and like most of my experiments, probably wouldn't be any significance.  But my thought is based on something else I experimented with.  Reed blocks in my area are generally maple, I was told to use hard maple.  So I  thought if harder is better, I'll try something harder.  I have access to hickory, which is a good bit harder than maple, so I tried that.  What I got was louder and clearer but with less overtones, not what I was looking for.  So my thought with the faceplate is the same, just in case it's not just a rigidity issue, but maybe for whatever reason hide glue gives better tone, may be worth a shot.  Many luthiers sure seem to thing it makes a difference.  Of the experiments I have dreamed up, it would be one of the more doable ones.  I use no scientific basis for much, just wondering.  It's what I'm enjoying most about the building process. 

Christopher, my hold back is the fact that it is so common in older accordions with solid wood to crack.  There are weak spots since the holes are so close together.  And this problem would turn up down the road.  Haven't ruled it out, just put it down the list a bit.

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Speaking of faceplates
« Reply #4 on: January 09, 2011, 03:43:17 PM »

Equally though, solid wood may vibrate better and provided that it is the correct thickness and isn't abused should last. I think that most soundboards on Italian accordions are solid cedar, but may be radically misremembering that. In any case, if what you say is true about the glue then it is probably worth a shot, it'll be interesting to see how your current accordion turns out.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: Speaking of faceplates
« Reply #5 on: January 09, 2011, 04:05:47 PM »

I think that most soundboards on Italian accordions are solid cedar

I've only encountered plywood or aluminium soundboards.

I made a new soundboard for a box some time ago, and I used model airplane plywood 5mm thick. I picked out the piece with the finest grain, and with no knots. The sound was very pleasing - very close to the original italian 50's plywood. I drilled 10 mm. round holes to match the original reedblocks.
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Speaking of faceplates
« Reply #6 on: January 09, 2011, 04:24:56 PM »

I've only encountered plywood or aluminium soundboards.

Cool, I was misremembering it, thought I might be :P
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Speaking of faceplates
« Reply #7 on: January 09, 2011, 04:59:29 PM »

@ukebert: If there is one thing you don't want your faceplate to do it is to vibrate... accordions are not like violins. The same applies to the reedblocks. Vibrating blocks (especially the ones that are not connected with a "traversina") result in poor sound, best noticed in a very unregular, limping tremolo.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Speaking of faceplates
« Reply #8 on: January 09, 2011, 05:28:46 PM »

best noticed in a very unregular, limping tremolo.

Limping tremolo - great description!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Speaking of faceplates
« Reply #9 on: January 09, 2011, 05:30:34 PM »

@ukebert: If there is one thing you don't want your faceplate to do it is to vibrate... accordions are not like violins. The same applies to the reedblocks. Vibrating blocks (especially the ones that are not connected with a "traversina") result in poor sound, best noticed in a very unregular, limping tremolo.

Ah right, I hadn't gathered that. So you want the entire box to be as stiff as possible to minimise vibration? Interesting.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Speaking of faceplates
« Reply #10 on: January 09, 2011, 06:29:26 PM »

I can see not wanting the vibrations, but I do think there are qualities in the construction of the case that do affect sound quality.  Just can't justify it. 

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Speaking of faceplates
« Reply #11 on: January 09, 2011, 09:54:12 PM »

Of course there are.  I've come to consider many of them traps that I want to avoid. Anything in my construction that could muffle sound, or that might result in a tonal difference between the inner and outer row etc... I could also build real cassottos or design special grills  that might yield a certain cassotto effect. But the cassotto sound is just not something I like to associate with melodeons. To keep it simple: I have my expensive set of reeds and I'm trying to exploit their potential of raw power to the fullest by not creating obstacles of some sort.
« Last Edit: January 09, 2011, 09:58:30 PM by diatonix »
Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Speaking of faceplates
« Reply #12 on: January 09, 2011, 10:45:34 PM »

I've come to consider many of them traps that I want to avoid.

I find I have to step in many traps to find a gem.  I guess when I run out of hair brain ideas to try out I may abandon accordion building. (:)

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Speaking of faceplates
« Reply #13 on: January 10, 2011, 10:32:55 PM »

I have two questions.

1) If an accordion faceplate made of solid wood if more susceptible to cracking, then can grain orientation be changed to prevent this?

2) What is the cause of the cracks - is it wood movement across the grain, or some type of stress?

Most accordions with wooden faceplates have the grain running at right angles to the edges of the faceplate (or casework). The cracks open along these lines. Would cutting the piece with a grain orientation closer to something like 45 degrees (like a guitar's bridgeplate) to the edges of the plate solve a problem? Not a terribly economical solution...

 

oggiesnr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 995
  • Dino BPII, Alfred Arnold Bandoneon, Loffet G/C
Re: Speaking of faceplates
« Reply #14 on: January 10, 2011, 11:34:59 PM »

Not all plywoods are created equal.  In general terms the most stable is Finnish Birch ply.  Not only should both faces be knot free but (as a general rule) the insides will also be, it should also be devoid of the filler and holes which make cheaper plys (take a pace forward Latvian ply) unstable for instrument use.  I would also suggest that you should be looking for a minimum of 5-ply no matter what the thickness BUT at this does make the thinner plys somewhat expensive (1/16th 5 ply, aircraft ply, is a horrendous price).

I have used some North American boards but I found that in general usage they were weaker than the Finnish boards, I think because the woods were not as strong/dense to start off with (larch and poplar seemed to figure highly).  I wonder if one of the problems with the Chinese boxes is that the quality of Chinese ply is not good?

For solid woods, altering the orrientation of the grain to 45 degrees won't really do anything other than make the corners of the board even weaker.

Steve
Logged

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Speaking of faceplates
« Reply #15 on: January 11, 2011, 12:51:06 AM »

Anyone try HDF  or MDF   or bamboo cutting boards /flooring ?
Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Speaking of faceplates
« Reply #16 on: January 11, 2011, 01:26:43 AM »

No, but I've sure thought about the bamboo.  I saw a wall of that stuff in the mall.  I find myself looking at everything wondering if it has a use in an accordion.   It seems like it would be pretty stable.

Oggiesnr, I've used air craft ply exclusively.  Not sure where it stands for sound, but it should be pretty consistent.  You're right, it's crazy expensive, and 1/8" is getting hard to obtain.  Every time I've ordered some it was back ordered for a couple months.

Solid wood is the one I'm most wanting to try, just too worried.

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Speaking of faceplates
« Reply #17 on: January 11, 2011, 01:44:51 AM »

Quote
I find myself looking at everything wondering if it has a use in an accordion.

Time to contact Pete Hyde  ;D

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: Speaking of faceplates
« Reply #18 on: January 11, 2011, 10:09:46 AM »

Anyone try HDF  or MDF   or bamboo cutting boards /flooring ?

Hi Jeff,
I think that bamboo is a great idea.  It could also be milled for reedblocks, and I think it would make for a nice keyboard, too.  Pallets.  If you really went wild with the stuff, you could even make reeds out of it!

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Speaking of faceplates
« Reply #19 on: January 11, 2011, 12:01:55 PM »

  If you really went wild with the stuff, you could even make reeds out of it!

That's an idea, no rust! Heck it may even be flexible enough to make bellows.
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal