Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: De-clubbing the Eb/Bb chord  (Read 2347 times)

0 Members and 1 Guest are viewing this topic.

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
De-clubbing the Eb/Bb chord
« on: January 27, 2011, 01:00:02 AM »

I've finally decided to de-club the Eb/Bb chord on my Erika C/F which means changing the Eb to Bb.  The Eb chord reeds are pitched higher than the Bb chord reeds so I should be able to apply solder to the tips to lower the pitches appropriately. That seems straightforward to me.  The Eb bass reeds, however are pitched lower than the Bb bass reeds which means I would have to raise them three and a half tones!!!  I would very much like to hear from anyone who has done this conversion as to how they did it.  Are the bass reeds big enough and heavy enough to grind away three and half tones of metal to reach Bb?
Logged

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: De-clubbing the Eb/Bb chord
« Reply #1 on: January 27, 2011, 02:47:48 AM »

The Eb bass reeds, however are pitched lower than the Bb bass reeds which means I would have to raise them three and a half tones!!!  I would very much like to hear from anyone who has done this conversion as to how they did it.  Are the bass reeds big enough and heavy enough to grind away three and half tones of metal to reach Bb?

Wow...why wouldn't you just get some Bb bass reeds? I got the hi and lo bass Bb (both ways) for $2.00 per plate (used), and they are zinc plates like the originals. Even aluminum plates would be fine. Since C/F is a fairly common tuning, I think new or used reeds would be easily acquired.
Logged

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: De-clubbing the Eb/Bb chord
« Reply #2 on: January 27, 2011, 12:04:06 PM »

That is my back up plan.  I would like the experience of lowering the pitch of a reed with solder so that is partly the reason.  Also, the reeds in this accordion are particularly nice zinc H reeds and I would like to keep the originals if possible even though they are only bass reeds.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: De-clubbing the Eb/Bb chord
« Reply #3 on: January 27, 2011, 12:29:16 PM »

Quite understandable, some (not all!) old Hohner bass reeds are magnificent.

Your low Eb reed will probably have a brass or solder weight at the tip.  Removing that might get you up to Bb.  But beware the lowest reeds are sometimes filed to a thinner profile than the higher ones, so you might find that the response was different from the existing Bb reed.  There is a certain amount of judgement require to decide how much you can get away with.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
Re: De-clubbing the Eb/Bb chord
« Reply #4 on: January 27, 2011, 12:31:52 PM »

That is my back up plan.  I would like the experience of lowering the pitch of a reed with solder so that is partly the reason.  Also, the reeds in this accordion are particularly nice zinc H reeds and I would like to keep the originals if possible even though they are only bass reeds.

 I have done this to one or two of my own old boxes in the past, but I think it leaves the high bass reed a bit too thin, making it unstable under pressure. In my opinion it would be best to replace at least the high bass reed with one of a similar type. Going from memory the chord is no problem as there are only two reeds to lower - G to F and Eb to D. This can be done with solder on the tips or filed.

Martyn
« Last Edit: January 27, 2011, 01:53:38 PM by martyn »
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: De-clubbing the Eb/Bb chord
« Reply #5 on: January 27, 2011, 05:29:36 PM »

I thought of raising the Eb bass to an F which would be the fifth of the Bb chord so I would have a "I" on the pull and a "V" on the push for the Bb chord.  I wonder how useful that would be?
Logged

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: De-clubbing the Eb/Bb chord
« Reply #6 on: February 04, 2011, 11:19:04 PM »

A little follow up on this:  The Eb chord reeds were very easy to convert to Bb.  A little dollop of solder on the tips of the Eb and G reeds to bring them down to D and F respectively was easy as pie.  I tried putting solder on the low Bass Eb reed to bring it down to Bb (an octave below the draw Bb bass) but it was too low to be practical and didn't work so I raised the Eb bass to an F which gives an inversion of the Bb chord with the fifth in the bass.  This seems to work fine.  I still may replace those lovely zinc H reeds with aluminum T bass reeds but first I'm going to play it awhile to see how it works with the fifth in the bass.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal