Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Reed swap or re-tune for volume?  (Read 5044 times)

0 Members and 1 Guest are viewing this topic.

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Reed swap or re-tune for volume?
« Reply #20 on: March 09, 2018, 01:07:39 PM »

Well, it's nice to get something right for a change  (:)
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Jeremy Burnett

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 116
Re: Reed swap or re-tune for volume?
« Reply #21 on: March 09, 2018, 03:18:10 PM »

Does a Corso sound similar to the MMM boxes being discussed? I have one of the "pokerwork" type in Bb/Eb and like the sound so much I was wondering how one in C/F would be. Corsos are easier to come by.
Logged

vanman

  • Member
  • *
  • Offline Offline
  • Posts: 13
Re: Reed swap or re-tune for volume?
« Reply #22 on: March 09, 2018, 05:12:05 PM »

Can anyone tell me where I can buy these HARMONIKA Czech reeds. Thanks, Brian.
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Reed swap or re-tune for volume?
« Reply #23 on: March 09, 2018, 06:25:10 PM »

Logged

Cag

  • Member
  • *
  • Offline Offline
  • Posts: 44
Re: Reed swap or re-tune for volume?
« Reply #24 on: March 14, 2018, 07:19:49 PM »


In contrast with Rob2Hook's engine tuning analogy, where increasing the airflow is definitely the object of the exercise, making the holes bigger in a melodeon doesn't significantly increase the airflow, because the reed is already by far the biggest restriction. What widening or smoothing the air hole does to make it louder is provide a less sound-absorbent path for the sound to make its way from the reed to the outside air.
What worries me about this is the assumption that the sound path follows the air path. If it did, then how different would the sound be for draw reeds compared with push reeds?
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Reed swap or re-tune for volume?
« Reply #25 on: March 14, 2018, 07:33:42 PM »

Ooooer! That's a very good point, surely?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed swap or re-tune for volume?
« Reply #26 on: March 14, 2018, 07:40:41 PM »

Well the draw and push reeds are right beside each other in the same air flow.  There are two differences I can think of.  One is the position of the valve, the other is the direction of air flow. But in practice any piano accordion will demonstrate that the sound of the push and pull reeds are indistinguishable.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal