Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: How flat can reeds go?  (Read 1639 times)

0 Members and 1 Guest are viewing this topic.

melod-ian

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 295
How flat can reeds go?
« on: February 19, 2011, 09:38:47 AM »

I noticed a reed was sounding slightly off key last week,  by the weekend it had dropped a semitone..I just wondered how flat a reed can go?.. is there a stopping point ?

It hasn't got any flatter now, I did think I'd see if it dropped by a tone i wouldn't necessarily need to replace it  8)
Logged
3 x Acadian's (C,Bb,A),
Hohner corona iiir (GCF)
PS Black Pearl (DG)
and the old hohner erica (DG)

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: How flat can reeds go?
« Reply #1 on: February 19, 2011, 10:23:33 AM »

I noticed a reed was sounding slightly off key last week,  by the weekend it had dropped a semitone..I just wondered how flat a reed can go?.. is there a stopping point ?

It hasn't got any flatter now, I did think I'd see if it dropped by a tone i wouldn't necessarily need to replace it  8)

If its gone flat by a semitone it is almost certainly cracked and will break very soon as you continue to play it.  It will need to be replaced.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: How flat can reeds go?
« Reply #2 on: February 19, 2011, 12:44:49 PM »

Could there be something on the reed or stuck in the gap?

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: How flat can reeds go?
« Reply #3 on: February 19, 2011, 01:11:06 PM »

Could there be something on the reed or stuck in the gap?

Possible, but not so likely.  Tiny objects can get stick near the root of the reed but this usually results in a higher pitch because the effective length of the reed is reduced.   More often something stuck in the reed gap will stop it speaking at all.

I'm not saying that a drop in pitch couldn't have another cause, but if the pitch drops gradually and gets flatter the more you pay its the classic symptom of a cracked reed. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

HallelujahAl

  • Guest
Re: How flat can reeds go?
« Reply #4 on: February 19, 2011, 03:37:16 PM »

Agreed - the reed's a goner once it drops that flat as it is more than likely suffering from severe metal fatigue.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: How flat can reeds go?
« Reply #5 on: February 19, 2011, 04:05:52 PM »

Prime example is my Castagnari Tommy whose G chord was horrid til I tuned the G reed, then it went horrid til I tuned the G reed, then it went  horrid til I tuned the G reed, then I noticed the crack in the reed by holding it up to a bright light. I was quite surprised how long it lasted between each tune but it did get to be less and less.

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: How flat can reeds go?
« Reply #6 on: February 19, 2011, 04:27:21 PM »

This happened to two different bass reeds in a club I have. The second time I was privileged to experience the death of the reed in the middle of playing a note - the tone dropped like a slide whistle until the reed snapped.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal