Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3 4 5   Go Down

Author Topic: Pitch shift after tuning a reed  (Read 16745 times)

0 Members and 2 Guests are viewing this topic.

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Pitch shift after tuning a reed
« on: January 26, 2011, 08:46:34 PM »

I've been working on fine tuning the new Weltmeister reeds in my Erica for about a week now. I'm using both a Korg 120 and Dirk's Tuner to help me with accuracy. I decided to do the easiest tuning sequence for the time being, meaning I'm tuning one reed to concert pitch and the second reed sharp and using a Hohner tremolo design. To lower the pitch I'm using a standard scratcher to make a scratch down the tongue starting from the middle of the tongue and ending somewhere near the rivet. To raise the pitch I'm using a piece of 600 grit sandpaper attached to a lolly.

One thing I've been noticing is that I can tune the concert pitch reed to be within .02 cents of perfectly on pitch with Dirk's tuner one day and come back a day or two later to find that reed has become sharper by up to 2 cents from where I left it. I lower the pitch on that reed again and find the pitch has sharpened a day or two later. Is this normal or should the reed stay the same pitch once I put it there? I'm starting to set the reeds intentionally flat by about 1.5 cents or so and hoping they come up to on pitch later but that seems inexact.

I have a feeling that, for Hohner tuning, it's probably "close enough" but I'm trying to learn how to tune to exact pitch in anticipation of my next project.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

squeezebox63

  • Member
  • *
  • Offline Offline
  • Posts: 42
Re: Pitch shift after tuning a reed
« Reply #1 on: January 26, 2011, 09:10:34 PM »

Are you exposing the reeds to a different temperature, from tuning to storage.
maybe it's your tuner, I use a peterson strobosoft deluxe which is a computer download. It works very well.
Your reeds are new so it should'nt be a grit or rust problem. Rust will drive a tuner nuts.
Cliff.
Logged

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Pitch shift after tuning a reed
« Reply #2 on: January 26, 2011, 09:21:00 PM »

The instrument is staying in my basement shop which has a very even temperature from day to day. I've recently tested Dirk's tuner against my Korg OT-120 again thinking the tuner might be the problem. The two tuners agree to an amazing degree. The problem might be in the readings for two reeds at the same time, a nice feature of Dirk's that I specifically wanted.

Anyone else used Dirk's tuner for tuning a two reed note? What have your experiences been?

I'll look at the Peterson program tomorrow. Thanks for the suggestion.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Pitch shift after tuning a reed
« Reply #3 on: January 26, 2011, 09:45:11 PM »

Any chance there could be some inconsistency in bellows pressure when sounding the reed?  It can make a difference.

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Pitch shift after tuning a reed
« Reply #4 on: January 26, 2011, 10:16:15 PM »

I'm sure you know about the difference in pitch inside and outside the instrument, but just in case... are you tuning the reedblocks outside the instrument and then testing the tuning after putting them back in?

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Pitch shift after tuning a reed
« Reply #5 on: January 26, 2011, 10:39:42 PM »

I'm sure you know about the difference in pitch inside and outside the instrument, but just in case... are you tuning the reedblocks outside the instrument and then testing the tuning after putting them back in?

I'm tuning the treble side as a unit with reedblocks installed using a bellows attached to my bench. Something similar to the kind of thing shown on the Thiery Benetoux website, bottom photo. The bellows side of the treble side is placed on the top of the bellows and then the bellows opened and closed to create pressure. I can't imagine there's much if any difference between this setup and attaching the treble side to the instrument's bellows. I like this setup quite a bit as it's faster than attaching and detaching the treble side every time you make a change to a reed.

I do try to keep the pressure the same each time I sound a note.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Pitch shift after tuning a reed
« Reply #6 on: January 26, 2011, 10:50:32 PM »

The problem might be in the readings for two reeds at the same time, a nice feature of Dirk's that I specifically wanted.


Since you seem to have eliminated all the remaining suggestions then Sherlock Holmes' dictum must apply.
Quote from: Conan Doyle
"How often have I said to you that when you have eliminated the impossible, whatever remains, however improbable, must be the truth?"
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Pitch shift after tuning a reed
« Reply #7 on: January 26, 2011, 11:28:08 PM »

The problem might be in the readings for two reeds at the same time, a nice feature of Dirk's that I specifically wanted.


Since you seem to have eliminated all the remaining suggestions then Sherlock Holmes' dictum must apply.
Quote from: Conan Doyle
"How often have I said to you that when you have eliminated the impossible, whatever remains, however improbable, must be the truth?"


I'll go back to taping off the concert reed for each note and see if the concert reeds stay the same from day to day. Back to relying on the ears again. Thanks Sherlock - ;D

This issue does make me wonder how to go about the process of tuning an instrument to "Dedic" tuning. Each reed must be a precise amount of cents below and above the particular note in order to arrive at being both in tune and the right amount of tremolo. I'd been hoping to use Dirk's for just such a tuning programme for one of my other melodeons. How have others approached setting the tuning of each reed when using a Dedic tuning?

Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Pitch shift after tuning a reed
« Reply #8 on: January 26, 2011, 11:53:54 PM »

I'll go back to taping off the concert reed for each note and see if the concert reeds stay the same from day to day. ...

This issue does make me wonder how to go about the process of tuning an instrument to "Dedic" tuning. Each reed must be a precise amount of cents below and above the particular note in order to arrive at being both in tune and the right amount of tremolo. I'd been hoping to use Dirk's for just such a tuning programme for one of my other melodeons. How have others approached setting the tuning of each reed when using a Dedic tuning?
In your case and with your methodology, I would recommend tuning just one reed bank at a time, i.e. tune the M- and M+ reeds in separate sessions. Use masking tape along the reed block ports to tape off the other bank of reeds and use your tuner to work on a single reed, rather than trying to get it to respond to both reeds. So - tape off all the (say) M+ reeds first and tune just the M- reeds. Reassemble the instrument and check all the M- reeds you've just tuned. Adjust as necessary. Once you've tuned the M- reeds, remove the tape from the M+ reeds and tape off the M- reeds so you can then tune the M+ reeds in a similar fashion. Reassemble the instrument and check.

Next, remove all tape and check the overall tuning and tremolo - you ought to be very close to the desired tuning by now. Play the instrument for a bit and then make any fine adjustments which might be needed.

Let the reeds settle down for a few days of playing, then finally check again and adjust as necessary.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Pitch shift after tuning a reed
« Reply #9 on: January 27, 2011, 12:41:10 AM »

To raise the pitch I'm using a piece of 600 grit sandpaper attached to a lolly.

You must have great patience!  :o
Logged

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Pitch shift after tuning a reed
« Reply #10 on: January 27, 2011, 03:09:30 AM »

Anyone else used Dirk's tuner for tuning a two reed note? What have your experiences been?

   I use mine in this way. You may also notice that there exists some sympathy between the + and _ reeds, as well as between the octave tuned reeds. When you alter the pitch of, say, the plus reed, it will often affect the pitch of the minus reed, and vice versa.
  The physical effect will occur also with the octaves. There is a tendency for them (if they are close) to try to lock together, after a bit of wandering.
   This makes dedic tuning a bit of a chore, as you will be attempting to tune both reeds so that the resultant sound is on pitch, but still having the desired beating value. Truly a moving target! :P I think that is why the tuning is not used more commonly.
« Last Edit: January 27, 2011, 03:16:31 AM by j.w.forrest »
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Pitch shift after tuning a reed
« Reply #11 on: January 27, 2011, 08:41:24 AM »

I am quite happily using Dirk's tuner. My methodology is to tune on my tuning rig individual reeds against my tuning plan and then to check/rectify on two reed setting once the reed blocks are in the box. This invariably requires some fine retuning.

Currently tuning a new set of Cagnoni reeds in an Erica and they are being a little recalcitrant but that seems to be down to the reeds being slightly different shape to Hohner reeds and some work being needed to reshape the reed blocks for some reeds.

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Pitch shift after tuning a reed
« Reply #12 on: January 27, 2011, 08:58:58 AM »

You may also notice that there exists some sympathy between the + and _ reeds, as well as between the octave tuned reeds. When you alter the pitch of, say, the plus reed, it will often affect the pitch of the minus reed, and vice versa.
  The physical effect will occur also with the octaves. There is a tendency for them (if they are close) to try to lock together, after a bit of wandering.
   This makes dedic tuning a bit of a chore, as you will be attempting to tune both reeds so that the resultant sound is on pitch, but still having the desired beating value. Truly a moving target! :P I think that is why the tuning is not used more commonly.

I don't see why the coupling between + and - reeds shouldn't apply equally to conventional "concert + sharp" tuning. Keeping one bank on concert and the other the right amount sharp is just as much of a moving target if they affect each other.

As for octaves, the reeds are further apart physically and don't share an airway so I doubt there'd be much coupling in that case. Strapping the blocks together can help if there's mechanical coupling, but that manifests itself as an irregular burbling (dropping in and out of lock) more than a slight change of pitch.

A third voice an octave lower would bring the reeds physically closer, but I think IanD himself is on record as not recommending Dedic tuning for a three voice box.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Pitch shift after tuning a reed
« Reply #13 on: January 27, 2011, 09:02:34 AM »


I'll go back to taping off the concert reed for each note and see if the concert reeds stay the same from day to day. Back to relying on the ears again. Thanks Sherlock - ;D

You've come to the same conclusion as I have, that electronic tuners can only take you so far in the tuning process.  It is essential to do the final tuning by listening.  After all we are making instruments that we want to sound good to the human ear.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Pitch shift after tuning a reed
« Reply #14 on: January 27, 2011, 09:04:24 AM »


A third voice an octave lower would bring the reeds physically closer, but I think IanD himself is on record as not recommending Dedic tuning for a three voice box.


Only on a box with couplers where the LM setting would sound bad.  LMM in Viennese (Dedic) tuning works well.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Pitch shift after tuning a reed
« Reply #15 on: January 27, 2011, 11:28:45 AM »

Only on a box with couplers where the LM setting would sound bad.  LMM in Viennese (Dedic) tuning works well.

Yes, I nearly added that. Any box with couplers wouldn't work well in Dedic tuning - MM with only one bank selected would be flat, and an LMM box with only MM selected would arguably have double the tremolo rate.

I've met an LMMM box whose owner could select M+ and M- without the middle M. It's good for shock value but not much else.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Pitch shift after tuning a reed
« Reply #16 on: January 27, 2011, 12:06:49 PM »

Only on a box with couplers where the LM setting would sound bad.  LMM in Viennese (Dedic) tuning works well.
and an LMM box with only MM selected would arguably have double the tremolo rate.
I don't quite follow that.
In Dedic tuning the M- and M+ reeds are tuned so as to give a resultant, perceived, pitch of M0, with a tremolo which is determined previously by the tuner/player. If the L reed is tuned at L0, then it should sound OK in combination LMM. With the L reed switched out, the MM reeds will also sound fine; I don't understand why you say "with only MM selected would arguably have double the tremolo rate". But perhaps I am missing something here?
 
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Pitch shift after tuning a reed
« Reply #17 on: January 27, 2011, 12:12:20 PM »

Never mind the theory.

In practice LM sounds horrible unless the reeds are tuned in unison (ok, exact octaves)

LMM sounds fine whether the L reeds is in unison with one of the M reeds or is somewhere between the two M reeds.  The sound has a different character of course, but not offensive to the ear like a non-unison LM.

This is my ears I'm talking about, others may perceive things differently.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Pitch shift after tuning a reed
« Reply #18 on: January 27, 2011, 12:40:04 PM »

If the L reed is tuned at L0, then it should sound OK in combination LMM. With the L reed switched out, the MM reeds will also sound fine; I don't understand why you say "with only MM selected would arguably have double the tremolo rate". But perhaps I am missing something here?

My supposition was that the M+ and M- beat with the 2nd harmonic of the L reed.
For example, with a  L reed at 220Hz , M- at 438 and M+ at 442, each is producing a 2Hz beat against the 440 2nd harmonic of the L reed. Take out the L reed and you have 338 and 442 making a 4Hz beat.

But as Theo says, never mind the theory - what's important is what it sounds like.

(Doesn't somebody have a MIDI device that enables all this to be tested without having to file metal? And we've drifted away from the thread's original pitch, for which I take my share of responsibility...)

Anahata
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Pitch shift after tuning a reed
« Reply #19 on: January 27, 2011, 01:02:50 PM »

Doesn't somebody have a MIDI device that enables all this to be tested without having to file metal?


You can simulate the effect to some extent with a couple of tone generators, but as j.w.forest has already mentioned there is some physical interaction between the reeds that a simulation would struggle to reproduce.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1] 2 3 4 5   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal