Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Pallet, spring or both?  (Read 1301 times)

0 Members and 1 Guest are viewing this topic.

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Pallet, spring or both?
« on: January 29, 2011, 03:08:52 PM »

Hi all,

I have a slight problem on my Bouebe. One of the pallets has stopped seating properly (I think), I can hear air rushing out of it when I squeeze. Once in a blue moon, it jams open enough to allow the reeds to sound. This will go away in a bit, or else taking the grille off and depressing the pallet will do the job. I am intending to reseat the offending pallet, but I was wondering whether it was likely to be a problem with the spring as well or instead of. If the spring wasn't springing back as well as it should do, or there was friction in the mechanism or something then this might have the same effect. Needless to say, I have no particular wish to dissemble the mechanism (well, I do, but not on my gigging box!). Advice welcome.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Pallet, spring or both?
« Reply #1 on: January 29, 2011, 03:12:45 PM »

If it is the Bouebe with stepped keyboard then the first thing to suspect is that the wooden lever is not moving freely on the axle rod.  Second suspect is a weak spring.  You may be able to tell from the feel of the button as it moves. In either case the solution requires that you pull out the axle rod to get access to the root cause.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Pallet, spring or both?
« Reply #2 on: January 29, 2011, 03:27:22 PM »

It's a flat keyboard, not stepped. And I had a feeling you'd say that :-\
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: Pallet, spring or both?
« Reply #3 on: January 29, 2011, 03:34:26 PM »

Now, you've located the pallet that causes the problem. As you say, it could be a loose spring, or a non-sealing fit of the pallet. Trying around the edges with a piece of cigarette paper will sometimes reveal if the pallet needs to be removed and re-fastened. In any case, it only takes a few minutes to pull it off and glue it back in place, so it might be fixed doing that.

I use a dynamometer to test the spring action, if I suspect one being to stiff or too weak. A bit faster than feeling your way around it, but it sure is possible to do it by feel as well. A slight bend to the spring might give you tension enough to get a proper seal anyways. I've had the problem of a couple of weak springs on my own saltarelle (back when I played 'modern' boxes), and have experienced the same with two other saltarelles.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal