Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Wanted: electronics expert  (Read 2831 times)

0 Members and 1 Guest are viewing this topic.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Wanted: electronics expert
« on: March 11, 2011, 10:58:44 PM »

I need some help with an electronics project.  I have a Tandy PZM that I want to fit to the left end of my box.  It comes with a battery power supply and a mini jack connector.  I would really prefer to be able to run it from phantom power, but I understand that this will require either modification or replacement of the electronics in the power supply.  While I'm at it I'll replace the jack with an xlr connector. 

Problem is my knowledge of electronics is pretty much non-existant.  Can anyone suggest how to proceed,  or even offer to do the job for me?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Bill Young

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1151
  • Paolo Soprani BCC#
Re: Wanted: electronics expert
« Reply #1 on: March 12, 2011, 12:10:04 AM »

You may have already seen it, but, if not, there's a bit about phantom powering Tandy PZM in this Sound on Sound microphone article (half way down, yellow box).
Logged

Howard Mitchell

  • Guest
Re: Wanted: electronics expert
« Reply #2 on: March 12, 2011, 09:35:25 AM »

Theo,

There are various ways of making an electret mic phantom powered from the cheap and nasty to the opposite end of the scale.  Adding a couple of resistors and a capacitor can work but values are dependent on the particular electret and this doesn't provide a balanced ouput. I wouldn't recommend this route.
 
I have in the past modified a simple active DI box to provide the power for the mic. The DI box deals with provision of relatively low voltage for its own electronics and provides the balaced output signal. Just requires a couple of components to add the supply to the input.
Orchid electronics do a mini DI that I've used for this http://www.orchid-electronics.co.uk/micro.htm
Alternatively they also do a box made for this http://www.orchid-electronics.co.uk/contact_mic.htm
I've also used a phantom power adapter in an extended XLR plug which you can get from AKG (expensive) or similar.  Maplin used to do a £20 electret mic with such a device attached but I can't see them on their web site now. I may have a spare one! I'll get back to you on that.

Howard
Logged

squeezenplease

  • Member
  • *
  • Offline Offline
  • Posts: 37
Re: Wanted: electronics expert
« Reply #3 on: March 12, 2011, 09:42:04 AM »

Hi Theo....we use an electronics engineer up in Inverness by the name of Roger Tingle (some name for a sparky)...very good and helpful chappie...anyhows...will contact you direct with his number...TomC
Logged

Howard Mitchell

  • Guest
Re: Wanted: electronics expert
« Reply #4 on: March 12, 2011, 11:17:17 AM »

Maplin used to do a £20 electret mic with such a device attached but I can't see them on their web site now. I may have a spare one! I'll get back to you on that.

Howard


I have a spare used phantom power adapter from a maplin microphone. It has a small mic transformer inside with a few components to derive the electret supply from the phantom. Not as complex as the AKG variety. I've attached a quick photo by holding it in front of the web cam. 

Alternatively, have a look at http://www.epanorama.net/circuits/microphone_powering.html#phantom


Howard
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Wanted: electronics expert
« Reply #5 on: March 12, 2011, 11:26:17 AM »



I have a spare used phantom power adapter from a maplin microphone. It has a small mic transformer inside with a few components to derive the electret supply from the phantom. Not as complex as the AKG variety. I've attached a quick photo by holding it in front of the web cam. 

I think I might have one of those myself. Can I just connect the electret capsule from the pzm in place of the original?
Quote

Alternatively, have a look at http://www.epanorama.net/circuits/microphone_powering.html#phantom


Howard

I can sort of understand about half of that!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Howard Mitchell

  • Guest
Re: Wanted: electronics expert
« Reply #6 on: March 12, 2011, 11:49:32 AM »

[I think I might have one of those myself. Can I just connect the electret capsule from the pzm in place of the original?
Quote

Yes, the solder pads are pretty small but I've done this with other types of electret mics.  Make sure to get it the right way round. You might like to attach a short lead with a 3.5mm in-line jack socket to the phantom adapter and then just plug the mic in. That way you can use it with the original battery box as well.


Howard
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Wanted: electronics expert
« Reply #7 on: March 15, 2011, 07:05:28 PM »

I could do this for you.
I have made several battery boxes for Microvox kit, all of which use an XLR for output to an ordinary mic cable. The one I use regularly for band work actually combines the output from a Microvox mic for the bass end with an SM57 for the treble end.

Mine use batteries, and will tolerate phantom power but don't actually use it, but I know how to do it using the phantom power instead of batteries.

What size is the mini jack?
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal