Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: clip on mics  (Read 10498 times)

0 Members and 1 Guest are viewing this topic.

Sandy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1007
  • 'Musical Landlady'
clip on mics
« on: June 26, 2008, 01:27:21 PM »

just wondering about buying two beyer opus 62 mics for my salt. nuage. It seems from previous posting on forum that a couple of people are happy with these. Are you still happy with these? Would love to hear any suggestions for clip on mics.
cheers.

BruceHenderson

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 262
Re: clip on mics
« Reply #1 on: June 26, 2008, 07:21:44 PM »

Would love to hear any suggestions for clip on mics.
cheers. 

   Me too.  BH NC USA
Logged
I love one-rows!  Four reeds kick butt!!!!

Howard Jones

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1203
Re: clip on mics
« Reply #2 on: June 26, 2008, 09:19:54 PM »

I don't know about the Beyers.  I use an AKG C516 ML on the treble end and a Tandy PZM fitted inside the bass end.  They work fine.

It's certainly worthwhile getting some kind of mounted pickup. I hate being tied to a mic stand.

BruceHenderson

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 262
Re: clip on mics
« Reply #3 on: June 26, 2008, 10:03:48 PM »

  (snip)  I hate being tied to a mic stand.

   Yep, do you want the mic attached to you or do you want to be attached to the mike?
Logged
I love one-rows!  Four reeds kick butt!!!!

Sandy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1007
  • 'Musical Landlady'
Re: clip on mics
« Reply #4 on: June 26, 2008, 11:50:43 PM »

re: I use an AKG C516 ML on the treble end and a Tandy PZM fitted inside the bass end.
Are you using different ones because they are best for the particular low or high frequencies?
and excuse my ignorance but how does that compare cost-wise to the beyer opus 62?
cheers
 :-[

Howard Jones

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1203
Re: clip on mics
« Reply #5 on: July 05, 2008, 12:09:26 PM »

I use a Tandy PZM in the bass because:

1) Andy Cutting recommended it
2) I already had one
3) Being internal it's neat and unobtrusive.  The jack fits into one of the holes in the end so I didn't have to drill the instrument to fit it.

I don't think there would be room inside the treble end for one of these.  It would probably be simple to fit mic capsules internally in the treble end, but I don't know enough (make that anything) about electronics to do it myself.

I had been using a home-made microvox-style pickup on the treble but I've never been happy with the velcro attachment so I decided to try a gooseneck mic.  The AKG C416 had good reviews and was a reasonable price, so I got that and it has worked well  - my sound engineer seems happy with it, anyway. 

However the mounting clips on this model were a bit fragile. The current version is the C516, which is essentially the same mic but with a better mount.  AKG recommend them for a number of instruments, including accordions, and they can be used on the bass end as well.  You need either a phantom power adaptor or a battery psu, which will take 2 inputs.

I'm no techie when it comes to mics and PA, I just turn up and plug in, so I can't say more than that!

Howard Jones

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1203
Re: clip on mics
« Reply #6 on: July 05, 2008, 12:26:31 PM »

Actually there is more:

The Beyer appears to be attached by a spring clip.  I looked at the AKG clip-on version, but couldn't find anywhere on my Nuage to attach it - the stops get in the way.  John Spiers uses a clip-on AKG but he's fitted some sort of bracket to his instruments to take it.

The C516 ML seems to have a longer gooseneck and clips into a plastic mount held on with a sticky pad - it's quite firm but can be removed without damage.  My only complaint is that AKG only supply one mount, and it's next to impossible to get more out of them, so if you need to switch mics between several instruments this may be a problem.

Price-wise, the AKG is possibly a little more expensive but there are bargains to be found on-line.

http://www.akg.com/site/products/powerslave,id,981,pid,981,nodeid,2,_language,EN.html

Mike Gott

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 285
  • Melodeon and hairy arm
Re: clip on mics
« Reply #7 on: July 07, 2008, 07:39:11 PM »

The only note of caution that I'd add after successfully using clip mics is from when the mic on my low-held 1-row accidentally picked up a er, loud moment of flatulence from the banjo player then stood in front of me and broadcast it to an appreciative ceilidh audience...

Mike
Logged
"Traditional music was for entertainment, it wasn't for a further education class" (Bob Davenport)

Rivington Morris, Bolton, Lancashire.

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: clip on mics
« Reply #8 on: July 07, 2008, 09:23:33 PM »

I remember Roaring Jelly having a special mic set low on the stage which they announced as only being able to pick up farts!  :D
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Martin J

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 902
  • Poole, Dorset
Re: clip on mics
« Reply #9 on: July 07, 2008, 11:48:30 PM »

Years ago I chopped up a Microvox and mounted the mics on double sided adhesive tape, three in the treble end and one in the bass.  I mounted the electronics bit inside the grill and connected them together with a wire through the bellows.  It's all working splendidly and has done for 12 years with very few battery changes.  The wire through the middle of my Dony does sometimes supprise tuning persons, the most recent being yourself Rees (Thanks for the emergency tuning)  Being a gentleman you refrained from mentioning it.

Care is needed as the wire did foul the reeds early on and the treble mics have to be positioned so that the button arms don't hit them.  Oh yes, you must seal the wire with bees wax where is passes through the wind chest if you don't want a loud wheeze to come through the PA.

Martin
Logged
Castagnari, Weltmeister, Giustozzi, Streb, too many Hohners.  No Strings Attached ceilidh band

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: clip on mics
« Reply #10 on: July 08, 2008, 12:36:03 AM »

Hi Martin. I did notice a wire between the two ends of your Dony but thought it was a safety device to stop you pulling the bellows apart. :P

Seriously, the way that the Italians do it is to tape the wire to each bellows fold at the bottom of the bellows leaving a couple of inches (50mm) for the stretch of each fold. Then the wire isn't hanging loose inside the box.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: clip on mics
« Reply #11 on: July 08, 2008, 09:22:31 AM »

I use a pair of AKG C416 goose-neck mics on my Lilium, which is my main gigging box. I bought them from Rees about 5 years ago and they've done good service so far. I'm very pleased with the sound quality, although the RH mic needs careful angling to minimise picking up rattling pallet noise; similarly the LH mic needs to be positioned to not pick up the hiss from the air button. The foam wind protectors work well in this respect.

The mics are not the clothes-peg clip on type, but they have a small plastic forked end which clips into a small dovetail slot on a purpose-designed plastic shoe-plate which I attach to my melodeon with small velcro pads on the top of the wooden ends.

The thin mic cables are a bit of a faff though. They always seem flimsy and though I've not had any trouble so far, I am always scared they will not stand up to the rigours of gigging. I lead each cable down the front of the melodeon, next to the bellows edge, using the heads of the bellows pins as a sort of fairlead. At the bottom bellows pin I secure the cable to the melodeon body with a small piece of PVC clear insulating tape which stops the cable flopping around and can also be removed easily without leaving a sticky residue on the wood. The cables then lead down to the little control box/power unit which sits on the floor or on my melodeon case in front of me. The power unit has a belt clip, but I can't for the life of me see how I can use it in such a position without the mic cables fouling the bellows or getting caught up in my melodeon straps, or my arms or clothes.

As it takes me a few minutes to set this all this up, I tend to stick with one melodeon during a gig, when what I'd really like to do would be to swap instruments for some of the time. Perhaps I'm doing something wrong. How do others manage?

Cheers,
Steve


Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: clip on mics
« Reply #12 on: July 08, 2008, 11:18:21 AM »

I also use AKG 416Ls on my Trilly.  Generally pleased, but when playing solo you notice that the treble end of the keyboard is favoured (due to the mounting position).  Second problem is that when switching to the Max - usually with about ten seconds notice from the caller (!) - the panic is minimised by the fact that I can't find enough room for a bass mount.  I'm still trying to get a Crown or Realistic PZM for that...  Changing to other boxes requires spare mounts, I got some from Loffet - nobody in the uK had any!
I have used Microvox - good, sturdy, but a bit lacking on frequency response.
Next project is to build my own PZM / boundary layer mic.  I've bought the wide spectrum Panasonic electret capsules.

My first good box was a Dino Baffetti three voice, later sold as the Saltarelle Berry.  It had three mics stuck inside the grille cloth with RTV and one in the bass end.  The wire between is as Rees described, attached to each fold of the bellows (with a dab of RTV) so that it formed a Serpentine along the length.  The battery box was built into the treble end with the volume potentiometer in the top of the grille frame and a stereo jack socket in the bottom.  Plugging a mono lead into it (guitar lead) also served to switch the mics on as it bridged the two contacts.  For its simplicity of use alone, I miss that box!
Logged

Howard Jones

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1203
Re: clip on mics
« Reply #13 on: July 08, 2008, 01:57:26 PM »

The AKG C 416 L has now been replaced by the C516 ML, which besides having a more robust clip has a separate lead which attaches to the mic using a mini-xlr.  If the lead were to get damaged, it would be easier to replace (assuming you could get spares from AKG, which is another matter).

I usually play with one shoulder strap, but for gigging, when I'm usually standing up, I use two.  I've taped the mic lead to a spare strap with miles of gaffer.  It's then just a question of putting on the extra strap and plugging one end of the lead into the mic.  The other end connects to the battery supply, which clips onto the strap.  The lead is kept neatly out of the way as it runs down the shoulder strap.

This wouldn't work very well if I played more than one box, if I did I would try to get hold of another lead and have the same setup, then I'd just have to swap the mic and plug in.

Sandy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1007
  • 'Musical Landlady'
Re: clip on mics
« Reply #14 on: July 13, 2008, 11:36:01 PM »

thanks for all the input. Time to put all the info together and put pick ups on the christmas list.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: clip on mics
« Reply #15 on: August 17, 2008, 11:20:46 AM »

I use a pair of AKG C416 goose-neck mics on my Lilium, which is my main gigging box. ......

The thin mic cables are a bit of a faff though. They always seem flimsy and though I've not had any trouble so far, I am always scared they will not stand up to the rigours of gigging.....
My worst fears have been realised  :(. A few weeks after writing the above, both mic cables have now failed within a few days of each other  >:(. The main trouble seems to be insulation failure or broken copper wire at the point close to where the mic cable enters the flexible swan-neck. This is the section of cable which has tight bends where it goes around the anchor fins on the mic-clip. I just knew that would cause trouble sooner or later. This, despite my being as careful and protective of the cables as possible.

On one mic, I've attempted a repair by cutting away the uppermost 3 inches of cable where the bad section is, and resoldering the wires to the stub-end of the cable coming out of the swan-neck. But - the latter wires are unbelievably thin, and either due to my lack of soldering expertise, or work-hardening of the wire, one of the copper cores has snapped clean off right where it enters the swan-neck, leaving me with nothing to attach the main cable to. I'm not sure what to do now. I don't know whether it is possible to dismantle the entire mic/swan-neck set-up and replace the entire cable. It doesn't look particularly feasible.

I've not dared to look at the other mic yet. I've got to do something quick as I've got a couple of gigs coming up in 6 days time. I might just have to splash out on a couple of new AKG C516s.
I do like the sound quality of the AKG mics, but the ergonomics and robustness of the cabling and attachment system is rubbish. Grrr!  >:(

I'm seriously wondering about abandoning the AKG altogether and going for a Microvox system, which seems more robust, even though the sound quality is said by some to be not as good. Any comments, anyone, please?
« Last Edit: August 17, 2008, 11:25:21 AM by Steve_freereeder »
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: clip on mics
« Reply #16 on: August 17, 2008, 01:47:03 PM »

I'm seriously wondering about abandoning the AKG altogether and going for a Microvox system, which seems more robust, even though the sound quality is said by some to be not as good. Any comments, anyone, please?
I have never joined this conversation as I felt a second-class citizen as a Microvox user  ;D

I have modified my Microvoxs as follows


I have shortened the treble side cable and fitted a better quality plug, plus I install it upside down ie cable out the top


I then mounted the power supply to the rear of the treble end. I also replaced the cack quality plug on the bass mic.

Obviously this only suits normal melodeon players (ie single strap, box on left leg) not the oddly peculiar two strap players  :). It means the whole kit is attached to the melodeon which can be put down when not playing easier than if the PSU is on your belt etc. Shortening the treble end cable also cuts down the chance of snagging it on stuff.

My other mod has been to add an on/off switch to the PSU so I can nurdle whilst our caller is teaching a dance, or appear to be playing for the songs on tunes I don't 100% know.

Bigger versions of the pictures HERE and HERE
« Last Edit: August 17, 2008, 01:49:16 PM by Lester »
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: clip on mics
« Reply #17 on: August 17, 2008, 07:26:27 PM »

Lester,

Very interesting! Many thanks for your reply and especially the photos. Mounting the PSU on the melodeon seems to be a super wheeze - it minimises the length of flimsy cable required. I'll have to think about this some more. 

As a Microvox user you are in good company, as according to their website, some prestigious players use the system - see here:
http://www.microvox.demon.co.uk/users.htm

How would you rate the sound quality of your set-up?

In the meantime, a friend who is a whizz with electronics and sound systems for fiddles has rebuilt my AKGs for me, so I'm about to and test them out.....

Cheers,
Steve
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: clip on mics
« Reply #18 on: August 18, 2008, 09:49:50 AM »

How would you rate the sound quality of your set-up?
I find them perfectly OK but have not tried anything else so not sure that is a good recommendation.

Howard Mitchell

  • Guest
Re: clip on mics
« Reply #19 on: August 18, 2008, 12:25:31 PM »

Steve,

AKG have a service document for the 416 at -
http://www.akg.com/mediendatenbank2/psfile/datei/89/C4164055d1f5e999f.pdf
It shows how the cable is attached. I have in the past replaced a cable on a 416.  It's delicate work but quite feasible.

I use 416s and 418s on a variety of instruments including fiddle (the 418 clips nicely on the chin rest), double bass (a modified 416 attached to the tail piece) and melodeon. I've put an extra D-ring on the right hand melodeon strap, at the back, which hold a B29L battery pack or an AKG radio transmitter.  This means that the small wires are shorter.

I'm in Derby of you need help with the electronics but it sounds as if you have someone local to you.

Howard Mitchell
www.hgmitchell.co.uk

Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal