Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: How to crimp new metal bellows corners?  (Read 8190 times)

0 Members and 1 Guest are viewing this topic.

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
How to crimp new metal bellows corners?
« on: March 22, 2011, 07:12:58 PM »

Is there a special tool for crimping metal bellows corners? I've found some references in the archives that it's easy to cause the metal corner to spread out of square when crimping or squeezing the corner onto the bellows. I hope to make a bellows for a project I've got going and don't want to make a mess of it.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

savantuk

  • A Shropshire lad
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 401
  • Location - Whitchurch, Shropshire.
Re: How to crimp new metal bellows corners?
« Reply #1 on: March 22, 2011, 08:36:09 PM »

There is a bellows crimping tool here:  http://accordionplus.com/tools.html

Also a set in the Hohner Catalogue under 'tools'.

http://www.hohnerusa.com/upload/links/l_00000775_Accordio_Parts_List_Retail_2010.pdf

Good luck!
« Last Edit: March 22, 2011, 08:42:30 PM by savantuk »
Logged
Regards,

Doug

Castagnari Tommy D/G ~  Castagnari Max in C ~ Irish Dancemaster converted toy in C with Cagnoni reeds

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: How to crimp new metal bellows corners?
« Reply #2 on: March 22, 2011, 08:56:09 PM »

Thanks for the links.

There's a big difference in cost. Is the Hohner tool that much better? Anyone have a Hohner corner crimping tool that they'd be willing to photograph and post? Please?
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: How to crimp new metal bellows corners?
« Reply #3 on: March 22, 2011, 09:04:09 PM »

I think that there was a topic which touched on this last year, can't remember what if any outcome but it might be worth a search
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: How to crimp new metal bellows corners?
« Reply #5 on: March 22, 2011, 09:58:21 PM »

Thanks Lester,

I did find that thread. I also found another thread that talked about problems with using standard pliers because they caused the ends of the corners to spread, ending up at more than 90 degrees.

maybe i need to focus the question a bit better. Has anyone here ever crimped on new metal bellows corners? If so, what kind of tool did you use?

I know others have made their own bellows, however I haven't seen anything related to putting on a whole bellows worth of metal corners. Standard Erica/Pokerwork bellows have 18 folds x 4 metal corners per fold = 72 corners to crimp on. That's a lot of corners to crimp on.

Do the companies, like Hohner, put the assembled bellows with corners in place and then put the whole thing in a press and press all of the corners at once rather than individually crimp each corner?
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: How to crimp new metal bellows corners?
« Reply #6 on: March 22, 2011, 11:34:58 PM »

Usually all the corners are pressed at once, in a specially designed press. When replacing damaged or missing corners I find my KNIPEX pliers wrench most useful. The pressure is evenly distributed and no marks are left: http://www.knipex.com/index.php?id=1216&L=1&page=group_detail&parentID=1368&groupID=1500
When doing this I prefer firmly pressing the 2 ends of the corner first, let the glue settle for an hour or so, then press the whole corner.
Logged

TomB-R

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 598
Re: How to crimp new metal bellows corners?
« Reply #7 on: March 23, 2011, 07:19:25 PM »

I think the crucial thing is to ensure that the corners you get are as near as possible the right width across the U of the channel. That'll minimise the tendency to widen the right angle as you crimp. Get it right and careful use of pliers is fine.

Talked a bit about the improvised press-work I had to do when I got this wrong on my self-build thread a good while back
http://forum.melodeon.net/index.php/topic,1958.0.html
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: How to crimp new metal bellows corners?
« Reply #8 on: March 23, 2011, 11:09:44 PM »

Be carefull to only crimp gently! Too much pressure from narrow pliers can distort the metal corners.  I found some old pliers that have broad, flat jaws.  I think they are made for glaziers to use to grip a sheet of glass and snap it along a scored line.
The ideal for repairs is to have a press that is big enough to take the whole bellows.  The press can be improvised in various ways, or you might be lucky and find a cheap nipping press.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: How to crimp new metal bellows corners?
« Reply #9 on: March 24, 2011, 12:07:02 AM »

Called grozing pliers Theo, if they are wider at the mouth than at the pivot and designed to meet at the outside edge, I had it in mind from the earlier posts a parallel approach to nipping was preferred but that was probably to mimic the all at once pressing action, I can see how they would work better for an individual corner.

30 years back when I was kitting up for a period as a lead and glass monkey to the nobility / clergy they were like rockinghorse droppings to find so unless someone has put them back into production for the hobby market don't get too excited all you budding melodeon wranglers, no doubt an internet search will bring up something similarly suitable these days, it beats hoofing around tool and junk shops ;) 

I was told to put them in a fair sized wood fire so they would heat to red and cool overnight in the ashes to make them 'kinder to the glass' (soften the metal), good advice as I couldn't figure out why the 140 year old who told me this did some of the things he did with his - 140 ? no I jest not, one wet afternoon we added up his booked overtime since WW1 and that's the only way it worked out right...................

For bellow corners I doubt softening in a fire would help much but a strip of masking tape along the contact edges might well save the odd scratch oh, and the best way to make them meet equally is to pull some fine emery strip along them sideways....

Richard - too late to type straight
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: How to crimp new metal bellows corners?
« Reply #10 on: March 24, 2011, 05:46:04 AM »

Fred Aldous of Manchester sell grozing pliers - very fast mail-order service on all their craft materials & tools.  Actually it's probably the breaking pliers that Richard is describing.

http://www.fredaldous.co.uk/

Graham
« Last Edit: March 24, 2011, 06:04:29 AM by GPS »
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: How to crimp new metal bellows corners?
« Reply #11 on: March 24, 2011, 04:21:18 PM »

Thanks for the suggestions on pliers. I looked at the Fred Aldous site and found they also have "canvas stretching" pliers. Broad flat surfaces that should be able to crimp the whole corner in one go rather than one side at a time. A quick search on ebay in the US showed canvas pliers with various surfaces, one had rubber pads instead of teeth that looked quite good for this purpose.

Ed
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: How to crimp new metal bellows corners?
« Reply #12 on: March 24, 2011, 06:45:37 PM »

Fred Aldous of Manchester sell grozing pliers - very fast mail-order service on all their craft materials & tools.  Actually it's probably the breaking pliers that Richard is describing.

http://www.fredaldous.co.uk/

Graham

Got it in one Graham, what they are listing as breaking pliers I know as Grozing pliers which are like Theo described, the others are (IMHO) purely smooth jaw pliers, we used similar but ground the noses round and backed off the jaws so they closed at the front (so you can see what you are doing) Either my old boys had historically used an alternate name (often the case in Norfolk) or they have become known as something else in the craft revival, anyway up hopefully you have prevented anyone ordering a different beastie someday ;)

Richard
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: How to crimp new metal bellows corners?
« Reply #13 on: March 24, 2011, 07:05:03 PM »

Mine look like the ones described as breaking pliers.  I found mine at a car boot sale.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal