Hello, I'm new to this Forum and to the Melodeon. I just bought a very inexpensive One Row Melodeon on Ebay. It's a Lyra,German,I think made for Bruno out of New York back in the 1890's or 1900's.I'm just learning so it's great for me. I have done a lot of repairs to it, mostly glueing all the frame work together,repairing cracks in the wood,glueing reed blocks etc. My question is regarding the two bass valves and the air valve. They are the type that have soft leather to seal the hole and the leather is also the hinge,with a small hair pin type spring pushing it down. The air valve I redid with a piece of leather from a glove and it works better than what was there. Is there some kind of material I could use to redo all those valves that would seal the holes better? And should I make stronger springs? I know these Melodeons were made by the thousands and are relatively cheap and will not warrant having it repaired by a professional. I am just learning for fun and really enjoy the work of trying to make it better. Also the leather on the pallets is kind of worn and thin,what is best to use on them? Thanks to all, Tom