Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 [3] 4 5   Go Down

Author Topic: Pitch shift after tuning a reed  (Read 16667 times)

0 Members and 2 Guests are viewing this topic.

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Pitch shift after tuning a reed
« Reply #40 on: January 31, 2011, 06:08:00 PM »

Thanks JW, and thanks for the metal description.  .002 shim stock. What a handy source of info this forum is. Off to the hardware store....

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Pitch shift after tuning a reed
« Reply #41 on: January 31, 2011, 06:18:47 PM »

Thanks Theo and J.W.

I was just looking for that photo sequence to add it to this thread. It's either the Italian or the German technique for lifting a reed. A "Pinger" if I remember correctly. I can see that the pinger would be faster than the hooked wire technique. I'll try making a pinger tonight.

What is the recommended thickness for a pinger? I seem to remember reading .002" brass shim stock works. What thickness do you use Theo?
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Pitch shift after tuning a reed
« Reply #42 on: January 31, 2011, 06:54:37 PM »


Is the tool in question like this Theo?

http://flickr.com/gp/47089974@N02/4hF8U7

Similar-ish, bit much narrower, and without the hook.  It is shown in the first of the four pictures in my link above.
Thanks JW, and thanks for the metal description.  .002 shim stock. What a handy source of info this forum is. Off to the hardware store....

Mine is phosphor bronze, .010" thick.  .002" shim stock would be too flimsy I think.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Pitch shift after tuning a reed
« Reply #43 on: January 31, 2011, 06:57:05 PM »

Thanks for posting, Theo.  I'm assuming it's very thin metal an is passed through the slot and slide under the reed tip?  The tolerance is so tight on good reeds I wouldn't have thought that would work.

No, not passed through the slot at the side of the reed, that would risk shifting the reed off centre.  As I said its just about impossible to explain in words.  I'll see if I can do a video clip.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Pitch shift after tuning a reed
« Reply #44 on: January 31, 2011, 07:40:09 PM »

Thanks JW, and thanks for the metal description.  .002 shim stock. What a handy source of info this forum is. Off to the hardware store....

  Before you rush off, be aware that the shim stock is very thin, to prevent binding in the reed clearance. This is why I bend the small tab at the end as it hooks the reed.  There is the caution here that after some usage, the little tab can fatigue and break off, leaving a flake of brass under your reedplate, then, you will have to pull the plate. Let's see what Theo's method is. He has far more experience than me.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Pitch shift after tuning a reed
« Reply #45 on: January 31, 2011, 08:08:24 PM »

Well I manage to shoot a short video on my camera, but for some reason that I can't fathom the computer will play it back from the camera, but won't import it, so I can't save a copy to upload. 

Any suggestions?  I'm using a Panasonic Lumix DMC-T27 camera connected via USB to an iMac running OSX 10.5.8, and using iMovie 7.1.4
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Pitch shift after tuning a reed
« Reply #46 on: January 31, 2011, 08:31:33 PM »

Any chance your camera shows up as a separate drive on your desktop? If so, you may be able to open the drive up, navigate to the document, copy and save to your hard drive. I suppose the main issue then will be the format of the file.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Pitch shift after tuning a reed
« Reply #47 on: January 31, 2011, 09:56:09 PM »

Theo,

Take a look at this drawing I made and let me know if I have the process correct or not.  I've done my best at drawing what I think is the sequence of moves to get the lifter in and supporting the tongue of the reed as shown in the photos you put up today.

Photo edited to remove, um, typos... :|bl
« Last Edit: January 31, 2011, 11:18:03 PM by Telemorris »
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Pitch shift after tuning a reed
« Reply #48 on: January 31, 2011, 09:59:28 PM »

That's what I was envisioning also, Telemorris.  Awesome drawing.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Pitch shift after tuning a reed
« Reply #49 on: January 31, 2011, 10:17:21 PM »

That's it exactly. ;D
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Pitch shift after tuning a reed
« Reply #50 on: January 31, 2011, 10:31:33 PM »

I've got to try this out. It seems like it will be a great deal faster and easier than the "U" shaped wire lifter. I'm very glad this technique came up in this thread! So what is that piece of metal called? Pinger or Lifter, or are the names interchangeable?
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Pitch shift after tuning a reed
« Reply #51 on: January 31, 2011, 10:34:34 PM »

Hohner call it a reed lifter. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Pitch shift after tuning a reed
« Reply #52 on: January 31, 2011, 10:43:59 PM »

Hohner call it a reed lifter.  

Say Theo, does the tool fit all reeds, or is it necessary to have a couple of sizes? And BTW, thanks so much.

Added: And thanks to Telemorris for the great illustration. How very un-technical of you to simply use a pencil  ;D
« Last Edit: January 31, 2011, 10:45:45 PM by j.w.forrest »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Pitch shift after tuning a reed
« Reply #53 on: January 31, 2011, 10:56:29 PM »

This is the smaller of two sizes,  shown in the first picture here
The top one is the a well worn version of the one in the pictures a few posts back.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Pitch shift after tuning a reed
« Reply #54 on: January 31, 2011, 11:00:07 PM »

In this case, a pencil was far faster and easier than trying to deal with drawing all of that in a graphics program. The drawing took me 15 minutes, thinking about it added another 10 minutes (all on my lunch hour). My very nice graphics program at home would have taken an hour and much cursing and swearing and I wouldn't have gotten an answer to whether it's the right process until tomorrow since Theo is probably about to head for bed (or a beer).

I suspect Theo had a "techno joy" experience this morning when he tried to make a video of this technique. It makes me think of Eddie Izzard's sketch about getting his printer to talk to his computer. Did you ever figure out how to separate the file from the camera Theo?
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Pitch shift after tuning a reed
« Reply #55 on: January 31, 2011, 11:03:01 PM »

Did you ever figure out how to separate the file from the camera Theo?
Nope. Apparently Panasonic created a new video file format for this camera, and iMovie has yet to catch up.
But I did discover that I could operate the reed lifter with my left hand while operating the camera with my right.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Pitch shift after tuning a reed
« Reply #56 on: January 31, 2011, 11:12:23 PM »

Theo, on the very smallest reeds on a higher key accordion, any chance of bending the reed tips doing this?

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Pitch shift after tuning a reed
« Reply #57 on: February 01, 2011, 12:10:14 AM »

You can make a tool like that out of thin brass. The pinger that CGM sells is good once trimmed down with scissors. I haven't tried it on the highest reeds, but with a bit of practice it isn't difficult to lever up the bigger reeds and then slide it along to act as a shim. One tool, one hand!
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Pitch shift after tuning a reed
« Reply #58 on: February 01, 2011, 01:01:25 AM »


Mine is phosphor bronze, .010" thick.

Is Phosphor bronze stronger than brass then?
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Pitch shift after tuning a reed
« Reply #59 on: February 01, 2011, 01:07:45 AM »

Telemorris: exactly right, except that it generally requires a bit more wiggling. I'm very conscious that being inexperienced I could probably bend a reed, so I go very carefully. Have a go, it isn't that hard.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog
Pages: 1 2 [3] 4 5   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal