Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Castagnari Max repair questions  (Read 3302 times)

0 Members and 1 Guest are viewing this topic.

OldDog

  • Good talker
  • **
  • Offline Offline
  • Posts: 89
Castagnari Max repair questions
« on: April 09, 2011, 12:24:38 AM »

Hi,
I have a Castagnari Max which I think the world of. The other day one of the LMMH pull knobs broke away from the wood slider. These are arranged MMLH on my box and the one (M) closest to me broke. It broke while I was pulling it out and the slider is now stuck in the operating position. I removed the end and took a look inside. It broke at the junction of the block that the pull knob is screwed into and the wooden slider strip. I won't touch it myself, but have a few questions about the repair. Will this be a difficult fix? The only repair man in these parts (Western N.Y.) that I know of works on PAs. Do you think that this is something that he might be able to repair? It seems to me that most PAs use metal sliders and he might not be able to do anything with wood.The other option is to take it to Button Box in Massachusetts, but I won't be free to do that until September. I haven't asked the local person yet, and it's perfectly playable as is, but I m trying to get an idea of what will be necessary before I approach him.

Thanks for any advice.

Regards,
Paul N.
Logged
Over the hill? What hill?! I didn't see no hill!

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Castagnari Max repair questions
« Reply #1 on: April 09, 2011, 01:04:33 AM »

Another question would be "why" did it break. Sometimes they can be fixed by levering the block up a little and getting some glue under there, but short of removing the top of the frame, it will never be as strong as it should have been new.  I put 2 nails in addition to the glue  on mine, which gives me peace of mind.

Was it very tight when you tried to move it?  If not, it may have had a bad glue joint.

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: Castagnari Max repair questions
« Reply #2 on: April 09, 2011, 12:57:22 PM »

The other option is to take it to Button Box in Massachusetts, but I won't be free to do that until September. I haven't asked the local person yet, and it's perfectly playable as is, but I m trying to get an idea of what will be necessary before I approach him.

Paul,
If I was in your shoes, I'd give Button Box a call.  They usually have a waitlist for repairs, and when your box is coming up in the list, they notify you to send the box.  Until then, play with it in the 'on' position! Or alternatively, and carefully, remove the reedblock, slide the slider into the off position, and replace the reedblock.  Best of luck for a speedy repair.
-Andy

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Castagnari Max repair questions
« Reply #3 on: April 09, 2011, 03:23:58 PM »

Ahhh, removable reed blocks.  Repairman's dream.

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: Castagnari Max repair questions
« Reply #4 on: April 09, 2011, 05:02:19 PM »

Ahhh, removable reed blocks.  Repairman's dream.

"You, too, can one day have removable reedblocks... removable reedblocks, they are not just for Italians!"

OldDog

  • Good talker
  • **
  • Offline Offline
  • Posts: 89
Re: Castagnari Max repair questions
« Reply #5 on: April 09, 2011, 11:32:31 PM »

Hi,

I'm going to take your advice, Andy, and contact Button Box and get on their waiting list. I've taken a couple of things there in the past and I am aware of the 4 - 6 month wait. I didn't know, though, that I could contact them early and get on the list like you suggested.

Thanks,
Paul N.
Tonawanda, NY
Logged
Over the hill? What hill?! I didn't see no hill!

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: Castagnari Max repair questions
« Reply #6 on: April 10, 2011, 12:42:29 AM »

I didn't know, though, that I could contact them early and get on the list like you suggested.

That's how they used to do it, at least -- give them a call and see if it will suit you.

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Castagnari Max repair questions
« Reply #7 on: April 10, 2011, 09:22:59 AM »

It shouldn't be a big deal to fix the problem, at least if both the slider and the piece of wood with the knob are intact. Remove the reed blocks. Make sure that both pieces are in the correct position when you glue them back together. A tiny drop of superglue in the right spot should be enough. Shouldn't that work, you can still contact a repair shop...
Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Castagnari Max repair questions
« Reply #8 on: April 10, 2011, 03:34:53 PM »

  A tiny drop of superglue in the right spot should be enough. 


You have much more faith in superglue than I do, the only thing I get it to stick to consistently is my fingers. :Ph

zippydw

  • Member
  • *
  • Offline Offline
  • Posts: 40
Re: Castagnari Max repair questions
« Reply #9 on: April 15, 2011, 07:30:10 PM »

You could work with Michael at Irishdancemaster.com.

He is located in Florida, but works with mailed in instruments. We did it for a switch installation on my little box a few years ago and things went well. just be sure to properly insure it. And he knows box guts in and out. one of his specialties is retrofitting switches etc so he certainly should be able to do a proper repair.

Google him.
Logged

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Castagnari Max repair questions
« Reply #10 on: April 16, 2011, 03:41:43 PM »

  A tiny drop of superglue in the right spot should be enough. 

Arrrghhh, superglue.  Repairman's nightmare.  :(

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Castagnari Max repair questions
« Reply #11 on: April 16, 2011, 04:29:45 PM »

Hi,
I have a Castagnari Max which I think the world of. The other day one of the LMMH pull knobs broke away from the wood slider. These are arranged MMLH on my box and the one (M) closest to me broke. It broke while I was pulling it out and the slider is now stuck in the operating position. I removed the end and took a look inside. It broke at the junction of the block that the pull knob is screwed into and the wooden slider strip. I won't touch it myself, but have a few questions about the repair. Will this be a difficult fix? The only repair man in these parts (Western N.Y.) that I know of works on PAs. Do you think that this is something that he might be able to repair? It seems to me that most PAs use metal sliders and he might not be able to do anything with wood.The other option is to take it to Button Box in Massachusetts, but I won't be free to do that until September. I haven't asked the local person yet, and it's perfectly playable as is, but I m trying to get an idea of what will be necessary before I approach him.

Paul,

Once the reed block is removed (just slightly loosen the two screws that hold the fastener tight against the top of the reed block, before you slide it back) it should be a simple enough job for an intelligent and competent woodworker to accomplish.

It's only a pity that Castagnari don't make "the block that the pull knob is screwed into" a bit larger (like it is in the old German and the Cajun boxes), so that the gluing area was bigger - and hence stronger...
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal