Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Request for photos of reedblocks and couplers  (Read 6394 times)

0 Members and 1 Guest are viewing this topic.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Request for photos of reedblocks and couplers
« Reply #20 on: April 20, 2011, 12:57:52 AM »

Is it possible for you to post another photo of the Tommy with the bellows over the treble end?
Unfortunately not! (unless Lester's Tommy is a non-standard construction....)
It is not possible to view the treble end through the bellows cavity because the bass end of the Tommy is normally glued directly to the bellows frame; there are no bellows pins on the bass end at all, only on the treble end. Access to the bass end reed block is through the bellows cavity via the treble end. A moderate-length screwdriver is required to remove the bass end reed block.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Request for photos of reedblocks and couplers
« Reply #21 on: April 20, 2011, 07:14:51 AM »


Is it possible for you to post another photo of the Tommy with the bellows over the treble end?

Thanks!

Ed

Unfortunately the bellows on a Tommy are glued onto the bass end and therefore not removable to take a photo as you requested.

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Request for photos of reedblocks and couplers
« Reply #22 on: April 11, 2012, 01:05:16 AM »

I thought I'd try to revive this thread and ask for more information.

I am looking for photos and drawings of the mechanisms used to activate a register: treble, bass, or both. I'm especially interested in the linkages that pierce the palletboard wall. I've seen some tantalizing photos of sliding bars on the inside of a Hohner PA that were activated by a pivoting bar on the outside similar to Squeezy's Oakwood. Most of the photos I've collected show the inside of the instrument or the outside but rarely show enough information to give much of a clue as to how part A pivots/rotates/slides to activate part B (and prevent air leaks) which moves part C, you get the picture.

I'm working on the design for a 3v LMM 21/12 and need a reasonably easy mechanism that I can make without a full machine shop at my disposal. Though I'd still like to understand how, say, the mechanism bank on the Saltarelle that Theo renovated (piccys on his Facebook page?) works.

Lester, you provided some links to photos that are no longer available given changes in Facebook or Picassa, I don't know which. Any chance you can re-post links to the photos to the mechanism(s) of your Tommy, please?

Thanks.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Request for photos of reedblocks and couplers
« Reply #23 on: April 11, 2012, 07:48:47 AM »

Ed

This is the only one I can find of the stop mech on my Tommy it shows the slider in the middle of the shot which is operated by the stop on the top of the box. It is shown in the closed position and moves to the left to open the stop.

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Request for photos of reedblocks and couplers
« Reply #24 on: April 14, 2012, 09:07:09 AM »

I have been pondering using a pair of Bowden cables, such that the register slide is pulled up and down by each cable alternately (quite easy to do, just put a disc on each axle and a cable attached to either side of a radius). This has the advantage in that they are flexible and simple and work well in tension (bicycle brake cables for example). However, this means that you need two holes in your casework for each slide, with the problems with leaks associated with that, and I'm not sure how well the thing would work anyway. I suspect that it would need to be very well adjusted, which is always a pain.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal