Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Idea to fit slightly wider-topped buttons to Liliput  (Read 2678 times)

0 Members and 1 Guest are viewing this topic.

Sandy Flett

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
    • Accordion and Melodeon Blog
Idea to fit slightly wider-topped buttons to Liliput
« on: January 16, 2011, 11:53:53 PM »

How feasible, technically, would it be to replace the treble and bass buttons on a Hohner Liliput with slightly wider-topped buttons, and where might one source such buttons?
Logged
DG Dino Baffetti Carnival II (plus accordions)
Accordion and Melodeon blog

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Idea to fit slightly wider-topped buttons to Liliput
« Reply #1 on: January 17, 2011, 08:06:16 AM »

Later models of Liliput have larger diameter buttons than the early ones.  Those on the later models are the same size as the bass buttons on the Hohner Erica, I have used Erica bass buttons as replacements on a late model Liliput, so it does definitely work.  It would be an awkward, but not impossible job to replace the smaller diameter buttons.   You would probably have to break the old buttons to get them off the wire rods they work through, and enlarging the holes in the fingerboard would require some very careful work to ensure the holes are all the correct size, and to avoid chipping the celluloid covering of the fingerboard. Alternatively one could make a new top piece for the fingerboard.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Sandy Flett

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
    • Accordion and Melodeon Blog
Re: Idea to fit slightly wider-topped buttons to Liliput
« Reply #2 on: January 17, 2011, 10:07:32 AM »

Thanks Theo. I was hoping to avoid having to modify the fingerboard (to widen the holes) by using T-shaped buttons such as fitted on the bass of my Pokerwork.

What concerns me now is your mentioning that I would probably have to break the old buttons off the wire rods. I had rather optimistically hoped I could unscrew them; are they just pressed onto the rod and stay there by friction, presumably locked solid after 70 years?

It occured to me that perhaps I could glue a small plastic disc (can you get white tiddlywinks pieces?) on top of the existing buttons. But the existing buttons have rounded tops, and also this would not be reversible.
Logged
DG Dino Baffetti Carnival II (plus accordions)
Accordion and Melodeon blog

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Idea to fit slightly wider-topped buttons to Liliput
« Reply #3 on: January 17, 2011, 05:44:42 PM »

Hi Sandy,

I once knew a poor fellow who came up with some very strange modifications to accordions and concertinas, usually ill-advised and sometimes disastrous.  One of these was to machine little metal button caps to turn the metal-capped wooden buttons of a Wheatstone Linota anglo into "mushroom tops." These were small disks with a shallow concavity machined into the bottom.  Then he superglued them on to the buttons, with the fretwork of the concertina in place.

Well, of course this meant the action could not be opened up for service.... when he realized this, he tried a solvent bath, tugging at the add-on disks, resulting in pulling the action uprights loose.... anyway the thing eventually came to me and I finally got the caps off and the action back in shape.

So, think carefully about how you might attach button-caps to the tops of your Liliput buttons.

Not saying something like this couldn't be done....You would have to experiment, but  I *think* that if you used mushroom-top buttons with a built in (tiny) screw in the bottom, such as I removed from a stepped-keyboard Paolo in converting it to flat keyboard, you could drill fine pilot holes in the original Liliput buttons and screw the mushroom ones right into the original ones, from the top of the keyboard.  Then the mushroom ones could be unscrewed if the keyboard needs to be taken apart for service.  The pilot holes drilled into the original buttons would need to be shallow and/or placed to avoid hitting the metal lever.  You might have to shorten the length of the screw built into the mushroom buttons with a hacksaw or file. Some adjustment of the levers might also be needed for the right button height you prefer. You will probably want a felt washer under the "mushroom" to make a soft landing on the keyboard.  Sometimes buttons like this have a tendency to unscrew themselves during playing, but a little tacky adhesive that is not too strong can hold them in place while still allowing them to be unscrewed intentionally if needed.

Let us know how this turns out!

PG
Logged

Sandy Flett

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
    • Accordion and Melodeon Blog
Re: Idea to fit slightly wider-topped buttons to Liliput
« Reply #4 on: January 17, 2011, 08:30:05 PM »

Many thanks, Paul. Excellent, timely advice. Will advise how I get on, but don't hold your breath as it seems quite daunting for me to try something like this.

I think I would try to do the 8 bass buttons first to see how that works out. I think I also maybe need to do a picture mock-up of what the end product would look like, just in case it looks completely out of place.

The other thing I need to do is to keep playing the Liliput to see if I can get all the tricky bits of playing that work on my Tommy to work eventually on the small buttons of the Liliput - ie so I do avoid modifying the instrument.
Logged
DG Dino Baffetti Carnival II (plus accordions)
Accordion and Melodeon blog

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Idea to fit slightly wider-topped buttons to Liliput
« Reply #5 on: January 17, 2011, 11:05:30 PM »


The other thing I need to do is to keep playing the Liliput to see if I can get all the tricky bits of playing that work on my Tommy to work eventually on the small buttons of the Liliput - ie so I do avoid modifying the instrument.

I think that is a much more sensible option.

I understand Paul's suggestion for attaching button tops, but I fear it is a non-starter on the Liliput, because the buttons normally travel all the way down till the tops are flush with the surface of the fingerboard.  So for the caps to have something to grip onto you would either have to enlarge the holes in the fingerboard, or modify the action so that the buttons stood higher.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Sandy Flett

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
    • Accordion and Melodeon Blog
Re: Idea to fit slightly wider-topped buttons to Liliput
« Reply #6 on: January 17, 2011, 11:35:59 PM »

As I understand it, the mushroom cap sits on the top of the existing button. So, when it is pushed down such that the cap (or, more precicely, its felt washer) is in contact with the fingerboard, will not that have pushed the original button as deep as when your finger has reached the fingerboard in the case of no cap? Too late to draw and scan in a sketch tonight, but if needed can do that in the morning.
Logged
DG Dino Baffetti Carnival II (plus accordions)
Accordion and Melodeon blog

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Idea to fit slightly wider-topped buttons to Liliput
« Reply #7 on: January 17, 2011, 11:42:49 PM »

I think your time and energy would be much better directed to learning to use the Liliput buttons as they are.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Sandy Flett

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
    • Accordion and Melodeon Blog
Re: Idea to fit slightly wider-topped buttons to Liliput
« Reply #8 on: January 18, 2011, 10:42:19 AM »

Yes, you are right, Theo. I have just realised that it would take some real skill to fit the caps not only in the centre of the buttons (missing the rods coming up) but also at the sloping angle of the fingerboard so that the original buttons did indeed go all the way down. And the sloping buttons probably would look odd anyway, and I risk spoiling a valuable and good looking instrument. Ah well, it was fun thinking about it, and thanks for the wise inputs.
Logged
DG Dino Baffetti Carnival II (plus accordions)
Accordion and Melodeon blog
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal