Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Is that gaffa tape on my bellows?  (Read 5303 times)

0 Members and 1 Guest are viewing this topic.

Matt Langley

  • Member
  • *
  • Offline Offline
  • Posts: 44
Is that gaffa tape on my bellows?
« on: February 05, 2011, 01:47:43 PM »

Hi

I recently bought a 'cut and shut' melodeon off ebay - the bass end and body of a standard pokerwork with the treble workings of a hohner one row 4 stop inside.  Cosmetically it is a bit of a wreck but it plays ok and sounds fantastic to me!

Anyway, it looks to me like the bellows have had their edges taped with gaffa tape (black and a bit rubbery on the surface with a sort of fabric layer underneath and tacky white glue).  In places where the tape has dried out and lifted off it look like gaffa from the underside too.  

The bellows work ok and seem pretty airtight, the two problems are 1. I dont like how it looks and 2. the glue from the tape is leaking out under the edges and makes the folds of the bellows stick together.

Am I mistaking a 'legit melodeon bellows product' for gaffa tape by mistake (I dont think I am).  Alternatively, is using gaffa tape on your bellows a recognised repair method?

Next, since i dont like it particularly, I was wondering about stripping the black tape off and replacing it.  Have seen other advice on this on the forum.  The existing tape has dried out and is coming off in some places while in others seems to be still well stuck.  Is this one of those jobs you start and then regret it?  would I save myself much time and trouble by just getting a replacement set of bellows instead?

Interested to hear if anyone else has dealt with this before and what your experiences were - before I jump in with both feet and regret it.

Matt
Logged

tedrick

  • Guest
Re: Is that gaffa tape on my bellows?
« Reply #1 on: February 05, 2011, 02:52:34 PM »

I've never re-taped bellows on a box - but this sounds like a good learning project -

sounds like the previous owner was a good DIY'er - you can probably get the desired results with real bellows tape -- do you have a shop or supplier nearby or would you need to order the tape from somewhere?

take lots of pics/vids before and during the repair/resto process --
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Is that gaffa tape on my bellows?
« Reply #2 on: February 05, 2011, 02:56:30 PM »

Bellows taping is easy enough if a little tedious. Tape can be obtained from Charlie Marshal , my new preference for glue is this from Axminsters although I have used Charlie's Special Glue.

Hints and tips here
« Last Edit: February 05, 2011, 02:58:20 PM by Lester »
Logged

HallelujahAl

  • Guest
Re: Is that gaffa tape on my bellows?
« Reply #3 on: February 05, 2011, 02:59:42 PM »

Agree on both counts with Lester - Charlie Marshall's your guy - and the bellows tape is quite cheap. Some folk just use PVA, but I think it's a complete nightmare so go with Lester's recommendation.
AL
Logged

savantuk

  • A Shropshire lad
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 401
  • Location - Whitchurch, Shropshire.
Re: Is that gaffa tape on my bellows?
« Reply #4 on: February 05, 2011, 03:06:24 PM »

Just looked at your bellow tutorial Lester.  Very good, and really excellent result!
Logged
Regards,

Doug

Castagnari Tommy D/G ~  Castagnari Max in C ~ Irish Dancemaster converted toy in C with Cagnoni reeds

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Is that gaffa tape on my bellows?
« Reply #5 on: February 05, 2011, 03:08:00 PM »

Agree on both counts with Lester - Charlie Marshall's your guy - and the bellows tape is quite cheap. Some folk just use PVA, but I think it's a complete nightmare so go with Lester's recommendation.
AL

My recommendation was to use PVA so I am a little confused, but the PVA I recommended is high tack and quick setting. I agree with Al that ordinary PVA is not a good idea.

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Is that gaffa tape on my bellows?
« Reply #6 on: February 05, 2011, 03:24:41 PM »

The bellows work ok and seem pretty airtight, the two problems are 1. I dont like how it looks and 2. the glue from the tape is leaking out under the edges and makes the folds of the bellows stick together.

Problem with any self adhesive tape is that the glue is not meant to dry (and oozes out, except where it is exposed to air and dust and then it stops adhering).
This should also mean that it can be removed relatively easily and replaced with "proper" tape to cure problem 1.
A stop-gap cure for problem 2. can be achieved by cleaning off the worst of the adhesive from the outside of the tape with solvent and dusting with talc to kill any stickiness on the edges.
Worst bit of "cosmetics" appears to be the tape adjacent to the frames. This would have best been left alone, unless it had to be retaped because you have to reduce the width of the tape and "persuade" one edge into the crackto make it look half decent.
Logged

HallelujahAl

  • Guest
Re: Is that gaffa tape on my bellows?
« Reply #7 on: February 05, 2011, 05:24:31 PM »

Quote
the PVA I recommended is high tack and quick setting
Yep - sorry for the confusion - it's the high tack stuff that's needed in my experience.
Logged

Matt Langley

  • Member
  • *
  • Offline Offline
  • Posts: 44
Re: Is that gaffa tape on my bellows?
« Reply #8 on: February 05, 2011, 05:36:02 PM »

Thanks for the advice and the pointers to Lester's photo gallery - very useful.

Unfortunately I dont think retaping is going to be an option.  After reading the replies I tried very carefully to remove some of the tape that was well stuck down and discovered the tacky glue had soaked into the cardboard beneath making it very soft and pulling it away in chunks.  I gave up after very gingerly pulling off approx. 2cms of tape and making 2 small holes through the cardboard underneath (I have stuck everything back down so it still operates fine - phew).  I am hesitant to soak the tape off or anything like that as I suspect it will only make the cardboard even more soggy and I will end up with papier mache! 

Which leads me to think I should look at a new (or serviceable second hand) set of bellows.  Any suggestions on where I might source them from?

Matt 
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Is that gaffa tape on my bellows?
« Reply #10 on: February 05, 2011, 06:20:51 PM »

Yes, but in my experience it's almost always possible to remove old tape without serious damage. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Is that gaffa tape on my bellows?
« Reply #11 on: February 05, 2011, 07:37:05 PM »

Thanks for the advice and the pointers to Lester's photo gallery - very useful.

Unfortunately I dont think retaping is going to be an option.  After reading the replies I tried very carefully to remove some of the tape that was well stuck down and discovered the tacky glue had soaked into the cardboard beneath making it very soft and pulling it away in chunks.  I gave up after very gingerly pulling off approx. 2cms of tape and making 2 small holes through the cardboard underneath (I have stuck everything back down so it still operates fine - phew).  I am hesitant to soak the tape off or anything like that as I suspect it will only make the cardboard even more soggy and I will end up with papier mache! 

Which leads me to think I should look at a new (or serviceable second hand) set of bellows.  Any suggestions on where I might source them from?

Matt 

At the risk of sounding patronising, how are you trying to pull the tape off?
If you try to pull it away "at right angle" from the folds it will try to bring the paper with it, because you are trying to break such a large area.
Usually, if you lift the end and pull the tape "back on itself" along the fold it will come away without causing much damage. Bit like the difference in rolling socks off, rather than yanking them by the toe ;D
(This does not work with original paper "tape" but does with calico which is nearer to your gaffa tape in strength.)
Obviously wetting the tape would be an absolute waste of time if you are dealing with synthetic adhesive.
Question for those who advocate the use of PVA for retaping - how difficult is it to remove the tape next time - or will you worry about that when the time comes?
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Is that gaffa tape on my bellows?
« Reply #12 on: February 05, 2011, 07:42:51 PM »

Question for those who advocate the use of PVA for retaping - how difficult is it to remove the tape next time - or will you worry about that when the time comes?

Since the only bellows I have had to retape have been at least 20 years old and the tape I use is much better quality so should last far longer I don't believe it to be a problem

Matt Langley

  • Member
  • *
  • Offline Offline
  • Posts: 44
Re: Is that gaffa tape on my bellows?
« Reply #13 on: February 05, 2011, 10:49:34 PM »

Thanks all

Encouraged by all the comments above I have had another go and managed to get 1 1/2 runs of tape off the short, top edge of the bellows without doing too much damage.  

The bellows seem to be constructed in three layers (ignoring the tape and metal corners) outside in 1. a thinner layer of what looks like red / orange texturised paper 2. a joint at each corner that look like leather? and 3. an inner layer of cardboard.  

The red paper layer is already missing or torn in a number of places and that damage clearly predates the addition of the gaffa tape.  peeling away the gaffa tape however carefully seem to take a bit more of this layer with it.  However, the corners and the cardboard layer all seem intact and appear undamaged.

Is there any reason why I cant replace this outer layer (the red paper layer)?  If it is ok to do so is there a special sort of paper or material I should use?  Also, should I be trying to remove all the existing red paper first or would it be ok to glue a new layer over the top?  Any suggestions for what sort of glue?...

I am now having all sort of arty thoughts about customising the box with some outrageous design in the folds of the bellows - maybe pink paisley like one of those Telecasters :)

Thanks for all the advice

Matt  

Logged

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Is that gaffa tape on my bellows?
« Reply #14 on: February 05, 2011, 11:50:32 PM »

The red paper layer is already missing or torn in a number of places and that damage clearly predates the addition of the gaffa tape.  peeling away the gaffa tape however carefully seem to take a bit more of this layer with it.  However, the corners and the cardboard layer all seem intact and appear undamaged.

Is there any reason why I cant replace this outer layer (the red paper layer)?  If it is ok to do so is there a special sort of paper or material I should use?  Also, should I be trying to remove all the existing red paper first or would it be ok to glue a new layer over the top?  Any suggestions for what sort of glue?...
Looks as though you have inherited some of your problems. So long as it is only happening from underneath the tape, losing some of the lining paper should not cause a problem.
Attempting to remove the red paper would not be a good idea!
Recovering could be an option but to do it properly the metal corners need to come off, unless you tailor round them. Removing them is not difficult - replacing them is.
If you can get the existing tape off without damaging the corners of the lining paper you should be able to hide much of any other damage by using 25mm tape rather than the normal 19mm stuff.
Logged

HallelujahAl

  • Guest
Re: Is that gaffa tape on my bellows?
« Reply #15 on: February 06, 2011, 08:10:51 AM »

Quote
I am now having all sort of arty thoughts about customising the box with some outrageous design in the folds of the bellows - maybe pink paisley like one of those Telecasters :)
Matt, Charlie Marshall now does a range of fancy bellows papers including some very nice pink stuff!
Logged

pete /acorn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 930
  • .Cast Trilly
    • Acorn Instruments
Re: Is that gaffa tape on my bellows?
« Reply #16 on: February 06, 2011, 08:55:08 AM »

Hi,
Re glue for fixing tape,has anyone tried Copydex.

Pete
Logged
Acorn Instruments are specialist retailers of Castagnari Instruments,and have an extensive stock of new instruments on the shelf for prompt delivery in standard layouts however these can easily be changed to customers special requirements,we have over 600 reeds in stock
 We also have the largest stock in the UK of  pre loved melodons all fully serviced,and with 12 months warranty
UK and international customers catered for
www.acorninstruments.co.uk

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Is that gaffa tape on my bellows?
« Reply #17 on: February 06, 2011, 10:02:17 AM »

Hi,
Re glue for fixing tape,has anyone tried Copydex.

Pete

Not permanent enough in my opinion.

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Is that gaffa tape on my bellows?
« Reply #18 on: February 06, 2011, 10:21:23 AM »

Thanks for the advice and the pointers to Lester's photo gallery - very useful.

Unfortunately I dont think retaping is going to be an option.  After reading the replies I tried very carefully to remove some of the tape that was well stuck down and discovered the tacky glue had soaked into the cardboard beneath making it very soft and pulling it away in chunks.  I gave up after very gingerly pulling off approx. 2cms of tape and making 2 small holes through the cardboard underneath (I have stuck everything back down so it still operates fine - phew).  I am hesitant to soak the tape off or anything like that as I suspect it will only make the cardboard even more soggy and I will end up with papier mache! 

Matt 


Depending on the formulation of the adhesive, it might be worth trying Lakeland Plastics (just "Lakeland", now, I think) Sticky Stuff Remover, designed to remove recalcitrant sticky labels.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

mglamb

  • Guest
Re: Is that gaffa tape on my bellows?
« Reply #19 on: February 06, 2011, 02:18:54 PM »

Try heating the tape with a hot air gun (low setting) or a hair dryer to soften the adhesive.
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal