Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Noodle's projects  (Read 3282 times)

0 Members and 1 Guest are viewing this topic.

Noodle

  • Louder is better, right?
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 219
  • Occasionally actually helpful
Noodle's projects
« on: April 12, 2011, 02:54:20 AM »

Right. Now I've got myself a soldering iron, reed wax and other bits and have established contact with Mr Charlie Marshall, I've started to get busy with projects. I've got 2 on the go and I thought I'd document my progress on here in case anyone's interested or would like to give me some advice.

First up is a Russian (Homka) box. It's an strange, quirky little thing that no one really knew how to use before I started showing interest in learning due to its odd fingering (Does anyone know of an online fingering chart that you can edit?) and odd key. It's a 2 row 21 button single voice accordion (same note on push/pull) with 12 bass buttons. Before I started work on it, it only played in the key of F# plus F natural accidental.

I bought a set of Hohner Student accordion reeds off fellow forumer Andy Simpson and after a bit of thought, decided to put them to use. I removed the reeds from the box and cleaned the reeds up from the package from Andy, and decided to fit the outside row with reeds in the key of G with accidentals on the inside. This gives me a limited range of a single octave of the G scale plus 2 notes below. I also left one key blank to act as an air button, which was absent in its original form.

I plan to revalve the reedplates and will probably reshuffle the reeds about to take a few accidentals off and give me better range. Unless anyone has a set of melodeon reeds in G they wouldn't mind shifting...

Pictures to follow

Second project is a recent purchase from Theo Gibb for £25. It's a Herfield 3 voice in A/D (MMH) mess of a box with mildly rusty reeds. The reedblocks seem to have been half waxed in, half glued in. One bank of reeds have decent vinyl valves, the rest are leather which have shot it and need replacing. It has a broken spring in the bass mechanism. The bellows are knackered. Each corner has been taped up and both the bits of tape I removed revealed broken metal clips with one revealing a good sized hole.

I've started by getting to work on the reeds. I'm one reed block in and I've taken each reedplate off, cleaned the rust off with fine sandpaper, removed the old wax, valves and scraped the glue off, put new vinyl valves on and waxed them back on. It's tedious work but I'm relatively happy with the result of my second attempt at waxing. I'll have my first go at tuning once the rest of the reeds are done.

I'll be ordering a new spring and pallet facing from Charlie Marshall soon.

I'm not sure what to do about the bellows. Should I replace the tape with something that doesn't stick to the one on the next fold, which prevents the bellows opening properly? Should I just chuck them away and try to find something the same size, which probably isn't likely?

I shall post pics later
Logged
Nottingham, UK.

Hohners: HA114 (C), HA114 (G)*, Liliput (C/F), Preciosa (C/F)*, 1040 (G), Imperial. Dino Baffetti Binci III (D/G), Self-made Pariselle 2.6 (G/C), Soberano (C/F), Nopka garmoshka (F#)*.

One day I'll get really good, like those really good players. One day.
*to be fixed

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Noodle's projects
« Reply #1 on: April 12, 2011, 07:36:21 AM »


I'm not sure what to do about the bellows. Should I replace the tape with something that doesn't stick to the one on the next fold, which prevents the bellows opening properly? Should I just chuck them away and try to find something the same size, which probably isn't likely?

I suggest you start by stripping off all the black tape so you can asses the whole bellows.  If the corner gussets are free from holes it should be possible to replace the metal corners and apply proper bellows tape.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Noodle's projects
« Reply #2 on: April 12, 2011, 09:55:11 AM »

Good luck Noodle! I'm hoping to get back to my projects soon, once revision is over (:) I need to retape some bellows, reface some more pallets and tune...
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Noodle

  • Louder is better, right?
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 219
  • Occasionally actually helpful
Re: Noodle's projects
« Reply #3 on: April 25, 2011, 04:00:40 PM »


I'm not sure what to do about the bellows. Should I replace the tape with something that doesn't stick to the one on the next fold, which prevents the bellows opening properly? Should I just chuck them away and try to find something the same size, which probably isn't likely?

I suggest you start by stripping off all the black tape so you can asses the whole bellows.  If the corner gussets are free from holes it should be possible to replace the metal corners and apply proper bellows tape.

As soon as I've finished tuning, I shall do that.

Right, here come some pictures of the Herfield.

2 of the 3 reedblocks. Middle one has leather valves, most of which are in horrid condition. One on the right has vinyl valves, which I'm leaving on as they're in good enough condition:

Direct link

Treble lever mechanism:

Direct link

Blurry image a couple of bellows corners:

Direct link

Reeds with valves removed. Rust isn't all that bad. In fact that's the worst of it:

Direct link

Removing rust. Piece of card slotted behind reed and lightly sanded with fine grit sandpaper:

Direct link

New valves:

Direct link
« Last Edit: April 25, 2011, 04:05:51 PM by Noodle »
Logged
Nottingham, UK.

Hohners: HA114 (C), HA114 (G)*, Liliput (C/F), Preciosa (C/F)*, 1040 (G), Imperial. Dino Baffetti Binci III (D/G), Self-made Pariselle 2.6 (G/C), Soberano (C/F), Nopka garmoshka (F#)*.

One day I'll get really good, like those really good players. One day.
*to be fixed
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal