Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Bass Mechinism design  (Read 5896 times)

0 Members and 1 Guest are viewing this topic.

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Bass Mechinism design
« on: March 01, 2011, 01:21:46 AM »

I've been looking at the photos of the Paolo Soprani that Theo has for sale. I've been fascinated by the design of the bass mechanism. The only bass mechanism I've seen so far is the Hohner arrangement of octaves for the fundamental and major or minor triads for chords. It looks like the Soprani is arranged to play two notes on a push or pull, or three notes on push or pull. Is that right?

Can anyone explain how the bass is arranged and what the actual notes are for each button, please?

It looks like this mechanism is also going to be quieter than a Hohner, less chance of a slap or clacking sound. Is that true?

I have yet to discover a photo of the mechanism on the treble side of a Soprani. Could someone please post a photo? I'm very curious about the mechanical design and don't have access to someone with a Soprani.

Thanks,

Ed
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Bass Mechinism design
« Reply #1 on: March 01, 2011, 01:46:15 AM »

Yep, the bass reed block generally has a low reed and a reed the octave above that. With this mechanism it also opens the tonic of the chord reed, meaning that you get three reeds on the bass. This gives a fuller, richer and louder sound, at the expense of the contrast of the deeper bass. The chords remain unchanged, except that you are opening two pads rather than one.

This is quite an elegant way of doing it as well, each maker has their own mechanism. My Weltmeister has a thing at the bottom, which will open the tonic pad whichever button is pressed.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Bass Mechinism design
« Reply #2 on: March 01, 2011, 03:24:27 AM »

Yep, the bass reed block generally has a low reed and a reed the octave above that. With this mechanism it also opens the tonic of the chord reed, meaning that you get three reeds on the bass. This gives a fuller, richer and louder sound, at the expense of the contrast of the deeper bass. The chords remain unchanged, except that you are opening two pads rather than one.

Ukebert, sounds like the chords are set up with one reed of the chord on one pad (the tonic) with two reeds on the second pad (median and dominant). Is that right?

Quote
This is quite an elegant way of doing it as well, each maker has their own mechanism. My Weltmeister has a thing at the bottom, which will open the tonic pad whichever button is pressed.

Could you post a photo of the mechanical arrangement in your Weltmeister bass, please? I'm getting very curious about how different manufacturers solve the problems of opening and closing the pallets quickly, and quietly.

Thanks,

Ed
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Bass Mechinism design
« Reply #3 on: March 01, 2011, 07:47:42 AM »

Just in case you missed the Dating my Tommy thread there are pictures of a Castagnari Tommy bass arrangement with shared reeds

http://forum.melodeon.net/index.php/topic,6266.msg78690.html#msg78690

michik

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 412
Re: Bass Mechinism design
« Reply #4 on: March 01, 2011, 09:10:58 AM »

simple bass mechanism of one of my 2 row melodeon (built: 1920s, Vienna)


one pallet per bass (and octave)
one pallet per chord

Logged
Michael Knapp ~ Vienna ~ Austria
Playing on "Parigi Giovani" G/C (made by Bompezzo) - My recordings: http://www.onmvoice.com/mknapp

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Bass Mechinism design
« Reply #5 on: March 01, 2011, 10:07:25 AM »

My Castagnari Lilly has 'side arms' soldered on to the 4 bass push rods. These 'steal' a note from the associated chord.  It thus produces a 2+3 sound from only 4 reeds 8)
Logged
  _       _    _      _ 

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Bass Mechinism design
« Reply #6 on: March 01, 2011, 04:40:49 PM »

Just in case you missed the Dating my Tommy thread there are pictures of a Castagnari Tommy bass arrangement with shared reeds

http://forum.melodeon.net/index.php/topic,6266.msg78690.html#msg78690

I did miss that one. Thank you very much, and a clear explanation. The photos of the mechanism really help a great deal!

I did find an older discussion of a Paolo Soprani that was originally posted with photos. However the photos are no longer there for some reason. Have the photos been saved somewhere else or are they deleted after a certain amount of time?
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bass Mechinism design
« Reply #7 on: March 01, 2011, 04:45:13 PM »

I did find an older discussion of a Paolo Soprani that was originally posted with photos. However the photos are no longer there for some reason. Have the photos been saved somewhere else or are they deleted after a certain amount of time?

Those photos were displayed via links to an external site.  The photos appear to have been removed from the external site.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Bass Mechinism design
« Reply #8 on: March 01, 2011, 10:40:31 PM »

My Castagnari Lilly has 'side arms' soldered on to the 4 bass push rods. These 'steal' a note from the associated chord.  It thus produces a 2+3 sound from only 4 reeds 8)

Would you mind posting a photo of both the mechanical side and the reed side? I can't quite figure out what you're talking about. Not sure how you get four reeds to become five. What am I missing?

Thanks,

Ed
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Bass Mechinism design
« Reply #9 on: March 01, 2011, 10:41:24 PM »


Those photos were displayed via links to an external site.  The photos appear to have been removed from the external site.

Thanks Theo.

Anyone know where those photos went?
Ed
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Malcolm Austen

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 495
  • any old hohner
Re: Bass Mechinism design
« Reply #10 on: March 02, 2011, 09:07:56 AM »

There was a link from this thread to Theo's Saltarelle resurrection, have you taken the photos down Theo?
They were a very interesting and detailed look at the workings of a melodeon.
Logged
aka malodeon

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bass Mechinism design
« Reply #11 on: March 02, 2011, 10:32:11 AM »

Photos are still there, apparently the public link I posted has expired.

Here they are again:

Saltarelle Tramontane resurrection part 1, part 2
« Last Edit: March 02, 2011, 03:09:01 PM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Bass Mechinism design
« Reply #12 on: March 02, 2011, 12:57:30 PM »

Photos are still there, apparently the public link I posted has expired.

Here they are again:

Saltarelle Tramontane resurrection part 1, part 2
Theo - part 2 is still unavailable to non-Facebookers. Can you tweak the permissions please?
Thanks!
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bass Mechinism design
« Reply #13 on: March 02, 2011, 03:09:18 PM »

Try that now.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Bass Mechinism design
« Reply #14 on: March 02, 2011, 04:14:27 PM »

Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Bass Mechinism design
« Reply #15 on: March 02, 2011, 05:38:09 PM »

Thank you Theo!

A wealth of information in the photos and descriptions. Much to think about in terms of the design of the instrument as well as a thorough documentation of the repair and restoration of a well worn instrument.

Thanks!

Ed
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Malcolm Austen

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 495
  • any old hohner
Re: Bass Mechinism design
« Reply #16 on: March 02, 2011, 09:16:50 PM »

Thanks Theo, I have looked through the photos several times and always found them interestion.
Is the new owner a melneter ? it would be good to hear how it / they are getting on.
Logged
aka malodeon

Howard Mitchell

  • Guest
Re: Bass Mechinism design
« Reply #17 on: March 03, 2011, 12:41:08 PM »

My Dallape has not seen the light of day for a while but I was prompted by this thread to take a video of the bass mechanism.
As you can see it has the mechanism to open the bass note and the root of the chord together and to select the notes for the chord from a row of reeds rather than have a set of reeds for each chord.

This instrument was made in Stradella, the place bearing the same name as the Stradella Bass now seen on most piano accordions.

The Dallape web site claims "The following is an extract from the Italian Music Encyclopaedia, under the entry "ACCORDION": "...the key figure who managed, through a series of brilliant innovations, to change the archaic accordion into the more complete and complex diatonic accordion, was born in Trentino and resided in Stradella. His name was MARIANO DALLAPE'". "


http://www.youtube.com/watch?v=_aFs5YDMvfg



Howard Mitchell
Logged

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: Bass Mechinism design
« Reply #18 on: March 03, 2011, 04:18:59 PM »

Okay, here goes:

For the paolo soprani boxes, the bass is 4 voice, and the chord is 4 voice. In total you have 6 reeds for each bass/chord pair, but the two of them are shared - they both play the same pitch.

A couple of pictures of a 1940's box (not mine): As you will see, the low and middle bass notes are one one block, and the two shared reeds along with 3rd and 5th are on another block. This system was introduced in the early 1940's - prior to that, the shared reeds were flat-mounted with all other reeds (low and middle bass, 3rd and 5th) on one block.

Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Bass Mechinism design
« Reply #19 on: March 04, 2011, 02:55:56 AM »

Could you post a photo of the mechanical arrangement in your Weltmeister bass, please? I'm getting very curious about how different manufacturers solve the problems of opening and closing the pallets quickly, and quietly.

Thanks,

Ed

Your wish etc :P Be warned, it's pretty approximate and doesn't work at all well. I've got as far as taking it off and then scratching my head and trying to work out how to improve it without starting again.

And thanks for this thread, I'm very interested as well to see how makers are doing it.

This is the most horrible looking mechanism that I've ever seen, but I'm sure that it works very well. I wouldn't want to design one of those things. Actually I rather would, thinking about it :P
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal