Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Reed swap or re-tune for volume?  (Read 5028 times)

0 Members and 1 Guest are viewing this topic.

rileycat

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 429
Reed swap or re-tune for volume?
« on: February 27, 2011, 08:18:24 PM »

I have a 1930's (I think), pokerwork-sized black Hohner with 3 voice treble - MMM - and a great bass end. I want it for outdoor playing and wondered if there may be extra volume available either through "wetting" the tuning (its currently in gentle tremolo) or in substituting some top-end Italian reeds, or both? Its already a D/G and the bass end is really strong and full, but the treble could be a bit more "forceful", if you know what I mean!? I've no idea what Italian reeds would do, but I have a Savoy Cajun single row in C with top Italian reeds and that has enormous presence even without the extra "cut" that the higher tone of G or D would have.
Any thoughts or experience readers may have would be greatly appreciated, in case I take precipitous action which might spoil what is currently a nice box, albeit not quite loud enough for today's outdoor environment. Please help! :-\
Logged

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Reed swap or re-tune for volume?
« Reply #1 on: February 27, 2011, 09:18:59 PM »

I don't think italian reeds would make it louder.  Hohner reeds are known for having good volume (all other thing being equal).  Your one row is louder because, well because it is a one row....more reeds sounding at once and smaller bellows which allows you to really punch them with high pressure.  Tuning it wetter will make it sound louder perhaps.  Wetter tuning cuts through other sounds better.  I would expect an MMM hohner to be pretty darn loud.  Is your bellows compression OK?
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Reed swap or re-tune for volume?
« Reply #2 on: February 27, 2011, 09:49:07 PM »

I think Waltzman probably has it about right.  I've noticed that my similar aged two-voiced Hohner Clubs have a softer sound than, for example, a Pokerwork.  On reflection, I believe that the principle difference is that the bigger Clubs have a larger cross section bellows, so the maximum air pressure from my weedy little arms is less.  It is certainly a less noticeable difference with the Club model I which is only very slightly larger than the Pokerwork.

Comparing four-stops, my Hohner 114C has very wet tuning and sounds like a fairground organ, but it carries well.  My Castagnari Max seems louder, but the almost dry tuning gives it an edge which verges on painful.  The two played together will probably both be heard for the same distance.

Rob.
Logged

rileycat

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 429
Re: Reed swap or re-tune for volume?
« Reply #3 on: February 27, 2011, 10:54:34 PM »

Thanks, Both. Compression is good, so perhaps tuning should be wetter to get the sound to carry?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed swap or re-tune for volume?
« Reply #4 on: February 27, 2011, 11:08:56 PM »

Possibly,  but I'd it is a 1930s box it will have the older type of Hohner treeds stamped H on the reedplates.  Later Hohner T reeds are usually louder. 

But,  so much of the character of a box is determined by many details of design and construction that for anything you do the effect will be modulated by all the other parts of the box.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Sandy Flett

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
    • Accordion and Melodeon Blog
Re: Reed swap or re-tune for volume?
« Reply #5 on: February 27, 2011, 11:13:33 PM »

Would it be worth removing the grill to see how much of the sound that may be absorbing?

And how about checking whether the treble reedblocks are well enough alinged with the holes in the soundboard?
Logged
DG Dino Baffetti Carnival II (plus accordions)
Accordion and Melodeon blog

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Reed swap or re-tune for volume?
« Reply #6 on: March 05, 2018, 12:31:21 PM »

Possibly,  but I'd it is a 1930s box it will have the older type of Hohner treeds stamped H on the reedplates.  Later Hohner T reeds are usually louder. 

But,  so much of the character of a box is determined by many details of design and construction that for anything you do the effect will be modulated by all the other parts of the box.

I have just bought a box with all  H reeds, apart from the bass end which has both, where the lower notes are T reeds

SJ
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Reed swap or re-tune for volume?
« Reply #7 on: March 05, 2018, 04:53:19 PM »

If the reeds are waxed in, it is worth checking the condition of the wax. I have noticed that cleaned/revalved reeds with new wax tend to be a bit louder and brighter sounding than before they were overhauled. But a complete re-wax/overhaul takes a fair few hours  (depending on the number of reeds of course).

Microbot

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 345
Re: Reed swap or re-tune for volume?
« Reply #8 on: March 05, 2018, 07:07:50 PM »

Hi Rileycat,

they're often great boxes with great reeds. Taking things in order ...

The 'match-up' between reedblock and soundboard holes may not be 100% accurate.... always one of the first things to check if you've got poor response.... removing a couple of reeds is the easiest way to observe this, and adjust the position/fit of the treble blocks if needed. Roger's comment on wax is also worth checking... also, are the reedblocks flat to the soundboard?`

But there's also some interesting variation in the design of these boxes, which may be relevant.

On most of these 3-voice 'pokerwork-size' Hohners, the reedblocks and soundboards have 10mm holes ... considerably less than the 11mm or 11.25mm in standard pokerwork/Ericas. Sometimes, the reedblocks have these 10mm holes, whilst the soundboard has larger 11mm holes, occasionally with no dividing wood between the holes, giving a larger 'figure-of-eight' hole in the soundboard.   

Also, it needs to be remembered that the pallet-lift to the inner row is poor, especially if the button travel has been limited.

All of this gives lots of scope for variation between boxes and also for mods/improvements ...

I've set up boxes where the reedblock & soundboard holes have been enlarged - slightly more so on the inner reedblock/soundboard holes -  to give a good 'voice' to the box. I believe some of the Irish fettlers do likewise in setting up C#/D and B/C boxes. And often they will go for swing or even dry tuning ... with plenty of volume. I think Charlie Piggot plays one.

But caution is needed ... the area of the soundboard/reedblock hole increases dramatically with only a slight increase in the radius/diameter of the hole. You need to avoid harsh overtones from making the apertures too large.

cheers

Mike R
Logged

anotherboxplayer

  • Good talker
  • **
  • Offline Offline
  • Posts: 78
Re: Reed swap or re-tune for volume?
« Reply #9 on: March 06, 2018, 02:41:39 PM »

Mike Rowbotham will sort it out!  and forget Italian reeds - go for the Czech Harmonikas.  Mike has just re-reeded my main Oakwood with their A Mano professional reeds.  They have an almost Binci bite and are way cheaper than Italian reeds; they are also responsive to deal with as a business and can quickly make reeds with specific plate sizes.  Rees Wesson did an experiment with some of my Harmonikas a while back (forget which range of reeds) and said they were indistinguishable from Salpa / Voci Armoniche (except half the price).
Logged

Sebastian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1056
Re: Reed swap or re-tune for volume?
« Reply #10 on: March 06, 2018, 03:00:41 PM »

You are answering to a thread from 2011.  ???
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Reed swap or re-tune for volume?
« Reply #11 on: March 06, 2018, 03:06:37 PM »

You are answering to a thread from 2011.  ???

 ::)

Worth it for the info about Chech reeds, though, I suppose.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Reed swap or re-tune for volume?
« Reply #12 on: March 06, 2018, 03:22:35 PM »

... and I wonder what happened to the 1930's black Hohner in the end ...
Logged

Microbot

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 345
Re: Reed swap or re-tune for volume?
« Reply #13 on: March 06, 2018, 03:37:45 PM »

.......... aah Now I understand ....

I think Rileycat's Black Hohner 3-voice went to 'Folk Blues and Beyond'!

Mike R
Logged

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Reed swap or re-tune for volume?
« Reply #14 on: March 06, 2018, 08:10:25 PM »

I've set up boxes where the reedblock & soundboard holes have been enlarged - slightly more so on the inner reedblock/soundboard holes -  to give a good 'voice' to the box.

I would be interested to know what method you use to enlarge the holes in the blocks.
Also, I would appreciate your opinion on whether there is any advantage in increasing the soundboard holes only.
Logged

Sebastian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1056
Re: Reed swap or re-tune for volume?
« Reply #15 on: March 06, 2018, 08:46:56 PM »

Worth it for the info about Chech reeds, though, I suppose.
Yes. I will try out their version of DIX-reeds in the next days or so. Quite excited.  (:)
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Reed swap or re-tune for volume?
« Reply #16 on: March 09, 2018, 10:38:19 AM »

Just an idle thought - just got up and still bleary eyed.  I presume that manufacturers rely on tolerancing to align the holes between fondo and blocks.  If one were looking to improve airflow (and alignment) but presumably limited by the size of aperture that the block can accomodate there may be some benefit to be had from using a tapered reamer (from within the case).  Of course accomplishing this would be fraught with danger, lowering an assembled end onto a spinning cutting tool!  Perhaps a foot pedal from a sewing machine could be used to run the tool once the box was hovering in position?  The "inspiration" or at least germ of the idea is a parallel with flowing inlet and exhaust tracts in a cylinder head and manifold assembly where ideally the inlet tapers from the largest diameter down to the maximum size available at the valve.

I'm not suggesting anyone should try this unless they have a very expendable box to experiment on and I doubt the benefits would be great unless the original alignment were very poor.  More of a theme for discussion.

Rob.
Logged

rileycat

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 429
Re: Reed swap or re-tune for volume?
« Reply #17 on: March 09, 2018, 11:29:30 AM »

Thanks all for your inputs - as has been noted, this is an old post (2011) which seems to have been revived.  Since posting the request, I have regrettably sold said instrument, so can't benefit from the help offered....damn!  Still hopefully, someone else can read these posts and gain from the valuable insights offered.  Just to add a codicil, I love the 3 voice (MMM) sound of these old smallish Hohners so more recently spoke to Mike R. about the volume 'thing' and with his advice about hole size given above, bought a Bb/Eb of the same type from him thus modified and I'm pleased to say that it has much better volume with no real air-consumption negatives.  Other 'fixes' may also work, of course, but for this rather rare Hohner model, I feel this mod. does the job - I was easily able to lead well over a 100 lusty singers in a largish church at Christmas, playing solo - job done, now how can I get that D/G back;)?
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Reed swap or re-tune for volume?
« Reply #18 on: March 09, 2018, 11:58:33 AM »

I'm pleased to say that it has much better volume with no real air-consumption negatives.

In contrast with Rob2Hook's engine tuning analogy, where increasing the airflow is definitely the object of the exercise, making the holes bigger in a melodeon doesn't significantly increase the airflow, because the reed is already by far the biggest restriction. What widening or smoothing the air hole does to make it louder is provide a less sound-absorbent path for the sound to make its way from the reed to the outside air.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed swap or re-tune for volume?
« Reply #19 on: March 09, 2018, 12:24:38 PM »

Anahata, you took the words  right out of my mouth.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal