Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 3 [4] 5   Go Down

Author Topic: Pitch shift after tuning a reed  (Read 16752 times)

0 Members and 1 Guest are viewing this topic.

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Pitch shift after tuning a reed
« Reply #60 on: February 01, 2011, 04:49:26 AM »

That sounds good. I'll have to find some. I've been experimenting with some brass shim stock, .005 for the lifter then using some thicker stuff shaped appropriately for getting into the chamber. I really like this technique - much, much faster to get the tongue up and supported. I still need to get  some lifters of the proper thickness and stiffness.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Pitch shift after tuning a reed
« Reply #61 on: February 01, 2011, 07:56:12 AM »


Mine is phosphor bronze, .010" thick.

Is Phosphor bronze stronger than brass then?

Yes, tougher and more springy.  I'm sure brass would be ok, but it would not last so long.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Pitch shift after tuning a reed
« Reply #62 on: February 01, 2011, 01:46:30 PM »

Might get some phosphor bronze soon then. I am aware that my brass pinger won't last forever!
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Pitch shift after tuning a reed
« Reply #63 on: February 01, 2011, 04:16:47 PM »

Here in the US, I'm only finding bronze of different types, yes, but none labeled "phosphor." Is phosphor bronze used in a particular industry?
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Pitch shift after tuning a reed
« Reply #64 on: February 01, 2011, 04:47:54 PM »

Here in the US, I'm only finding bronze of different types, yes, but none labeled "phosphor." Is phosphor bronze used in a particular industry?

Quite widely used in marine applications. Perhaps check your nearest large town or city for a metal supplier that vends to small fab shops, or ask your local metal guy, welder, or marine repair/supply if they can scare up a small piece.
Logged

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Pitch shift after tuning a reed
« Reply #65 on: February 01, 2011, 04:56:26 PM »

I finally connected with a metallurgical company and found out that phosphor bronze goes by the designation, "Bronze 510." I'll find it now. Thanks for the suggestion though. I'll try the local marine shop.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Pitch shift after tuning a reed
« Reply #66 on: February 01, 2011, 05:33:52 PM »

Here in the US, I'm only finding bronze of different types, yes, but none labeled "phosphor." Is phosphor bronze used in a particular industry?

Telemorris, check McMaster-Carr.  I think here some may call it something else.  McMaster has it, but you have to buy a roll of it for $21.  Unless I can find some at a hardware store tomorrow, I will be buying a  roll.  If you want, maybe we can split the roll.

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Pitch shift after tuning a reed
« Reply #67 on: February 01, 2011, 05:45:41 PM »

I looked at McMaster Carr and found a sheet product "Ultra Strength Bronze Alloy, Spring tempered." .010, Product # 9052K441. Sounds just perfect, $16.99. Dimensions 6" x 12" I'll split one sheet with you if you like. It's better than getting 25 feet of the stuff.

Let's take the rest of this exchange off line.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Pitch shift after tuning a reed
« Reply #68 on: February 01, 2011, 09:09:29 PM »

What's the best way to cut the bronze sheet stock? Won't shears bend the sheet stock? What have you used Theo?
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Pitch shift after tuning a reed
« Reply #69 on: February 01, 2011, 11:40:26 PM »

What's the best way to cut the bronze sheet stock? Won't shears bend the sheet stock? What have you used Theo?

I buy them from Hohner, ready cut.

BTW, I checked the thickness again and its closer to .013", prob actually 0.3mm
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Pitch shift after tuning a reed
« Reply #70 on: February 01, 2011, 11:48:22 PM »

Blafleur and I are splitting the .010 spring tempered bronze - he's already turned in the order. I'll let you know how it works out once I've started working with it. Sorry for the question about how to cut. I've got my head in my work and didn't make a connection. A hacksaw with the appropriate blade and a sheet of plywood as backing should do the trick. Then use some of the fine sandpaper I have to smooth out the rough edges.

Theo, do you have any graph paper handy? A photo of the lifters against graph paper would be a wonderful way of recording the dimensions. I'm curious about the taper and length of these tools. I've got enough shim stock coming that I can make three or four of different sizes (bass, tenor, alto, and soprano!)  ;D

Thanks
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Pitch shift after tuning a reed
« Reply #71 on: February 02, 2011, 12:41:28 AM »

Here's a video showing the Hohner reed lifter.  If they can be used on little harmonica reeds, I guess that answers my question on if it's safe on the littlest accordion reeds.

http://www.youtube.com/watch?v=DdVbPE9hmGQ

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Pitch shift after tuning a reed
« Reply #72 on: February 02, 2011, 12:49:22 AM »

Here's the link to Hohner's parts catalog with the reed lifters for sale, I'm assuming that's what's called "reed tuning stabiliser"? 

http://hohnerusa.com/upload/links/l_00000775_Accordio_Parts_List_Retail_2010.pdf

Telemorris, if you'd rather order premade tools, I should be able to cancel the order to McMaster.

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Pitch shift after tuning a reed
« Reply #73 on: February 02, 2011, 12:58:16 AM »


Telemorris, if you'd rather order premade tools, I should be able to cancel the order to McMaster.

Nope, keep the order in place, thanks for asking. I prefer to be able to make my own lifters in different tapers based on the size of the reed chamber opening.

The Youtube video you found is wonderful at showing support of the tongue with the lifter, even into the middle or belly of the reed. There's a related video about re-flattening your old leather valves for the harmonica, interesting process. I'll stick with new valves.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Pitch shift after tuning a reed
« Reply #74 on: February 02, 2011, 01:02:25 AM »

That's what I was thinking, too.  I like making my own tools.

Same here on the valves.  Reflattening valves is short term at best.

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Pitch shift after tuning a reed
« Reply #75 on: February 02, 2011, 01:10:15 AM »

Doesn't make sense to reuse valves that have failed when you've got 42 on the treble side alone that are sealed in with wax. Get it right the first time.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Pitch shift after tuning a reed
« Reply #76 on: February 02, 2011, 09:55:59 AM »

Theo, do you have any graph paper handy? A photo of the lifters against graph paper would be a wonderful way of recording the dimensions. I'm curious about the taper and length of these tools. I've got enough shim stock coming that I can make three or four of different sizes (bass, tenor, alto, and soprano!)  ;D

Thanks

Here is a photo on 1/4" grid.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Pitch shift after tuning a reed
« Reply #77 on: February 02, 2011, 11:29:00 AM »

Thanks, Theo, that helps.

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Pitch shift after tuning a reed
« Reply #78 on: February 02, 2011, 03:40:08 PM »

Just what I need! Thanks Theo.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Pitch shift after tuning a reed
« Reply #79 on: February 02, 2011, 06:21:53 PM »

That's it exactly. ;D

Well I'll go to the foot of our stairs!

The last time I visited Theo's workshop was in June 2009 and I was treated to a demonstration of lifting inner reeds and I have to say it looked pretty straightforward. It was some time before I was able to get my hands on the Hohner tools so it was three or four months later that I had a go at bringing out a reed using old plates from a scrapped accordion. No chance, I mean not even close, all I succeeded in doing was bending the reed lifter. I've tried many times since to no avail, I even developed a way of going in through the reed block port and pushing reeds out through the plates but it's a bit of a performance.

Today I read this thread, do exactly what is shown in Telemorris' superb little sketch and out pops a reed at the second attempt! I spent the rest of my lunch break rummaging through a box of old reed plates happily flipping reeds of all sizes including bass reeds with a big lump of brass on the tip.  ;D
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)
Pages: 1 2 3 [4] 5   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal