Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Glue for Celuloid  (Read 1556 times)

0 Members and 1 Guest are viewing this topic.

Bocsa

  • Good talker
  • **
  • Offline Offline
  • Posts: 88
Glue for Celuloid
« on: February 24, 2011, 09:19:41 PM »

The letter "I" in the word "Italia" on my 1950's paolo is peeling off! Needless to say I want to keep it, so what glue should I use to glue the aluminium back to the celuloid case? Thanks
Logged

savantuk

  • A Shropshire lad
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 401
  • Location - Whitchurch, Shropshire.
Re: Glue for Celuloid
« Reply #1 on: February 24, 2011, 09:46:52 PM »

I suspect it may have been stuck on with double sided tape.  You could get a bit from a car bodyshop - very strong.

If not, I would use Evo stick. as it can be removed without damaging surface.  Superglue or epoxy are, I think, too permanent.

Theo or Rees may know a trick of the trade?
Logged
Regards,

Doug

Castagnari Tommy D/G ~  Castagnari Max in C ~ Irish Dancemaster converted toy in C with Cagnoni reeds

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Glue for Celuloid
« Reply #2 on: February 24, 2011, 09:57:06 PM »

The trade way of sticking celluloid is to use celluloid dissolved in acetone.  This material will soften the surface of the celluloid and works as a solvent cement.   The solvent in Evo stick may do the same.  For simplicity I would use a contact adhesive like Evo-Stik, but take care not to let it spread, because I think it will mark the celluloid if you have to clean off surplus glue.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Glue for Celuloid
« Reply #3 on: February 24, 2011, 10:46:27 PM »

I'd do as follows: put your "I" where you want it to go, define this spot with small pieces of masking tape so that you know exactly where and how the letter has to be stuck. Soak a piece of even cloth with acetone, let the letter rest on it for a couple of seconds, then place it (using a pair of tweezers) on the marked spot, exert slight pressure and remove the tape after a short while. Even the smallest amount of acetone in the wrong place will leave visible marks on the celluloid, and they are not easily removed! This method will minimize this danger. Contact adhesive won't work.
« Last Edit: February 24, 2011, 10:50:59 PM by diatonix »
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal