Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Overpowering basses  (Read 10945 times)

0 Members and 1 Guest are viewing this topic.

Nick Hudis

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 334
  • Loffet Pro 18, Castagnari Casta
    • Themassageman
Overpowering basses
« on: June 06, 2008, 09:45:51 PM »

It often seems to me that the basses on my melodeons tend to drown out the treble.  I understand that there may be good physical reasons for this: air flowing with less resistance through the larger bass reed spaces, instruments built with a good solid tutonic oom-pa sound in mind.  I am also familar with the musical solutions:  playing the bass crisply staccatto, playing the chords rather than the fundamentals in gentler tunes etc.  But sometimes I just want to play a nice musical bass line which doesn't sound like a tuba convention.

I've found this to be an issue with the Verde D/G I play (which in fact generally has a very full on sound) and also my currently favourite instrument, an old Hohner Club II Victoria, but less so with my new ( and also favourite) Liliput.

From time to time I wonder if there might be a mechanical solution.  e.g.

muffling the bass end in some way

taping over the lowest fundamental, like some of folks tape over the third of the chord

and here's one for you repairers:  Would it be totally off the planet to contruct some form of  coupler to stop the low bass or third on an old box like the Victoria?

I am sure I am not the first person to raise questions like these, but I'd appreciate the wisdom of you guys out there who understand such things.
Logged
Nick

GuyWyatt

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 303
Re: Overpowering basses
« Reply #1 on: June 06, 2008, 10:06:14 PM »

my box (a Bernard Loffet that I love dearly) also has a very fat bass end. Rich and fabulous, but I do feel sometimes that it can overpower the melody end. As a result I tend to play very sparse basses. A bit of  standard vamping but more often a oom or a pah here or there.

Anyway, what is wrong with a tuba convention?

Guy
Logged

BruceHenderson

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 262
Re: Overpowering basses
« Reply #2 on: June 06, 2008, 11:58:14 PM »

(snip) From time to time I wonder if there might be a mechanical solution.  e.g.

muffling the bass end in some way  (snip)

    I'm not really the person to ask (in my opinion, "too much bass" is like "too many wimmins") but I think that I'd muffle the "outlet" before I did anything else.  I don't know the Verde (or Liliput, for that matter) but most 2-row boxes have an "end plate" with holes and a cloth-mesh covering over the holes.  I'd try a heavy cloth or felt and cover maybe half the holes.  You can do this in 3 minutes and you wouldn't lose the balance of the bass reeds.  Not enough muffling, or too much, pull maybe 4 screws and you're in there to fine-tune it.

    It might take a little experimentation but you can surely come up with something that suits you (and I'm guessing the layout -- how many holes you baffle and the location of them -- will vary from box to box), but I'd try everything before I started taking out bass reeds.

BH NC USA
Logged
I love one-rows!  Four reeds kick butt!!!!

JaxDelaguerre

  • Member
  • *
  • Offline Offline
  • Posts: 4
  • Perform on button box, concertina and contrabasse
    • The Home Page of Polymusician Jacques Delaguerre
Re: Overpowering basses
« Reply #3 on: June 07, 2008, 07:49:52 AM »

Sometimes the instrument isn't well designed. But usually, it's just technique.

Every time I show a button box to a novice, it's "Wow, how do you remember all those buttons?"

That's the easy part (as we here all know). It's really all the bellows, which is to squeezing what the bow is to fiddling.

Better bellows control!
Logged
Et le jardin entier s'abîma avec le couple, dans un dernier cri de
passion. - Zola, La Faute de l'Abbé Mouret

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Overpowering basses
« Reply #4 on: June 07, 2008, 09:54:53 AM »

Regarding a Victoria, it is possible to put the  linkage "out of gear" by bending the levers, so that bass buttons only operate for  two "bass" reeds instead of adding two of the "chord " reeds. If you do not see what I mean a look at the mechanism should make it apparent.
While reversible, this is obviously a semi permanent modification.
 Hohners do not lend themselves to switching out thirds, because of the way the reeds are arranged, and I have never understood how people claim to tape them out?
If you simply want to mute the l/h a sheet of heavy paper over the sound holes might suffice. You can try this from outside before bothering to remove the board.
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Overpowering basses
« Reply #5 on: June 07, 2008, 10:55:46 AM »

Before you do any modifications, carry out some objective tests to see whether the basses really do overpower the treble.
Remember that because of the acoustics of positioning, the shape of the box, the grille, reeds, pallets, etc., what you hear as the player can be quite different from what listeners hear.

A few years ago, a friend was convinced that her Dino Black Pearl 2 basses were far too loud for the treble, and that the melody line was getting swamped. A group of us listened to her play and found that the basses were not too loud at all, we could hear the melody perfectly well, and overall it sounded just fine. A few other people have had similar concerns since then, including a couple of times on the Melodeons at Witney weekend. In all cases they have been persuaded that their perceptions were different from other people's, and in fact their instruments were OK after all.

It is therefore worth getting other peoples' opinions; you might be pleasantly surprised. Furthermore, if at all possible, I recommend you record yourself playing, with a reasonably good set-up and with the microphone positioned carefully at some central point in front of you a few feet away. Hopefully then you would be able to objectively decide whether your bass and treble ends were unbalanced or not.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Overpowering basses
« Reply #6 on: June 07, 2008, 11:34:15 AM »

Remember that because of the acoustics of positioning, the shape of the box, the grille, reeds, pallets, etc., what you hear as the player can be quite different from what listeners hear.

There are good acoustic reasons for this.  One is that higher pitch sounds are much more directional than bass sounds, so you could envisage a beam of sound going out from the treble end , while low pitches spread out to all directions relatively quickly.  A second acoustic reason is that high pitches are absorbed relatively more by surfaces nearby, so you get more of the bass reflected back to you.  The result for the player is the feeling that you are enveloped in bass and the treble sounds weak.  If you are noticing this then it mainly means that you are paying careful attention to the sound you are making, in time you will get used to the effect, but its not a sign that you need to start making serious changes to the box.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Overpowering basses
« Reply #7 on: June 07, 2008, 11:37:34 AM »

Hohners do not lend themselves to switching out thirds, because of the way the reeds are arranged, and I have never understood how people claim to tape them out?

Simply by putting a piece of sticky tape over the individual reed - over the reed tongue for push reeds, and over the valve for pull reeds.  If you have to take the tape off again the valve will usually need to be replaced, or the reed tongue cleaned of sticky residue.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

meltzer

  • Guest
Re: Overpowering basses
« Reply #8 on: June 07, 2008, 12:44:13 PM »

This is possibly a really really stupid question, but won't covering up the sound holes at the bass end do something to the bellows pressure (cos it makes it harder for the air to get out)?
Logged

Waltham

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 198
Re: Overpowering basses
« Reply #9 on: June 07, 2008, 03:43:09 PM »

Simply by putting a piece of sticky tape over the individual reed - over the reed tongue for push reeds, and over the valve for pull reeds.  If you have to take the tape off again the valve will usually need to be replaced, or the reed tongue cleaned of sticky residue.
Or you could take out the reed block and put a piece of low-tack masking tape over the relevant air hole or holes.  Using this method you can only take out push and pull together, but it's completely reversible.  You can even use paper insted of masking tape, it's just a bit fiddlier to keep in place.  Remember not to screw the cleat down too hard when replacing the reed block.
Logged

Bill the Farmer

  • Not quite so
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 497
  • Hohner Club, Liliput...
    • Bill Farmer
Re: Overpowering basses
« Reply #10 on: June 07, 2008, 03:46:14 PM »

When I took my wife's Lilly apart for the first time after she'd had it for about five years, we found a piece of card inside the bass end cover spaced away from the sound holes. It works a treat to tone down the bass end a bit, so it stayed in there.
Logged
Bill of Old Radipole Village

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Overpowering basses
« Reply #11 on: June 07, 2008, 04:40:53 PM »

.
Or you could take out the reed block and put a piece of low-tack masking tape over the relevant air hole or holes.  Using this method you can only take out push and pull together, but it's completely reversible.  You can even use paper insted of masking tape, it's just a bit fiddlier to keep in place.  Remember not to screw the cleat down too hard when replacing the reed block.
[/quote]

THIS is what I meant about not being possible with Hohners
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Overpowering basses
« Reply #12 on: June 07, 2008, 04:57:05 PM »

It is therefore worth getting other peoples' opinions; you might be pleasantly surprised. Furthermore, if at all possible, I recommend you record yourself playing, with a reasonably good set-up and with the microphone positioned carefully at some central point in front of you a few feet away. Hopefully then you would be able to objectively decide whether your bass and treble ends were unbalanced or not.

I forgot to add - you could get someone else to play your melodeon while you listen carefully from all angles and directions.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Overpowering basses
« Reply #13 on: June 07, 2008, 05:23:03 PM »

Simply by putting a piece of sticky tape over the individual reed - over the reed tongue for push reeds, and over the valve for pull reeds.  If you have to take the tape off again the valve will usually need to be replaced, or the reed tongue cleaned of sticky residue.
Or you could take out the reed block and put a piece of low-tack masking tape over the relevant air hole or holes.  Using this method you can only take out push and pull together, but it's completely reversible.  You can even use paper insted of masking tape, it's just a bit fiddlier to keep in place.  Remember not to screw the cleat down too hard when replacing the reed block.

This method works on most Italian built boxes, but the point I was answering was related specifically to Hohners where the thirds for the push and pull chords are not on the same reedplate, except in one or two less common models.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Nick Hudis

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 334
  • Loffet Pro 18, Castagnari Casta
    • Themassageman
Re: Overpowering basses
« Reply #14 on: June 08, 2008, 08:24:46 AM »

Thanks for all this advice: Thanks to Steve and Theo for the explanation of why the boxes sound too bassy.  Its funny that when I listen to other players their basses never sound overpowering. Now I know why!  I guess I'm just at the stage in learning the instrument where, having given up on vamping, I'm trying to be a bit adventurous with the bass  and thinking more about the sound I'm making.

Thanks to Jax for the thought about bellows control.  By the way, I love you Club website, its what got me into the idea of playing Clubs and so discovered the type of instrument I'm really at home with.

I might try some external muffling of the holes, but I think as Theo put it, I'll just learn to get used to the sound while I work up my bellows control.
Logged
Nick

Lin Leighton

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 208
  • Castagnari Tommy/ Dino Baffetti BP
Re: Overpowering basses
« Reply #15 on: June 09, 2008, 03:04:57 PM »

I am so pleased to read this discussion and particularly Steves comments about his friend, because that is exactly what I have been "hearing" since treating myself to my new Dino Black Pearl 2 - basses far louder than treble.  It IS very disconcerting - but now that Theo has given the official seal of approval (it means we are listening to our playing)  then I will relax and enjoy
thanks all   ::)
Lin
Logged
Lin(Rattlejag Morris)

Dazbo

  • Mods and volunteers
  • Respected Sage
  • ***
  • Offline Offline
  • Posts: 364
  • Danger MAD Here!
    • My YouTube Channel for melodeons, morris and folk in general
Re: Overpowering basses
« Reply #16 on: June 09, 2008, 04:06:39 PM »

because that is exactly what I have been "hearing" since treating myself to my new Dino Black Pearl 2 - basses far louder than treble

I had the same "problem" with my Dino BPIII.  Is this effect more pronounced on BPs as I've not noticed it on my Tommy (perhaps I've just got used to it or because it's only a two voice bass)
Logged
Ciao Bellow

Darren

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Overpowering basses
« Reply #17 on: June 09, 2008, 04:20:19 PM »

Hmmm   Black Pearls can have particularly loud basses ???
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lin Leighton

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 208
  • Castagnari Tommy/ Dino Baffetti BP
Re: Overpowering basses
« Reply #18 on: June 10, 2008, 01:35:28 PM »

confirming what Dazbo said - I dont hear the basses on my Tommy as loudly as on BPII
Lin
Logged
Lin(Rattlejag Morris)

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Overpowering basses
« Reply #19 on: June 10, 2008, 02:42:52 PM »

That sounds right.  I find Tommy, and Lily basses a bit wimpy.  If you want a good low bass sound you need decent sized reeds with plenty of space for them to breathe. That will always handicap small format boxes like the Tommy etc, at least until the melodeon equivalent of Dr Who can build one that is bigger on the inside than on the outside. Like Harley Davidson buffs say "there ain't no substitute for cubes!"
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal