Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: F. Lange Chemnitz Bandoneon bellows  (Read 3117 times)

0 Members and 1 Guest are viewing this topic.

melodona

  • Member
  • *
  • Offline Offline
  • Posts: 31
    • Melodona Accordions
F. Lange Chemnitz Bandoneon bellows
« on: March 08, 2011, 11:39:30 PM »

hello there
a client sent me this to salvage
doesn't need to be perfectly restored, just functional
the bellows are patched all over
if I can't find a replacement I'll do my best
but it would be nice...

they're hard to find in Canada
any tips on where I might look for parts?
on who I should contact?
could be new or used, from near or far
my client would pay for shipment
12 folds, 6"3/4, only one separation in the middle

and if I end up fixing it up
I'll be looking for corners and sides (48 of each)
again, if you know where I can shop for those

thank you!

Melodona
Logged

Matthew B

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 894
Re: F. Lange Chemnitz Bandoneon bellows
« Reply #1 on: March 09, 2011, 01:45:25 AM »

I'd suggest you check in with these guys http://concertinamusic.com/.  They're a pretty friendly bunch, and seem to have a few hobbyist and professional repairers in their membership.  My guess is that if it works on a Chemnitzer, it will probably work on a Bandoneon.  Also, if you don't mind a bit of geographical separation Harry Geuns in Belgium makes and restores bandoneons, and other big concertinas.  He can be found at http://www.bandoneon-maker.com/harrygeuns.htm.  Again, a nice guy, and generous with time and advice.
Logged
Charter Member Presumpscot and Fore River Accordion Club

zippydw

  • Member
  • *
  • Offline Offline
  • Posts: 40
Re: F. Lange Chemnitz Bandoneon bellows
« Reply #2 on: March 10, 2011, 06:57:17 PM »

Looks like the one I picked up.

A couple of repairers I showed it to just smiled. Don't know if that was because they were amused that I would buy such a thing, or the repair cost would be a nice downpayment on a retirement cottage or boat!
Logged

melodona

  • Member
  • *
  • Offline Offline
  • Posts: 31
    • Melodona Accordions
Re: F. Lange Chemnitz Bandoneon bellows
« Reply #3 on: March 10, 2011, 08:50:02 PM »

hardly seems worth it I know...
and what will be left behind after I take out those corner patches?

best look for a replacement hmmm...
in case anyone has or knows someone who migth have,
the measurements were wrong in my first post
it's (I'm told mm are better too) sides: 193mm & folds: 34mm

thank you Matthew, I'll try and contact Harry

Melodona
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: F. Lange Chemnitz Bandoneon bellows
« Reply #4 on: March 10, 2011, 09:11:59 PM »

Maybe get a new bellows from one of the Italian bellows makers,  they are very good at getting close to the colours and designs of old bellows.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

oggiesnr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 995
  • Dino BPII, Alfred Arnold Bandoneon, Loffet G/C
Re: F. Lange Chemnitz Bandoneon bellows
« Reply #5 on: March 10, 2011, 09:40:28 PM »

Again Harry Guens will make you a new set of bellows but I'm not sure the instrument is worth it.  If it were an Alfred Arnold (especially a 144AA) then maybe but the Lange's were second division when new and even now rarely fetch over £500, one went recently for £325.

Steve
« Last Edit: March 10, 2011, 09:43:54 PM by oggiesnr »
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal