Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 [3] 4   Go Down

Author Topic: wooden finger board for pokerwork  (Read 18322 times)

0 Members and 1 Guest are viewing this topic.

RickC.

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 133
Re: wooden finger board for pokerwork
« Reply #40 on: December 27, 2011, 05:00:05 PM »

I think Peter deserves a bit more sympathy on this.  Setting up to make a replacement Hohner fingerboard is not a trivial task or several people would have had then in production by now. 

Sure, no offense intended.  Just checking back in on this.
Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: wooden finger board for pokerwork
« Reply #41 on: December 29, 2011, 12:58:41 AM »

Hi all ,
I was repairing (slowly) a Hohner 1040  the Finger bd. was missing pieces between the holes.
Common I assume ? Any way made the first one out of solid cherry good fit and spacing wasn't to bad but
I elongated the holes to much then I saw this thread where Theo mention removable back so thought I would just practice with one I made to see if it could be modified to have removable back so I ripped top to bottom then added back 1/8 " filler strip keeping front and back the same thickness. Then it could use concave groove on top where the two pieces meet.


Then I tried to repair existing finger bd. by making an insert which I liked because I could keep
the decoration of the original and add some interest with walnut or other wood type to insert
this approach needs some supports installed in the mortise as shown in pics. (not sure if this could be adapted to a two row this method does need supports and I don't have one.) and screws on end to hold in place . pretty easy to do  if I pattern a few inserts at a time then mortise out original and drill holes I can even use tick mark on bottom of finger bd. to align holes.
I could repair some for people if there was enough interest.
I live in the US. so shipping could pose a problem and could not do it for less than cost of the replacement units plus shipping.
 
Michael
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: wooden finger board for pokerwork
« Reply #42 on: December 29, 2011, 01:02:45 AM »

Here is the pics. of insert installed in original . Its not screwed in or sanded smooth yet.
Couldn't fit this in one post sorry.

Michael
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Gandy

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 407
Re: wooden finger board for pokerwork
« Reply #43 on: December 29, 2011, 09:37:28 AM »

I made a couple of prototypes.  One was cut from a solid block, drilled from above for the buttons then routed out from underneath to provide enough clearance for the mechanism.  The bottom is rebated into the block and screwed on from underneath.   Made out of nice wood I think that design would work well, with the fasteners only visible from the back.
Logged
Tony S

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: wooden finger board for pokerwork
« Reply #44 on: December 29, 2011, 03:48:08 PM »

I like the cherry fingerboard!  Not that there's anything wrong with the insert, but the whole replacement is very attractive.

It reminded me that I once harboured the ambition to make a whole keyboard and action - a wooden action to fit on a Pokerwork.  I almost feel tempted to do it, seeing what others have achieved!

Rob.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: wooden finger board for pokerwork
« Reply #45 on: December 29, 2011, 05:36:22 PM »

Here is the pics. of insert installed in original . Its not screwed in or sanded smooth yet.
Couldn't fit this in one post sorry.

Michael

I think I have a new old stock spare one of those!   Could have saved you some work.  :D
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: wooden finger board for pokerwork
« Reply #46 on: December 29, 2011, 08:10:46 PM »

I had to repair an identical fingerboard a couple of years ago. I removed the whole upper part, made a replica with my laser (incl. the ornament) and glued it back on. I still have that CorelDraw program. Those of you who don't mind doing the removing, gluing and varnishing themselves are welcome to pm me.
Logged

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: wooden finger board for pokerwork
« Reply #47 on: December 30, 2011, 03:47:17 AM »

True,

It is not a trivial task.  I spent a great deal of time making several prototypes and finally ended up with one that could be used on pokerworks and Ericas. It needed only minor tweaking to hole size and spacing from the "soundboard". 

This prototype was sent to Michael Usui of Dancemaster accordeons for his approval and never returned. It has now been three years.
When and if he does this , I will be pleased to put them into production.
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: wooden finger board for pokerwork
« Reply #48 on: December 31, 2011, 06:19:13 PM »

I tried my hand at this the other day for a customer.
http://www.flickr.com/photos/26639011@N06/6607764723/in/photostream
I made the deck out of model aircraft birch ply then laid a piece of cherry over it along with some trim I had around.
 You can remove the deck so it is easy to put padding stops behind the buttons.
The oval holes were the mot time intensive part.
 I used the old keyboard as a base and cut off the deck. I have a pattern now so the next would be a bit easier.

Kimric
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: wooden finger board for pokerwork
« Reply #49 on: December 31, 2011, 06:24:42 PM »

As with the unit described by K Smythe..
Aircraft ply was used... both the front and rear panels were removable. No internal bridge supports were needed.
Padding a snap. Access for adjustment or repair from front or back.
The design was such that it looked appropriate on any style Hohner , old or new.
This fingerboard also had a thumbgroove.

Maybe it's in the works in China...
Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: wooden finger board for pokerwork
« Reply #50 on: January 03, 2012, 12:33:07 AM »

I like the cherry fingerboard!  Not that there's anything wrong with the insert, but the whole replacement is very attractive.

It reminded me that I once harboured the ambition to make a whole keyboard and action - a wooden action to fit on a Pokerwork.  I almost feel tempted to do it, seeing what others have achieved!

Rob.

Rob,
I like the cherry too!   It would look good oiled up.
But I really want to the keep original  as my grandfather
gave me the box and I like the idea of touching something he and other family members once use (sentimental fool).
The only reason I really want to repair and make playable is to pass it on to my children or grandchildren???? .
I need to do valves re-wax tuning noise-control  bellows work but would be better to replace?
I think it could play pretty good if repaired the only problem I had with it "minus the poor lower octave curly valve syndrome "
was sharp egde of base end during play.
As far as making your own action I say go for it!!


Here is the pics. of insert installed in original . Its not screwed in or sanded smooth yet.
Couldn't fit this in one post sorry.

Michael

I think I have a new old stock spare one of those!   Could have saved you some work.  :D


Theo ,
Thanks for the offer but I think  I will try reuse the original. Do you think there would be enough room to make adjustments to button travel with insert?
Building a house for a living is work, tinkering in the work shop on something you enjoy is fun.
You don't happen to have a spare Paolo Soprani D D# box?  (:) that looks like it would be a nice box
and its a system of interest D on outer row half step on inner row.having only played one row not sure if I would go with D# or C#.
Michael
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: wooden finger board for pokerwork
« Reply #51 on: January 03, 2012, 07:59:50 AM »

Do you think there would be enough room to make adjustments to button travel with insert?

Yes, I have just done that on a more recent 1040, the one with black and gold finish.  I think yours would be exactly the same.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

anotherboxplayer

  • Good talker
  • **
  • Offline Offline
  • Posts: 78
Re: wooden finger board for pokerwork
« Reply #52 on: January 08, 2012, 10:23:29 AM »

Try a gunstock maker!

When I had 3 old pokerworks (but new enough boxes not to have wooden fingerboards) I had several hardwood fingerboards made for me by a gunstock maker.  He used a pantograph to copy a plastic fingerboard and gave me wonderfully accurate walnut parts which I finished off with best London gunstock oil.
Logged

Paudi

  • New Starter
  • Offline Offline
  • Posts: 2
Re: wooden finger board for pokerwork
« Reply #53 on: February 07, 2012, 06:38:25 PM »

first I would like to thank the people in charge for letting me in join this web site . this is the first evening I got a chance to look at some of the Posts  enjoying it so far. I have been making finger boards for blackdots and erica's now for a number of years I make them for our own repair man John Brosnan Killarney , martin quinn and also Benny McCarthy of the band Danu and raw bar so if I can be of any help ,I try and Keep a number of them in stock I also have a lovely black dot striped down and new finger board with slightly bigger buttons on it in which i will be selling in the coming weeks so watch out for that .
Logged

blackdot1234

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 152
Re: wooden finger board for pokerwork
« Reply #54 on: February 07, 2012, 07:00:51 PM »

  a few pictures would be great are they ready to install with padding in place for buttons?
Logged

Matthew B

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 894
Re: wooden finger board for pokerwork
« Reply #55 on: January 10, 2013, 06:04:38 PM »

Friends,
Tips, tricks, hints and suggestions on installing one of these would be much appreciated.
Thanks. 
Logged
Charter Member Presumpscot and Fore River Accordion Club

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: wooden finger board for pokerwork
« Reply #56 on: January 12, 2013, 05:13:08 PM »

Don't think installation is a big deal if you are using the old keyboard for a base like I did slide the buttons in till the clear the holes, leave the screws for the keyboard sticking out about a 1/8 inch so you can get them lined up in the holes. A new keyboard may require two people as one person should line it up, and when ready the other should drill some pilot holes for the screws.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: wooden finger board for pokerwork
« Reply #57 on: January 21, 2013, 09:51:10 PM »

"wooden finger board for pokerwork" is one of the "third rail" topics.... >:E
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: wooden finger board for pokerwork
« Reply #58 on: January 21, 2013, 09:53:19 PM »

"third rail" topics

? je non comprende

deltasalmon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1002
Re: wooden finger board for pokerwork
« Reply #59 on: January 21, 2013, 10:09:22 PM »

"third rail" topics

? je non comprende

The one's you don't want to touch?
Logged
Sean McGinnis
Bordentown City, NJ, USA
Pages: 1 2 [3] 4   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal