Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Treble action design help  (Read 6088 times)

0 Members and 1 Guest are viewing this topic.

Chris Cartwright

  • Member
  • *
  • Offline Offline
  • Posts: 33
  • Loffet G&B, Mengascini, Brandoni PA
Treble action design help
« on: April 30, 2011, 06:16:20 PM »

Hi all

I'm embarking on the adventure of building my first box, and would appreciate some words of wisdom from those who've gone before.

I'm starting with the treble end, and have been building a couple of prototypes.

I want to build a 2.5 row so the various 1-row designs illustrated herein (esp from Rees) with springs in front of the faceplate don't really work, I don't think.

I've been trying a simple construction for the pallet/key mechanism based around an L made of 2 pieces of steel 4mm rod joined at the bend by a brass block, which is also drilled to take an axle rod. The big problem I'm finding with this is that with the small width of block possible at the pivot (around 6mm) there is way to much lateral play which will result in leaking pallets.

This has led me to appreciate the design of traditional Casta-style open keyboards where the key rides in a long, deep slot which minimises both lateral and twist play. I'm currently trying to emulate this by riding the steel rod in a wooden slot. Jury still out on this one. I'm hoping once the spring is fitted this will reduce the play I'm seeing.

Meanwhile I've been trying to understand the trad Casta mechanism properly. I've read everything here and looked at the various close ups available (Lilly). I gather that there is a line of torsion springs sitting under the wooden key levers, held in place by an axle rod. I assume (but don't know) that there must also be another axle rod which passes through each key lever to form the pivot. Is this correct? If so, is it in front of or behind the point where the pallet rod emerges from the key lever? Do all 3 rows sit on a single axle rod in an 11/10/2 type trad design?


Any insights on this stuff would be most most helpful at this stage in the thought process.

Cheers, Chris.



Logged

Graham W

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 277
Re: Treble action design help
« Reply #1 on: May 01, 2011, 01:14:52 PM »

A couple of observations . . . I think you'll find 4mm steel rod is overkill and will make for a very heavy action.  Phosphor bronze is the more usual material for bushes running on a shaft as in this scenario, but brass will be cheaper / easier for experimenting with and isn't going to wear out very rapidly in this situation.  6mm width is more than ample for making your pivot with little or no lateral play, it sounds as though you've made the hole too big - the bush (pivot) only needs a minimum of running clearance on the shaft.  It's more about 'feel' than measurement but say around 1/2 a thou or so at a guess. Ditto endfloat.  Just drilling a hole is unlikely to be accurate enough - drilling slightly undersize and then machine reaming to clearance in a lathe or mill if you have access (Or even a good pillar drill)  is the way to go to ensure that they all come out identical in size, concentricity, squareness to the axis etc.   It's more model engineering than instrument making.

Casta type springs aren't torsion - they're a simple hairspring 'squashed' between the underside of the lever and the bottom of it's slot. The only axle is the one the levers pivot on.

If you hunt through the websites of every box maker you can find there are some very informative and interesting pictures to be found.

Good luck,
Graham
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Treble action design help
« Reply #2 on: May 01, 2011, 01:34:53 PM »

It is not just Castagnari who use the type of action you are describing, its used my most Italian makers, and they all(even Castagnari) use the same generic components.  You would find it very informative to get hold of an Italian box so that you can examine how it is put together.   Unless of course you want to be like Doug Briggs and make everything in house.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Chris Cartwright

  • Member
  • *
  • Offline Offline
  • Posts: 33
  • Loffet G&B, Mengascini, Brandoni PA
Re: Treble action design help
« Reply #3 on: May 02, 2011, 11:14:53 AM »

Thanks both.

Graham:

I selected steel rod as stiffness seemed to be the most important thing. Ali is obviously much lighter but you need much more thickness to get the stiffness. I calculated that the treble action would only weigh 0.1kg more using 4mm steel over ali. When you say the action will be heavier do you mean the feel (so momentum related) rather than mass? Also any thinner than 4mm has a lot of bend in it. The only way to address this that I can see would be to move to flat bar (but see below).

My Loffet (the only box I have access to close up) uses flat ali bar - similar config to a Hohner - ie bent at a right angle the difficult way at the pivot. Looks like Doug Briggs uses something similar. I can't find a source of this other than buying large extruded angle and cutting slices off it which sounds painful. Hence trying fabricating the right angle out of rod and a bush.

I wondered if I might have made the hole too big as you say (I drilled it 0.1mm oversize), but looking at pics of hohner actions it hardly looks like 1/2 thou precision -a thin bar going through a couple of bent steel pressings - so I assumed there must be something to design out the slop (e.g. having the spring registering the bush against one side of the hole) rather than relying on engineering tolerances.

Thanks for the clearing up the confusion on springs - this came from a melnet article that I must have misinterprested.

Theo:

Many thanks for the Doug Briggs link. I'd not come across him. Very interesting. Certainly looks more like where mine was headed. Am not trying to be different - just want to understand what the key design criteria are and pick from those that have worked.

Both: Any further thoughts on any of this most welcome.

Further question: Do the closed Italian boxes use the same wooden slot design as the open ones, or is it more like a hohner, or somthing completely different?

Thanks, Chris.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Treble action design help
« Reply #4 on: May 02, 2011, 11:45:14 AM »

For the same weight aluminium alloy is stiffer than steel, so if you want a certain stiffness for minimum weight use aluminium, even though steel is stiffer for a given thickness.  That is why aircraft are built from alloys of aluminium.

Round or flat - again flat will give you more stiffness for the same cross section area, which is why flat material is used for most levers.


My Loffet (the only box I have access to close up) uses flat ali bar - similar config to a Hohner - ie bent at a right angle the difficult way at the pivot. ...


...Further question: Do the closed Italian boxes use the same wooden slot design as the open ones, or is it more like a hohner, or somthing completely different?


I'm almost certain that Bernard uses the same generic action components as Italian makers.  These have a folded brass piece riveted on that forms the pivot.  I think these levers are cut out of flat stock, not bent at the pivot.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Chris Cartwright

  • Member
  • *
  • Offline Offline
  • Posts: 33
  • Loffet G&B, Mengascini, Brandoni PA
Re: Treble action design help
« Reply #5 on: May 02, 2011, 01:02:50 PM »

Thanks Theo

I was aware of the stiffness/weight thing. My problem is/was being constrained to round bar rather than flat then the diameter becomes the limiting factor - hence stiffness/dia rather than stiffness/weight.

I hadn't considered the option of cutting the L shapes out of flat stock. That makes sense. It would be very painful to do 'at home' in steel plate but perhaps not so bad in ali on a bandsaw. I'll do some tests.

Brass riveted collets I can do - I'm a clockmaker.

Cheers, Chris.
Logged

Chris Cartwright

  • Member
  • *
  • Offline Offline
  • Posts: 33
  • Loffet G&B, Mengascini, Brandoni PA
Re: Treble action design help
« Reply #6 on: May 04, 2011, 11:18:03 PM »

Hello again

On Your suggestion, I have scoured all the makers sites  I can find for pictures including
- Loffet
- Gaillard
- Serafini
- Van DerAA
- Bergflodt
- Luukinen
- Gaubert
- Pariselle (2.5 row making course photos)

Whilst there's lots of good stuff, on none of these can I find a picture of the pivot part of the treble mechanism (where the aluminium rods hinge on the axle) on an Italian style covered fingerboard box (ie aluminium levers rather than wood). This is typically because it is hidden under the front part of the fingerboard. There are pics of the hohner style mechanism (most notably on Bernard Loffet's site), but no Italian ones.

Does anyone have a pic of this part they could send me? Or even a detailed description of how it's set up.
Does someone like Carini sell these parts (they don't list them on their site)? From the similarlities it looks like several makers are using a bought-in mechanism and adapting it.

Thanks, Chris.




Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Treble action design help
« Reply #7 on: May 04, 2011, 11:26:09 PM »


Does someone like Carini sell these parts (they don't list them on their site)?
Yes, they have far more than is shown on their website
Quote
From the similarlities it looks like several makers are using a bought-in mechanism and adapting it.


Yes, as I've already said.

There are several pictures that should help in this facebook album of mine.  This is a public link so you should be able to browse all the photos.  The last four images in the album are all of the treble mechanism and you can see the axle rod, and the levers.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Chris Cartwright

  • Member
  • *
  • Offline Offline
  • Posts: 33
  • Loffet G&B, Mengascini, Brandoni PA
Re: Treble action design help
« Reply #8 on: May 04, 2011, 11:48:29 PM »

Thanks Theo - sorry for being dense.

I'll email Carini and see what I can get from them.

Thank you for the photos - they are certainly helpful, though frustratingly just short of having enough resolution for me to really see what is going on at the pivot.

Don't suppose you happen to have a higher res version of this one kicking around that I could trouble you for?

Thanks, Chris.
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Treble action design help
« Reply #9 on: May 05, 2011, 08:33:16 AM »

Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Chris Cartwright

  • Member
  • *
  • Offline Offline
  • Posts: 33
  • Loffet G&B, Mengascini, Brandoni PA
Re: Treble action design help
« Reply #10 on: May 05, 2011, 09:14:47 AM »

Thank you very much ukebert - that's a lot clearer!

This raises another question. Quite a few of these boxes use the mechanism here with the inner row of pallets hinged at the top.

But my Loffet along with many others hinges them all at the bottom, which seems more straightforward.

Is there any particular merit in doing it one way or the other that you're aware of?

Cheers, Chris.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Treble action design help
« Reply #11 on: May 05, 2011, 09:27:20 AM »

It enables you to have a row of pallets (and therefore reedblocks)  much closer to the keyboard where the geometry would not allow a simple lever to work.  As a result you can either design a more compact box, or you can get more reedblocks in for a given size of box. The downside is that the pallets nearest the keyboard can actually end up partly 'under' the keyboard and the sound from this row can be masked. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Chris Cartwright

  • Member
  • *
  • Offline Offline
  • Posts: 33
  • Loffet G&B, Mengascini, Brandoni PA
Re: Treble action design help
« Reply #12 on: May 05, 2011, 09:30:06 AM »

Perfect. I see. Many thanks Theo.
Logged

Chris Cartwright

  • Member
  • *
  • Offline Offline
  • Posts: 33
  • Loffet G&B, Mengascini, Brandoni PA
Re: Treble action design help
« Reply #13 on: May 05, 2011, 09:41:30 AM »

Hi all

Having studied the picture ukebert kindly posted in higher resolution, I have to say I'm still puzzled why this construction works well. It is in fact very similar to the Hohner construction with each lever pivoted via a pair if thin pieces of (probably) brass, riveted to the lever, which the axle passes through. In fact in this version these two pieces are even closer together than the hohner, at around 4mm rather than 6mm according to my measurements.

As I observed before, these hardly look as if they're made to the kind of 0.01mm engineering tolerances that Graham was discussing earlier, So I would expect quite a bit of lateral play given the short bearing surface (4mm). My hypothesis is that the spring action removes this play by holding the lever holes against the axle. However thinking about the geometry I can see how this would work to take out side to side play (ie the pallet moving left and right across the sound hole) but not the more critical rotational play (pallet lifting its left or right hand edge off the 'fondo'). Is this a known problem with this design? It looks like the fit of the spacers between the levers may be critical in addressing this.

Thoughts / observations welcomed.

Thanks, Chris.
Logged

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Treble action design help
« Reply #14 on: May 05, 2011, 09:50:03 AM »

As I observed before, these hardly look as if they're made to the kind of 0.01mm engineering tolerances that Graham was discussing earlier,

Precisely, they're made slightly undersized.
Logged

Chris Cartwright

  • Member
  • *
  • Offline Offline
  • Posts: 33
  • Loffet G&B, Mengascini, Brandoni PA
Re: Treble action design help
« Reply #15 on: May 05, 2011, 09:55:11 AM »

Sorry - I don't understand Andy. If they're undersized they wouldn't move on the axle. That's called an interference fit.

Chris.
Logged

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Treble action design help
« Reply #16 on: May 05, 2011, 09:55:58 AM »

Which is why you need to fit them properly to the axle yourself...
Logged

Chris Cartwright

  • Member
  • *
  • Offline Offline
  • Posts: 33
  • Loffet G&B, Mengascini, Brandoni PA
Re: Treble action design help
« Reply #17 on: May 05, 2011, 10:01:47 AM »

Oh I think I unerstand what you're saying now.

They are supplied from Carini (or whoever) with undersized holes which you ream to fit the axle. Did I get it?

Thanks, Chris.
Logged

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Treble action design help
« Reply #18 on: May 05, 2011, 10:04:08 AM »

Yes, more or less exactly as Graham said in the first reply.
Logged

Graham W

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 277
Re: Treble action design help
« Reply #19 on: May 05, 2011, 10:07:25 AM »

Here is a dimensioned pic of the Carini lever, showing 6.1 mm across the outer width of the bearing .

http://www.flickr.com/photos/graham-w/5689314737/


As an aside, does anyone know what action Gaillard uses, because that is truly sublimely smooth, light and fast?
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal