Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: air before sound  (Read 2264 times)

0 Members and 1 Guest are viewing this topic.

sqwzboxstudent

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 977
  • dartmoor / gypsy style
air before sound
« on: February 28, 2011, 05:18:05 PM »

on the G row of my box, when i play high notes at the dusty end of the keyboard, i can hear air rushing through the sound hole before i hear the note, and it sounds weak, the whole box is realy airtight anyother time, and the A and D row are ok, i took the reed blocks out, checked for blockages and screwed the back in tight, but its still happening,
anyone got a solution?
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: air before sound
« Reply #1 on: February 28, 2011, 05:34:14 PM »

Usually that's one of the more obvious differences between good and not-so-good reeds.
It can also be the set of the reed - how far away the tip is from the slot when at rest.
Also valves missing or not closing properly.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

sqwzboxstudent

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 977
  • dartmoor / gypsy style
Re: air before sound
« Reply #2 on: February 28, 2011, 06:08:12 PM »

all the other reeds are fine its just 1 or 2 that let air gush through more,if its the valve how easy is it to check / put right?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: air before sound
« Reply #3 on: February 28, 2011, 07:10:18 PM »

It is more likely to be the reed set or reed quality than a valve, valve troubles tend to produce odd noises.  Its easy to rule out valve problems,  you need to open the box and take the reedblock out.   The valves should be lying flat or almost flat, and the valve on the underside should be flat too which you can see if you look up into the vent in the base of the reedblock.   The top two or three reedplates normally have no valves.

You can also do a quick visual inspection for reeds set too high.  Identify which notes are the problem,  then have a look at the tips of the relevant reeds, if they look noticeably higher above the reedplates than the reeds on either side then you may have the source of the problem.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

sqwzboxstudent

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 977
  • dartmoor / gypsy style
Re: air before sound
« Reply #4 on: February 28, 2011, 08:45:50 PM »

is the valve the bit that goes up the reed block? what do i do if the reed is set too high?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: air before sound
« Reply #5 on: February 28, 2011, 09:07:12 PM »

The valve is the flap of leather or plastic that lies parallel to the reed tongue

Setting the reed gap involves bending the reed very slightly.  You need a trial and error approach till you get rye optimum position.  It's not really something you want to learn on your best box.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

sqwzboxstudent

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 977
  • dartmoor / gypsy style
Re: air before sound
« Reply #6 on: February 28, 2011, 10:46:31 PM »

best not to hey! thanks theo
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal