Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner bass and treble nails  (Read 4488 times)

0 Members and 1 Guest are viewing this topic.

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Hohner bass and treble nails
« on: April 07, 2011, 01:47:12 PM »

I thought that I might take a deep breath and have a go at fixing an old Hohner which I'd like to get going but won't get too upset about if things don't work out.

The bass reeds are secured by round-headed nails and also nails which have a flatted top bent at 90 degrees to the shaft (they're L-shaped). There are also some of these L-nails on the treble end. These nails or tacks don't look very substantial and I think will break or bend when pulled out. Also I have no idea where to get replacements, as they don't appear on the CGM inventory. However, I can probably improvise some substitutes without too much difficulty.

I'd welcome any previous experience of dealing with these, I guess starting with the question of whether they are really necessary - bearing in mind other advice here in support of the use of wax only. I must also confess to a reluctance to hammering a couple of score of nails into it, if such can be avoided, although I could make an exception for the round-headed ones.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner bass and treble nails
« Reply #1 on: April 07, 2011, 01:51:26 PM »

If you use fresh wax the nails are not necessary.   Hohner stopped using them years ago.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

rmenhinick

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 113
Re: Hohner bass and treble nails
« Reply #2 on: April 07, 2011, 01:59:40 PM »

The "L" shaped nails don't necessarily need to be replaced.

I've just re-valved an old one-row Cajun box which had these holding the reedplates in place (with wax also). Just rotate the nails gently to clear the plate and then de-wax to lift the plates for working on. I think they are used to hold the plates in place while waxing. (simple diag attached!)
Logged
Old G Poker, New DG Poker, ADG Compadre, DG Sandpiper, CF Erica, GC Delicia Popular, DG Dino Baffetti Black Pearl 3, Casali Verona 48 bass PA, (Squeezebox Squirrel :D)

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Hohner bass and treble nails
« Reply #3 on: April 07, 2011, 02:16:22 PM »

I've just taken some Hohner reeds out of an old surplus reedblock (from a scrap PA) that were held in with those angled nails and using a fairly substantial pair of smooth-jawed square-nosed pliers they pulled straight out with no damage.  They're sitting in my spares box for re-use should I ever need them.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Re: Hohner bass and treble nails
« Reply #4 on: April 07, 2011, 04:09:27 PM »

Thanks to all for your advice.

I'll certainly forget about reinstalling these L-shaped nails.

I'm still a bit curious about the round-headed nails and the need for them. I can see why they are unnecessary on the treble end if the reeds are waxed in with some of Charlie's best and freshest, and, frankly, I'd dodge nailing there on any pretext. However, I can see that they might be useful to retain the heavier bass-end reeds, but I take it from Theo that they can safely be dispensed with on that end as well.

Am I right in that assumption?
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Hohner bass and treble nails
« Reply #5 on: April 07, 2011, 04:18:31 PM »

However, I can see that they might be useful to retain the heavier bass-end reeds, but I take it from Theo that they can safely be dispensed with on that end as well.

Am I right in that assumption?

I always throw them in the bin. Even the much heavier Cagnoni reeds I installed in an Erica are quite happy just waxed in with Charlies' best.

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Hohner bass and treble nails
« Reply #6 on: April 07, 2011, 05:06:59 PM »

I agree they are not needed and belong in the trash.  Many Cajun box builders use screws and wax. I was told that it helped the resonance, which made sense to me, but I tried it both ways in 2 different accordions and could tell no difference.  So now I use just wax, and I'm much happier.

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Hohner bass and treble nails
« Reply #7 on: April 07, 2011, 05:21:26 PM »

I agree they are not needed and belong in the trash.  Many Cajun box builders use screws and wax. I was told that it helped the resonance, which made sense to me, but I tried it both ways in 2 different accordions and could tell no difference.  So now I use just wax, and I'm much happier.

I agree with rmenhinick's comment above about the nails holding the reeds in prior to being waxed. However, they may also be useful in the regrettable situation where the box is left in an overheated environment (like an automobile trunk on a summer's day) where the nails would serve to retain the reeds in place until the wax cools.  Otherwise you might have a nice heap of sticky jumbled reeds at the bottom of the box :-[  
« Last Edit: April 07, 2011, 05:23:53 PM by j.w.forrest »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner bass and treble nails
« Reply #8 on: April 07, 2011, 05:31:22 PM »

However, they may also be useful in the regrettable situation where the box is left in an overheated environment (like an automobile trunk on a summer's day) where the nails would serve to retain the reeds in place until the wax cools.  Otherwise you might have a nice heap of sticky jumbled reeds at the bottom of the box :-[  

Probably not much of an advantage, the melted wax could just as easily drop onto the bass reeds which have been nicely held in place with nails.  It will be a mess whichever way.

None of the major box makers that I know of still use nails as well as wax.  Its really a non-issue.

As for holding the reeds in place while you wax them this is another red herring.   How do you hold reeds in place while you bang the nails in?  perhaps hold them with a drop of wax at each end. >:E
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Hohner bass and treble nails
« Reply #9 on: April 07, 2011, 06:08:38 PM »


Probably not much of an advantage, the melted wax could just as easily drop onto the bass reeds which have been nicely held in place with nails.  It will be a mess whichever way.

None of the major box makers that I know of still use nails as well as wax.  Its really a non-issue.

As for holding the reeds in place while you wax them this is another red herring.   How do you hold reeds in place while you bang the nails in?  perhaps hold them with a drop of wax at each end. >:E

While I agree with you in theory, my hyperactive mind was merely surmising the original intention of the nails. Perhaps the wax was inferior in the older models, and needed insurance. Were the nails driven after waxing? Perhaps the nails were driven in using a press, as hammering might be risky to a finished waxed reedblock. ???
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Hohner bass and treble nails
« Reply #10 on: April 07, 2011, 06:25:57 PM »

There are some interesting points of view on this subject so far. I'll add another.....

I have a 1930s C/F Club Modell III which I intend to restore. I took it along to the recent Melodeon Maintenance day at Mendlesham, a truly excellent event, which was very ably and professionally tutored by our very own Rees and Theo. (Thanks both!)

My instrument has zinc reed plates which are pinned on to leather gaskets using both 'L'-shaped and round-head pins. The reed plates need to come off the reed blocks for cleaning and re-valving. Also at the workshop day was Martyn White (also of this parish) who is also a respected instrument repairer and restorer, and a Hohner specialist. Martyn was attending in a sort of non-official advisory capacity. His advice regarding my reeds was to keep the nails and the original gaskets as far as possible and not to replace them with wax. To remove the reed plates, all you need to do (he said) is to gently twist the 'L'-pins to one side. When you are ready to replace the reed plate, just twist the pins back again.

I've not had a chance to start this work yet, but hopefully will do so in the next few weeks. I will keep an open mind about which methodology to adopt - waxing vs re-pinning. We shall see.....
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Hohner bass and treble nails
« Reply #11 on: April 07, 2011, 07:00:40 PM »

I'd agree with Martyn. If no wax was used on the original I would leave it that way.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Hohner bass and treble nails
« Reply #12 on: April 07, 2011, 07:11:48 PM »

I'd agree with Martyn. If no wax was used on the original I would leave it that way.

My old three row Hohner (seen in recently posted vids) has zinc reed plates retained by tiny screws and washers to leather gaskets. After 80 or so years of honking away, they are still right as rain, and a snap to remove/replace. I imagine the use of wax in later models reduced  labor costs on the production end.
Logged

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Re: Hohner bass and treble nails
« Reply #13 on: April 08, 2011, 07:50:17 AM »

I'd agree with Martyn. If no wax was used on the original I would leave it that way.

When I was first considering this job, my inexperienced inclination was to think that the best method was to follow the original closely, as that had presumably been designed or had evolved over time as the optimum answer to the problem of how to mount reeds and keep them in situ for ever after. In reality, it seems that methods have changed very little over the years despite new materials and technologies (except perhaps valve construction and materials), although they have been refined considerably by current makers and restorers.

It makes perfect sense that waxed reeds should be re-waxed, albeit without the pins and nails; and that "dry-mounted" reeds should stay that way. However, I'm sure that someone somewhere has refurbished a box and neatly reversed the reed-mounting method! It's also incredibly helpful for a tyro like me to know that the "L" pins can be rotated if necessary.

I shall therefore be heading down the wax-only route with this Hohner (a 2-row with the flower sprays in each corner), which has the benefit that I do get to pour hot wax on my fingers but don't have to hit them with a hammer as well.

Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner bass and treble nails
« Reply #14 on: April 08, 2011, 08:04:42 AM »

best method was to follow the original closely, as that had presumably been designed or had evolved over time...
Using no nails with waxed reeds does seem to be one such example of evolution

Quote
... as the optimum answer to the problem of how to mount reeds and keep them in situ for ever after.

"for ever" is not a helpful way to think about this.  Wax or nails or screws are specifically not permanent methods of holding reedplates because it is sometimes the case that some reedplates have to be removed, to replace broken reed tongues for example.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Hohner bass and treble nails
« Reply #15 on: April 08, 2011, 10:30:19 AM »

However, I'm sure that someone somewhere has refurbished a box and neatly reversed the reed-mounting method! It's also incredibly helpful for a tyro like me to know that the "L" pins can be rotated if necessary.


Not necessarily - the Hohner PA reeds I removed had both wax and L-pins throughout, and I'm sure were original. My Club II also has wax and mushroom nails.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal